Forum clan ChPUshnikov

User info

Welcome, Guest! Please login or register.


You are here » Forum clan ChPUshnikov » Programs for CNC-frezerov. » VisualMill - developing mnogoosevuyu processing


VisualMill - developing mnogoosevuyu processing

Posts 401 to 450 of 836

401

Z8.1350
Z31.0000
(Rotate Table Operation)
G00 Z0.0000
X0.0000 Y0.0000
A+90. F10160.
(Horizontal Roughing)
G01 X24.9029 Y-42.6828 Z31.0000 F3000.0
Z23.4582
Z22.8232
X24.9021 Y-43.9528 Z22.6027
X24.9029 Y-42.6828 Z22.3821

Here is about than I say. Not goes in the upper hand and all. Not know where this prescribe. Do this in manual. But want that would all bolo autonomously

0

402

TimoXa wrote:

That about than I say. Not goes in the upper hand and all. Not know where this prescribe. Do this in manual. But want that would all bolo autonomously


Witness tab Clearence. Usually in it am running podyomf on wasn’t even above.
There many preset. Vybtrayte the contestant, which you analogy.
Likely deal in it.

0

403

TimoXa wrote:

I tried to work with turn the table. But the problem is that I cannot correctly draft ing lu. All well, but when need to reverse the table, blowers not goes on levels on is, she simply rips through stocking. I not know where touted this function, that would he after one a plane rose on safe levels and then A + 90 and was cutting further. Account for prescribe this in manual, but like would that would all was autonomously.


As something times this I already described - read.

0

404

Xander1980 wrote:

Skyfall opened forums again putting VisualMill 2012

This Professional version of or Premium? 5-capable to processing supports?
Like has understood with VisualMill Professional, but raze not can spinning his to his machine. In my disposal 5-koordinatnyy ecological with the turning table, with turning plan-puck is 5-oops hinge, and 4-I axis replies for sloping the table. In general, 4-coordinate milling figurines around the circle with the help VisualMill Professional not goes. Like would find Premium version of for full-fledged continuous 5-border protection grids processing.

0

405

Tried its newer model. All well only not gather additionally in any way on what such a the economic vizualization.

0

406

Put I this piece of software. Sculptur goes well. And here is when open for example socket very long thinks. In than deal or "something with memory my became"

0

407

peka wrote:

put boiling water I this piece of software. Sculptur goes well (only in end after manipulation not in cylinder,) A here is when open for example socket very long thinks. In than deal or "something with memory my became"

0

408

Emerged version of 2014. There some goodies, as for example - the majority word processing HSM, "embellishment. Someone on the vastness of networks met your for this programs (if attainable already exists)?

0

409

There is no whether - to proge VisualMill. On Forum not has found. On English a little hard to do study.

0

410

Sought, too,, Russification there is no, sit already week, brains breathtaking

0

411

Why so is obtained after visualization not gather additionally in any way http://s8.uploads.ru/t/RqPmh.jpg

0

412

Kvarz12
igor79
ShadowVoice
It seems that program special popularity not enjoys guys. On this, think translation seek futile, and all the more treatment for past versions of. Although, with other hand in of last version of (2014), added new strategy processing. Can popular such in the near future required €for treatment. And until be content capricious but affordable version of the.

0

413

I so understand that this a glitch things. Did will have teach PowerMill, quite complex program. That would. The entire the problem in 4 th axis

0

414

Kvarz12 wrote:

why so is obtained after visualization not gather additionally in any way


Not observed this message. This not a glitch, well normally. You podredaktiruyte length tool and then under sham not will remain material. And red lines - this podrezy. Closely examine model and ing lu, likely blowers falls below axis model. I soon will try still lessons do, only time I have quite lacks. Me very much need to study - not keep up.

0

415

Hidden text:

To view hidden text please login or register.

0

416

Kvarz12 wrote:

Is will have teach PowerMill


Watched VisualMill, truth not long.
Now downloaded Powermill 2012, explore, the study of goes successfully.
Powermill me very grassroots!

0

417

The apparently under hand Vectric Aspire interesting progressive Rock but on English What you can say about it

0

418

Aspire entirely new program -modelirovaniya terrain 3-D, and processing on FVC with CNC, chase carving projects, such as there decorative decorative panels and doors, zoo Goods products, most recent architectural moldingi, logos companies to request, jewelry, elaborate to request gifts and rewards. Plus many other applications.
Unique 3D-tools Aspire allow easily work with existing 3D-model and to build their own 3D-figures. Aspire is based on engine programs world-class VCarve Pro and uses's the embedded same logical and simple in using interface.
With Aspire, users can quickly and easily to convert thumbnails 2D, photos, drawings and graphics in unique high-quality a groove in 3D.

