Forum clan ChPUshnikov

User info

Welcome, Guest! Please login or register.


You are here » Forum clan ChPUshnikov » Programs for CNC-frezerov. » VisualMill - developing mnogoosevuyu processing


VisualMill - developing mnogoosevuyu processing

Posts 251 to 300 of 817

251

I have the problem with commercialization of an arm. Why some parts of progressive Rock not wants process. Who any with so rebuffed? Podskajite that I not so do.
http://s3.uploads.ru/t/CXvd1.jpg

0

252

Mohammed
Try this one increase the Drina such in settings. Likely tool a short, although model strange as the obrabotalas. This 4-'s axial Jeul Pan?

Last edited by skedram (May 2 2013 11:10:37)

0

253

skedram wrote:

Mohammed
Try this one increase the Drina such in emotionaI setting. Likely tool a short

Has tried. Not is obtained. And can be whether do to axis screwed on just only on 180 degrees and not 360 under processing?

0

254

skedram wrote:

Mohammed
Try this one increase the Drina such in settings. Likely tool a short, although model strange as the obrabotalas. This 4-'s axial Jeul Pan?

Edited skedram (Today 11 :10: 37)

Word processing 4-'s pump turbine. All on your lessons of. Has tried and different length. And direction cut. And it not helps.

0

255

Mohammed
« me file, pokovyryayu on the evening.

Магомед wrote:

and can be whether do to axis screwed on just only on 180 degrees and not 360 under processing?


http://s54.radikal.ru/i144/1105/18/4faefa84c287.jpg

Start angle and End angle. Write the right corners starters and of the late reverberates.

0

256

skedram wrote:

Mohammed
« me file, pokovyryayu on the evening.

Start angle and End angle. Write the right corners starters and of the late reverberates.

http://yadi.sk/d/ub33wvW04VlZi

0

257

Магомед wrote:

http://yadi.sk/d/ub33wvW04VlZi


You need to try process on 4 st sides Since twists 90, 90, 0, 180. Model same not round and square.
In the early process face, then computer by, and if need to the the back side.
From musculaire such such "a glitch" not emerge, this will be in sight under sham only. There where clashes, program will show red color trajectory.

0

258

Igor44 wrote:

you need to try process on 4 st sides Since twists 90, 90, 0, 180. Model same not round and square.
In the early process face, then computer by, and if need to the the back side.
From musculaire such such "a glitch" not emerge, this will be in sight under sham only. There where clashes, program will show red color trajectory.

I need process three hand. Boca and the upper hand. An effort not need. How to do this?

0

259

Магомед wrote:

I need process three hand. Boca and the upper hand. An effort not need. How to do this?

Simply borrow odnostoronyuyu strategy. After one storny are posing turn the table for example on 90 degrees. Process other side, then turn the table on 270 degrees and even times process. The only can will have to do limiting a plane, that would blowers, for example under cutting computer by not’ve been on Hero lets side or limit move such on axis Z.
Now very once me, and so would I was able you faylik send.
If on time expect them, then on days will be able do.

0

260

Increasingly simply is done in artkame. Mohammed I you in lichku look, you have signed.
http://s2.uploads.ru/t/erGwT.jpg
http://s2.uploads.ru/t/l5kJv.jpg

0

261

Igor44 wrote:

If on time expect them, then on days will be able do.

I'll wait. Not the problem. D very appreciate it you for aid. Would still tokarka in path me)

0

262

Mohammed

, I could even watch I on your model. Such a model on povorotke to do not encourage. Here I would argue with Igor44. Need a mnogopozitsionnaya word processing. And in this case artkam much feel more comfortable. Pokavyryayte forum, must be such examples.

0

263

skedram wrote:

Mohammed

, I could even watch I on your model. Such a model on povorotke to do not encourage. Here I would argue with Igor44. Need a mnogopozitsionnaya word processing. And in this case artkam much feel more comfortable. Pokavyryayte forum, must be such examples.

Brackets on tokarke to do - not the most cheerful option. Increasingly is done without obstructions on flat 3-'s koordinatnike
http://s3.uploads.ru/t/sDyOb.jpg
http://s2.uploads.ru/t/Y6sec.jpg

+1

264

SANKAR-3D wrote:

brackets on tokarke to do - not the most cheerful option. Increasingly is done without obstructions on flat 3-'s koordinatnike

And if not hampers the can be a small tutorialchik on subject of an arm and representative, I truth 3 day explore rinokam 2012 my for your brain, something not podsilu this understand.

0

265

SANKAR-3D wrote:

I in Reno never worked - increasingly do in Artkame. Question as do swivelling on usual flat 3-'s koordinatnike or on tokarnike? In fix specifically predicament?

To do need to as the so)

Ah awesome)) and pithy and with pictures. Interestingly as, too, most, but in rhinocam implemented valid other on frezere.

0

266

SANKAR-3D wrote:

I in Reno never worked - increasingly do in Artkame. Question as do swivelling on usual flat 3-'s koordinatnike or on tokarnike? In fix specifically predicament?

To do need to as the so)


Face cut out, here like all understandable, but as you then a Cut on a lighter, more accurately as are giving a precise from falling after coup, yes and as coup accurately on 90 will (all on stage training billets or that challenging)? And as stocking hold on tight to table at the work you with Facial and side flapped surfaces?
The as do I, me until not very suits, can there is what Smart receptions :)

0

267

Tell please want try to remove in ing lu unnecessary sink, as and in than this do? Under a circular frezerovanii Baluster-shaft in one side rotating blade under turnover raised in point zero then back falls! Want do so to not was walking up tickles itself lines? (Not offer a obabotku Sieg zag and camping on To)

0

268

Фрезерок wrote:

statement please want try to remove in ing lu unnecessary sink, as and in than this do? Under a circular frezerovanii Baluster-shaft in one side blowers under turnover raised in point zero then back falls! Want do so to not was walking up tickles itself lines? (Not offer a obabotku Sieg zag and camping on To)


Ah times bear in hand-to-hand, then robіt this in CIMCO Edit.

0

269

Hello could you tell me as accelerate work programs, and the that the for so long thinks.

0

270

Please help me with problem. Write UE for of an arm on tokarke. Strategy processing Parallel finishing and after processing one hand I'm turning it the table on 90 degrees. The problem in next: Before a turn I have Z goes on intended and so as harvesting not square the in the process reverberates I have bugging up a blank. Here is part of code. As be in this situation?

X-83.3100 Z-69.3065
X-82.9350 Z-69.5184
X-82.7475 Z-69.7159
X-82.6538 Z-69.8635
X-82.6069 Z-70.0257
Z-69.4257
G00 Z10.0000
(Rotate Table Operation)
Z0.0000
X0.0000 Y0.0000
A-90. F10160.
M5 M9
M30
http://s2.uploads.ru/t/9VuCL.png

0

271

Mohammed
I same wrote. There there is in strategy point Clerance, ah accurately not remember as on English so. But sense hood — the same, that road occupying.
So here is there heap parameters. There is distance from details, there is distance from templates.
Here is there put achieve escape figure and before a turn the table, rotating blade is rising on this distance.

0

272

On opened forums again putting VisualMill 2012

Hidden text:

To view hidden text please login or register.

0

273

Магомед wrote:

X-82.9350 Z-69.5184
X-82.7475 Z-69.7159
X-82.6538 Z-69.8635
X-82.6069 Z-70.0257
Z-69.4257
G00 Z10.0000
(Rotate Table Operation)
Z0.0000
X0.0000 Y0.0000
A-90. F10160.
M5 M9
M30

Ah or manually change string Z0.000 on achieve escape levels rise of axis, to example -Z 10 (20 or 50)

0

274

Igor44 wrote:

Mohammed
I same wrote. There there is in strategy point Clerance, ah accurately not remember as on English so. But sense hood — the same, that road occupying.
So here is there heap parameters. There is distance from details, there is distance from billets.
Here is there put achieve escape figure and before a turn the table, blowers is rising on this distance.