0

419

In VisualMill RhinoCAM and when I try do trajectory, where, a wasp is being shifted in red, there is mistake on the picture
http://s8.uploads.ru/t/YTV5c.jpg
http://s9.uploads.ru/t/Q28pG.jpg
http://s9.uploads.ru/t/XUM0V.jpg

Last edited by hak1 (Mar 8 2014 00:51:14)

0

420

hak1 wrote:

In VisualMill RhinoCAM and when I try do trajectory, where, a wasp is being shifted in red, there is mistake on the picture


Here is other on picture, red line. This simply idle displacement such.
http://s8.uploads.ru/t/3g8nx.jpg

0

421

Thanks for Sharing (your the answer. I not understood, that I can establish red line?

0

422

http://i021.radikal.ru/1105/44/ed6ccf2de651.jpg
hak1
You need Western Jackdaw put here: Cut 2023) Containment - > Do not cut below, and recast 0 or positive significance.

+1

423

Guys urge all actively seek last version of (with cure) programs. Smallness of studied basement, should tell those impressed!

0

424

BOBAH44

There are already 2014. Support 64 bits OS, heap new strategies processing.

0

425

skedram wrote:

BOBAH44

There are already 2014. Support 64 bits OS, heap new strategies processing.

Already long looking for this version of the. Until quiet full (
, too, very want try its in work.

0

426

Skedram large thank you for material.
Week struggle with leave the computer on and progoy not has passed a gift.
In end and I received his wooden... Oscar- :flag:

0

427

Yes-yes, I already everywhere where hasn 2014 version of sought.

0

428

I, too, not find 2014

0

429

Dobryi evening! Help the teapot pick a postprotsessor for nc-studios. 3-'s axial, connects on X. In artkame for povorotki in asymmetry on X have been putting 200mm. On engine there is nadpist 1\ 20. If accurately to follow lesson the twisting that shit, hope postprotsessor not suited

0

430

, AXEMAN AND WOMAN. 'm colonizing VisualCAM 1.0

0

431

I have a glitch in proge VM or so should be.
Under 4th Axis hanger (company) in Step Down Control (Dr) give Distance 1mm, and in visualization would still Takes on full the discretion that has to (in 2023) Cut Levels)
This only if not ask regulatory Lesbian bitch (two circle on tortsam billets cylinder) then on Z step goes double As pointed out.
Has tried lesson topikstartera (Thanks large! This those the most nuts and bolts which sometimes och lacks for starters experimentation and further training / understanding of, although would method tyka)
But decided to do... Oscar-draft and the next turn on 45 • and again draft, again turn and camping on D.. Screwed up slice of the handle from shovels :) camping on K. Machine has passed 1 the grunt under 0 • and further should was orient on 45 • and start 2 the grunt. But the speed reverberates put F1000 and 4os starters turn slowly, and second company already went cut :))) readily available rugged (birch) breath was cool, on entire depth was cutting. In another times saw as does freeze time in brain :)
Now for each draft d to do its Jeul Pan, and rotate manually. Or stuck put in really where turn A - F5000?
Method tyka and viewing visualization och quickly progressive Rock beginning to be!

0

432

Here is'm colonizing on the sly strategy, could you tell me in what strategy for turning axis can be create the ceaseless rotation billets., camping on E. Zaglubilas rotating blade and with step 0.2 has passed all detail. (Thus method want avoid problems play on Mastergear turning axis) http://sc.uploads.ru/t/c0t2C.jpg
To being asked podema tool after every turnover.

Last edited by saniaS (May 7 2014 11:18:26)

0

433

Tab Create > 4 Axis > 4th Axis hanger (company)
Or Create > 4 Axis > 4th Axis Finihing (last but)
In the first case Step Down Control (Dr) - > Distance the depth of cut for 1 Passage
2023) Cut Levels - Bottom (B) on what maximum depth permitted to go instrument (by default rotten templates)
Cut Parameters - > Cut Pattern selecting as will go bifidobacteria along billets or around the circle. T. E. Has passed along, turned or has passed around the circle and has shifted along)

In chistovoy there is no step deepening, but also can be ask maximally possible depth of call tool, to tsangoy not offense stocking. Sut 2023) Containment
Like so.
Prima my previous post. I have without lateral of restrictive circles under draft immediately deepens on entire depth until details.

http://yadi.sk/d/jW5GvKE0PND66

I have not boat passes entire detail. On the screenshot shown tabs.

Last edited by darksega (May 7 2014 11:49:22)

0

434

http://sc.uploads.ru/t/Jbx8j.jpg
Me would like to remove these unnecessary podemy. And about processing shades in strategy 4Axis finishing fielded now for 2 passage, as process end'm gonna post picture.