Has tried I so as you spoke. Not is obtained. He would still empties before as reverse up a blank.

0

275

Pro

Магомед wrote:

has tried I so as you spoke. Not is obtained. He would still empties before as reverse stocking.

Test, see closely parameters.
Here is now repeated s situation. Here are skriny and slice of G-it.
On skrinakh. Itself configuring, the rise from details on 20mm
At the other in sight as this's pinging in rinokam, but on third visible trajectory in MASN.
There in sight, that before a turn is faring the rise on Z.
http://s2.uploads.ru/t/DLgZp.jpg
http://s2.uploads.ru/t/hMBLv.jpg
http://s2.uploads.ru/t/gHs5r.jpg

And here is slice of UE
Large allocated the rise on axis Z before a turn the table.
As prichine increasingly works, verified repeatedly.
X-0.5000
Y4.1250
X-19.5000
Y4.5000
X-0.5000
Z5.6000 F500.0
G00 Z35.0000
(Rotate Table Operation)
A-90. F10160.
(Parallel Finishing-1)
X-19.5000 Y-4.5000
G01 Z5.6000 F500.0
Z5.0000 F200.0
X-0.5000 F750.0
Y-4.1250
X-19.5000
Y-3.7500
X-0.5000

0

276

Made so as you said. Here is code
Z-29.2628
X-86.4152 Z-29.6270
X-86.2277 Z-30.1126
X-86.1340 Z-30.4989
X-86.1105 Z-30.6600
X-86.0929 Z-30.8855
Z-30.2855
G00 Z50.0000
X-46.1847 Y37.6008
G01 Z-31.4920 F4000.0
Z-32.0920
Z-31.4920
G00 Z50.0000
(Rotate Table Operation)
Z0.0000
X0.0000 Y0.0000

A-90. F10160.
(Parallel Finishing)
Z90.1609
X-35.6554 Y-1.5600
G01 Z-23.1750 F4000.0
Z-23.7750
X-35.6261 Z-23.5078
X-35.6027 Z-23.3905
X-35.5090 Z-23.0624
X-35.4152 Z-22.8190
And still I spoke not pro equilateral square scantlings. So as on my skrine in sight that harvesting not ravnostoronnyaya. And under turn-zero nominal point are gonna change so as computer by wider than itself high.

0

277

Strange have you G-kod, and what postprotsessor’re using?
And the that harvesting rectangular construction. So this without difference, 're putting on Z the greatest levels and increasingly.

0

278

Igor44 wrote:

Shpak have you G-kod, and what postprotsessor’re using?
And the that harvesting rectangular construction. So this without difference, 're putting on Z the greatest levels and increasingly.

The usual that in the list. On Mach3 mm

0

279

Магомед wrote:

the usual that in the list. On Mach3 mm

Text file on-me I'll take a look, only zazipuy his.
goga44@list.ru

0

280

And another problem. When I'm turning it stocking not can raze deal in limiting depth rezanii. Me on the sides of the bell for example maximum need to 10 mm in diameter deepen and she I have ostentatious almost until than half.

0

281

Магомед wrote:

and another problem. When I'm turning it stocking not can raze deal in limiting depth rezanii. Me on the sides for example maximum need to 10 mm in diameter deepen and she I have ostentatious almost until than half.

Looked.
You. Put it detail on center axis reverberates.
This same have you which held its fourth axis, and you of habit-dusting as on three-axle the loom.
That would blowers not commanded below a plane far you need to, you cramp depth 5m such. Another way to, this ogranichivayushie a plane.

0

282

SANKAR-3D wrote:

There simply is done in artkame. Mohammed I you in lichku look, you have signed.

Can you will share experience work with artkam in 4 osyakh. In vizulmil quite I have nepoluchaetsya, goes mistake.

0

283

Simply:

In settings press VisualMill prescribe Tool convened position, camping on E. Pozitsia change of instruments - place far divert tool efore turn the table / for change of instruments.

In section create 4 axial processings the first menu - 4x axis Title block Machining kind Options / there must be the tick on Always retract tool to Tool change Point before Table Rotate modifier kind.

All.

Now before a turn the table tool leaves on these a, the table firm Obama turns and machine will continue work.

+2

284

Made as in the early themes was described by.
Goes here is such a mistake.
http://s0.uploads.ru/t/FHXcr.jpgif say but the goes here is this http://s0.uploads.ru/t/GzAl4.jpg

Last edited by 4142 (Jun 20 2013 12:22:13)

0

285

4142 wrote:

made as in the early themes was described by.
Goes here is such a mistake.
If say but the goes here is this

Edited send (Today 12 :22: 13)

In the first Summit write, we gotta switch involving from poligonalnogo in vokselnoe. In settings sham.
This always when mnogostoronyaya word processing is faring.

0

286

Igor44
You can say as switch?

0

287

4142 wrote:

Igor44
You can say as switch?

http://s0.uploads.ru/t/T0kru.jpg

0

288

4142 wrote:

made as in the early themes was described by.
Goes here is such a mistake.

This mistake somehow this when WordPad not pulling. At all this progressive Rock quite a fractious relative to resources computer.

0

289

People, would still not was able correct this mistake. Who any they are able do .nc file on 4-'s osyakh, dam model in indicate present?

0

290

People, the problem. Created model, gave center, running an OK-code. Asked the grunt processing with 12 mm frezoy. When launch an machine, he I have not goes in model and churchgoers 29 mm higher on the surface. Can I center model wrong gave or the problem in another.? http://s5.uploads.ru/t/uwbNW.jpg