0

435

saniaS
Have you crusade in Cut Parameters > Cut Pattern is worth "Zig" and need to "ZigZag"

But thus perhaps rotation will there-here, and this + taking :(
Can then safe levels rise of to remove as thread or reducer fix :)

Last edited by darksega (May 7 2014 12:21:41)

0

436

Looked your picture, me seems you not there'll eat material configure http://sc.uploads.ru/t/RQHOq.jpg

0

437

darksega wrote:

saniaS
Have you crusade in Cut Parameters > Cut Pattern is worth "Zig" and need to "ZigZag"

Under "ZigZag" keep on turning will 360 on-hour and back, and as a consequence on Adjustments play in Mastergear, distortion drawing. Such a strategy I already made and actually right in artkam, so and have been arguing in rinokam create the ceaseless rotation (if possible).

0

438

All correctly
Step Down Control (Dr) - > Distance the depth of cut for 1 Passage. And wasn not so written in this PDF?

0

439

I have, too, not broke a in chistovoy processing do two the aisle http://sb.uploads.ru/t/diCjG.jpg

Last edited by saniaS (May 7 2014 12:33:11)

0

440

Try on the tab Shuttle > Shuttle Plane Defintion > put Stock Max R + Dist =0
Cut Transfer metod > skim =0 (though can be and Shuttle Plane to leave. Like)
Try come play on this the tab.

- added.
Yes all correctly. Now not is rising tool after turnover. Although I have detail declaring the, ca and on bugristoy also we norms will?

Last edited by darksega (May 7 2014 12:33:29)

+1

441

With pane ends billets around the circle try draw it and point to their as restrictions for such. Only then I have under draft is beginning to borrow layers, and without them on entire depth.

0

442

darksega wrote:

Try it on the tab Shuttle > Shuttle Plane Defintion > put Stock Max R + Dist =0
Cut Transfer metod > skim =0 (though can be and Shuttle Plane to leave. Like)
Try come play on this the tab.

- added.
Yes all correctly. Now not is rising tool after turnover. Although I have detail declaring the, ca and on bugristoy also we norms will?

Edited darksega (Today 12 :33: 29)

Yes, like here podemy configured out.

0

443

He was playing with settings, apparently without podemov raze (http://sb.uploads.ru/t/JcwbH.jpg

0

444

Himself still not has tried, but in this proge there is like projection the aisle on detail. Can try to build a supporting spiral around the entire the details and pitch on it mill, and then with project Passage on detail, although not am confident that for 4 such work.

Here is here other: 4th Axis Engraving > Cut Parameters > Cut Level Control > prove a jackdaw there is Project Curve (’ s) to model-until not has understood in what place Lesbian bitch to point fingers? And then depth cut perhaps need to questioning 0.01 camping on K. Recognized on detail sproetsiruet.

Screen not is obtained download. Staff error: Please resend. Spiral a spring balled on stocking. Have been arguing now. Maybe, you its project on detail. I don't know how to do this. Need to seek.

Last edited by darksega (May 8 2014 10:00:53)

0

445

Here is the first work, truth with commercialization on spiral still not figured that out, suspect that can be done only in Power Millais. http://sc.uploads.ru/t/cw41G.jpg

0

446

saniaS
Super!
And what machine? Homemade?
I have a small for work on dyuralyu SK router! 3020BZ with battlefields 300kh200mm.
And how many time is done such a detail came out? Immediately chistovoy or with draft?
And on any liquid molecules?
I do free model airplanes for themselves - patterns decor. 100kh100mm with step 0.2mm. On speed companies of the / sec so and a half hours on full detail moves away.
And so’ve worked in Ghemme new 3-D 10.

0

447

Interestingly. I have the speed 40mm seok higher machine keeps sticking

0

448

Perhaps all ??? 700 mm / shadowing Command goes. And not sec. :)
I don't know in mache F700 writes.
Here are some my work:
http://yadi.sk/d/HHaosfiSQ6Ztf
http://yadi.sk/d/IFzZu1tkQ6bdg
http://yadi.sk/d/lpYEPmJTQ6bhk

0

449

Yourself a nice, funky balyasina,, too, want type such do http://sb.uploads.ru/t/JgWpQ.jpgSurface Polishing Machine homemade from plywood, method trial and mistakes came to speed about 1000mm per minute (though've been crop-and until 6,000), for chistovoy processing the very optimally, step 0,2mm about 5 hours has worked, (if different motives with commercialization on spiral think will in been faster. The grunt did, too, on its a lathe: (((Was stupid smallness of, camping on K. Spindle first. Zamanalsya meat choose, as raze dozen 140mm (need to was at work do the grunt on panel 7Kw))

Last edited by saniaS (May 14 2014 08:19:04)

0

450

What frezoy diadem work (dozen and length)

0


You are here » Forum clan ChPUshnikov » Programs for CNC-frezerov. » VisualMill - developing mnogoosevuyu processing