часть ж кода

%
N1 G40 G49 G80 G98
;4 th Axis Roughing
N2 G20 G90
N3 S7500 M03
N4 G01X-222.5Z46.1661A0.F2.7
N5 Z29.7386A0.
N6 X-215.Z29.729A0.F3.7
N7 X-161.8438Z28.7686A0.
N8 X-161.1758Z29.0138A0.
N9 X-160.6748Z29.0612A0.
N10 X-148.4873Z29.0563A0.
N11 X-147.1455Z28.9984A0.
N12 X-146.8101Z28.94A0.
N13 X-146.4746Z28.8001A0.
N14 X-146.1392Z28.5939A0.
N15 X-145.8037Z28.301A0.
N16 X-145.636Z28.109A0.
N17 X-145.3215Z27.588A0.
N18 X-145.1328Z27.0051A0.
N19 X-145.1094Z19.8453A0.
N20 X-144.125Z21.0671A0.
N21 X-143.9375Z21.2635A0.
N22 X-140.75Z23.4877A0.
N23 X-140.Z23.7265A0.
N24 X-137.2344Z24.4958A0.
N25 X-125.1875Z24.4907A0.
N26 X-122.Z24.2186A0.
N27 X-120.5Z23.5982A0.
N28 X-118.7202Z22.8015A0.
N29 X-117.3359Z21.6184A0.
N30 X-117.3125Z21.6249A0.
N31 X-114.9944Z25.1368A0.
N32 X-114.9834Z25.8724A0.
N33 X-102.5Z25.8664A0.
N34 X-101.Z25.8396A0.
N35 X-99.5Z25.7163A0.
N36 X-98.5625Z25.4344A0.
N37 X-97.9063Z24.9297A0.
N38 X-97.5078Z24.1369A0.
N39 X-97.3906Z23.0793A0.
N40 X-97.3789Z22.3214A0.
N41 X-88.8125Z21.8704A0.
N42 X-88.625Z21.6638A0.
N43 X-88.25Z21.4981A0.
N44 X-87.875Z21.406A0.
N45 X-86.75Z21.2753A0.
N46 X174.0859Z7.7091A0.
N47 X174.1094Z7.8723A0.
N48 X174.1515Z8.915A0.
N49 X174.1936Z9.1235A0.
N50 X174.2778Z9.3441A0.
N51 X174.4463Z9.6055A0.
N52 X174.7832Z9.8992A0.
N53 X175.1201Z10.0568A0.
N54 X175.6255Z10.1303A0.
N55 X180.5078Z10.131A0.
N56 X180.6638Z10.5218A0.
N57 X180.9758Z11.1136A0.
N58 X181.4438Z11.6935A0.
N59 X181.7559Z11.9571A0.
N60 X182.3799Z12.3034A0.
N61 X183.1599Z12.4518A0.
N62 X195.25Z12.4499A0.
N63 X199.75Z12.3461A0.
N64 X200.5Z12.2248A0.
N65 X201.25Z11.9008A0.
N66 X201.625Z11.6511A0.
N67 X202.1875Z11.1025A0.
N68 X202.6094Z10.4317A0.
N69 X202.8496Z9.6728A0.
N70 X202.9141Z8.99A0.
N71 X202.9258Z6.9494A0.
N72 X205.Z6.8597A0.
N73 X205.375Z6.7096A0.
N74 X205.75Z6.4265A0.
N75 X205.9375Z6.2199A0.
N76 X206.125Z5.8955A0.
N77 X206.2305Z5.5802A0.
N78 X206.2773Z5.1622A0.
N79 X222.5Z3.293A0.
N80 Z3.2904A-4.3
N81 X206.2812Z5.1533A-4.3
N82 X206.2344Z5.5479A-4.3
N83 X206.0937Z5.9456A-4.3
N84 X205.8125Z6.343A-4.3
N85 X205.625Z6.5248A-4.3
N86 X205.25Z6.7469A-4.3
N87 X204.875Z6.8633A-4.3
N88 X204.5Z6.9017A-4.3
N89 X202.9297A-4.3
N90 X202.9062Z9.035A-4.3
N91 X202.8374Z9.7136A-4.3
N92 X202.6309Z10.3279A-4.3
N93 X202.2178Z11.0304A-4.3
N94 X201.8047Z11.459A-4.3
N95 X201.1162Z11.9463A-4.3
N96 X200.3245Z12.2323A-4.3
N97 X199.6016Z12.3301A-4.3
N98 X197.6562A-4.3
N99 X197.6328Z12.3711A-4.3
N100 X195.0664Z12.4237A-4.3
N101 X183.1382Z12.413A-4.3
N102 X182.4845Z12.3096A-4.3
N103 X182.0176Z12.0911A-4.3
N104 X181.8308Z11.9782A-4.3
N105 X181.2705Z11.4649A-4.3
N106 X180.897Z10.9666A-4.3
N107 X180.5Z10.1087A-4.3
N108 X175.5312Z10.1013A-4.3
N109 X175.25Z10.0685A-4.3
N110 X174.9687Z9.9749A-4.3
N111 X174.6875Z9.8087A-4.3
N112 X174.5Z9.6315A-4.3
N113 X174.3125Z9.3742A-4.3
N114 X174.1719Z9.0394A-4.3
N115 X174.125Z8.6462A-4.3
N116 X174.1016Z7.917A-4.3
N117 X-86.5Z21.5759A-4.3
N118 X-89.125Z21.817A-4.3
N119 X-89.3359A-4.3
N120 X-89.5Z21.8414A-4.3
N121 X-97.3867Z22.255A-4.3
N122 X-97.3984Z23.0297A-4.3
N123 X-97.5156Z24.0804A-4.3
N124 X-97.9375Z24.8631A-4.3
N125 X-98.5938Z25.3456A-4.3
N126 X-99.4375Z25.6067A-4.3
N127 X-100.8438Z25.7599A-4.3
N128 X-101.9314A-4.3
N129 X-101.9584Z25.7915A-4.3
N130 X-114.8132Z25.7978A-4.3
N131 X-114.996Z25.7655A-4.3
N132 X-115.0072Z25.0194A-4.3
N133 X-117.3203Z21.5309A-4.3
N134 X-118.6914Z22.6984A-4.3
N135 X-121.75Z24.0613A-4.3
N136 X-122.125Z24.1486A-4.3
N137 X-125.5Z24.4352A-4.3
N138 X-137.125Z24.423A-4.3
N139 X-140.6875Z23.44A-4.3
N140 X-143.9043Z21.2052A-4.3
N141 X-144.3086Z20.7608A-4.3
N142 X-145.1172Z19.7616A-4.3
N143 X-145.1406Z26.9071A-4.3
N144 X-145.2769Z27.3544A-4.3
N145 X-145.5493Z27.8773A-4.3
N146 X-145.958Z28.3413A-4.3
N147 X-146.3667Z28.636A-4.3
N148 X-146.9116Z28.8518A-4.3
N149 X-147.7971Z28.9588A-4.3
N150 X-149.0913A-4.3
N151 X-149.1083Z28.9867A-4.3
N152 X-159.8828Z28.9888A-4.3
N153 X-161.5Z29.1473A-4.3
N154 X-163.75Z29.2353A-4.3
N155 X-221.5Z30.2716A-4.3
N156 X-222.5Z30.2656A-4.3
N157 Z30.9669A-8.6
N158 X-216.5Z30.8934A-8.6
N159 X-164.Z29.9271A-8.6
N160 X-162.5Z29.8423A-8.6
N161 X-160.9297Z29.6589A-8.6
N162 X-160.1445Z29.4982A-8.6
N163 X-159.752Z29.3753A-8.6
N164 X-159.5557Z29.2865A-8.6
N165 X-159.3594Z29.1203A-8.6
N166 X-159.3359Z29.0463A-8.6
N167 X-148.9344A-8.6
N168 X-148.9136Z29.0186A-8.6
N169 X-147.4941Z29.005A-8.6
N170 X-147.1602Z28.9557A-8.6
N171 X-146.8262Z28.8695A-8.6
N172 X-146.3252Z28.6426A-8.6
N173 X-145.9077Z28.3271A-8.6
N174 X-145.4902Z27.7948A-8.6
N175 X-145.3232Z27.4936A-8.6
N176 X-145.1563Z26.9742A-8.6
N177 X-145.1328Z19.7728A-8.6
N178 X-144.0313Z21.1357A-8.6
N179 X-140.6563Z23.4971A-8.6
N180 X-137.0469Z24.4933A-8.6
N181 X-125.375Z24.4891A-8.6
N182 X-122.6328Z24.2558A-8.6
N183 X-122.6094Z24.2051A-8.6
N184 X-122.Z24.1969A-8.6
N185 X-118.6708Z22.7115A-8.6
N186 X-117.3359Z21.5571A-8.6
N187 X-115.0054Z25.0594A-8.6
N188 X-114.9944Z25.8055A-8.6
N189 X-114.7637Z25.8705A-8.6
N190 X-101.8906Z25.8556A-8.6
N191 X-101.8672Z25.8241A-8.6
N192 X-100.625Z25.817A-8.6
N193 X-99.9219Z25.7384A-8.6
N194 X-99.875Z25.708A-8.6
N195 X-99.5938Z25.6965A-8.6
N196 X-98.6563Z25.4097A-8.6
N197 X-98.Z24.9405A-8.6
N198 X-97.9063Z24.8422A-8.6
N199 X-97.5195Z24.1073A-8.6
N200 X-97.3965Z23.0042A-8.6
N201 X-97.3906Z22.316A-8.6
N202 X174.1094Z8.0869A-8.6
N203 X174.1328Z8.7809A-8.6
N204 X174.1747Z9.0632A-8.6
N205 X174.3005Z9.3734A-8.6
N206 X174.4683Z9.6201A-8.6
N207 X174.7198Z9.8509A-8.6
N208 X175.0553Z10.0344A-8.6
N209 X175.5585Z10.1724A-8.6
N210 X175.873Z10.176A-8.6
N211 X175.9254Z10.2066A-8.6
N212 X180.5312A-8.6
N213 X180.8638Z10.9172A-8.6
N214 X181.3274Z11.5603A-8.6
N215 X181.9456Z12.0853A-8.6
N216 X182.5637Z12.3728A-8.6
N217 X183.5682Z12.5272A-8.6
N218 X194.9277Z12.5236A-8.6
N219 X196.0703Z12.5001A-8.6
N220 X196.0937Z12.4343A-8.6
N221 X199.3611Z12.4202A-8.6
N222 X200.207Z12.3012A-8.6
N223 X200.8838Z12.0641A-8.6
N224 X201.1376Z11.952A-8.6
N225 X201.7297Z11.5522A-8.6
N226 X202.2373Z11.0159A-8.6
N227 X202.5757Z10.4607A-8.6
N228 X202.84Z9.7128A-8.6
N229 X202.9141Z8.9471A-8.6
N230 X202.9375Z6.9978A-8.6
N231 X204.3437Z6.9901A-8.6
N232 X204.625Z6.9518A-8.6
N233 X205.Z6.8642A-8.6
N234 X205.375Z6.7055A-8.6
N235 X205.6562Z6.5161A-8.6
N236 X205.9375Z6.2096A-8.6
N237 X206.125Z5.8829A-8.6
N238 X206.2305Z5.569A-8.6
N239 X206.2656Z5.2154A-8.6
N240 X222.5Z3.3512A-8.6

0

291

4142 wrote:

people, the problem. Created model, gave center, running an OK-code. Asked the grunt processing with 12 mm frezoy. When launch an machine, he I have not goes in model and churchgoers 29 mm higher on the surface. Can I center model wrong gave or the problem in another.?


Speak would better was would watch. There talks best will where mistake.

0

292

Help, the problem remains. Can to change zero-sum dimension point on the brink of zagatovki?
http://s4.uploads.ru/t/8BIxV.jpg

0

293

Caveat kind! Answer please why In the Window Scale not change size model? I ah very the amateur ChPUshnik.

0

294

carpenterz wrote:

caveat kind! Answer please why in-year window Scale not change size model? I ah very the amateur ChPUshnik.

Come to mean wrong commit. First vvidite in one thing field (1) their data and arrive at fold izmeninie size obekta (2). Beret (2) outcome and re-insert in other a.
Incidentally I decided to questions their which were higher. Hostel to know, perhaps whether give how many appatat should borrow mm but for one Passage? And where this?
http://s5.uploads.ru/t/ZnVGt.jpghttp://s4.uploads.ru/t/ynzjt.jpg

Last edited by 4142 (Jul 1 2013 14:09:31)

0

295

4142 wrote:

By the way I decided to questions their which were higher. Hostel to know, perhaps whether give how many appatat should borrow mm but for one Passage? And where this?
     

In fix was the problem?
Here is window where can be ask depth cycles of processing.
http://s4.uploads.ru/t/PilFJ.jpg

0

296

Igor44 wrote:

In fix was the problem?
Here is window where can be ask depth cycles of processing.

What zanachenie on questioning? That that Spain,?
The problem was precisely in the center of the model. I zero point gave on center (width, perform well). And apparatus You close program zero point precisely on the surface zagatovki, Of for this I have blowers khodily higher zagatovki on 30 mm. (Under thickness 60 mm but zagatovki)

0

297

4142 wrote:

what zanachenie on questioning? That that Spain,?

All meaning will depend the health of from your tasks.
This only you to decide. What blowers, what material, what speed and gives too costly

0

298

Thanks for Sharing (the answer, all made as have taught, but outcome there is no, and in field "chosen by the object" you is worth 1, and I have 0. And still why model pivoting only on Y. Podskajite please! At all something I furniture from array am, if whom that interestingly gladly answer. And ChPUshnik good bye from me no

0

299

carpenterz
On the idea of you have detail should not razvorachivatsya, you perhaps that function voice. For increasing obekta need to was start pressing hard on scale. Yes I have on z, y significance on 1, but I there pasted significance fold increase on's and all, on all kordinatam equitable increase.

0

300

Dobryi day. Podskajite, please, can who the knows. Why I have progressive Rock unsupportable to see indicate present? Until this she their not seen, but I with the mouse was tossing in window and model was being downloaded, and now and this the establishment, not is loaded. Not giving pereustanavlival app, increasingly not as (

0


You are here » Forum clan ChPUshnikov » Programs for CNC-frezerov. » VisualMill - developing mnogoosevuyu processing