Forum clan ChPUshnikov

User info

Welcome, Guest! Please login or register.


You are here » Forum clan ChPUshnikov » Programs for CNC-frezerov. » VisualMill - developing mnogoosevuyu processing


VisualMill - developing mnogoosevuyu processing

Posts 501 to 550 of 829

501

vladavj
Clearly something one takes not so. I have montaza visa Latvija norms – rather than rolling.
On 1 st. Topeka lesson. On him all molitvakh.
Try without suppress particles.
You even question not asked nor what. Than you help?
See only trajectory in mache the wrong. In Mile on Y blowers not moves or so have you intent is?
Have you permitted to Edgar Froese on Chishmins move? There where ask: Process from to 50 until 50 (across Chishmins install there) and from 0 • until 360 •
And used sham as passes?

0

502

darksega wrote:

vladavj
Clearly something one takes not so. I have montaza visa Latvija norms – rather than rolling.
On 1 st. Topeka lesson. On him all molitvakh.
Try without suppress particles.
You even question not asked nor what. Than you help?
See only trajectory in mache the wrong. In Mile on Y blowers not moves or so have you intent is?
Have you permitted to Edgar Froese on Chishmins move? There where ask: Process from to 50 until 50 (across Chishmins install there) and from 0 • until 360 •
And used sham as passes?

Shapes and such elements yes, have yielded is famously. But to example I need cut off from're blank increase a relic. Have been putting - '4th axis Title block wellness' in-year window trajectory is famously are displayed, used sham, too, norms. But when is generated code, unfortunately as in mache is displayed. Roughly the same problem and under '4th axis Title block hanger' when trajectory around the circle (not along axis). In-year window is displayed right What not in really is obtained as on skrine. T. E. All trajectory your quadriceps burn each other on distance 2.5 mm, but on code in sight that on Y goes a permanent shift as would on spiral (I singled in Red squaring - begins from 1,64mm and goes until 2,5mm). Why in hierarchy will be selected and in sham all the Hood and code generit with some bugs not understandable.

0

503

Detail 870kh150kh150. And paranoiac here is so http://se.uploads.ru/t/WtTz2.jpg
Are compared figures (

0

504

And what version of feel more comfortable rhinocam visualmill2009 or visualmill2012 for the beginner?

0

505

Who nor whether responds why work only 3 axis, not 4? visualmill6

Last edited by djolegoleg (Jul 15 2014 18:11:08)

0

506

djolegoleg
Telepaths in Holiday.
For work with 4 hinge need choose processing from tabs Create - > 4 Axis - >.

0

507

darksega wrote:

djolegoleg
Telepaths in Holiday.
For work with 4 hinge need choose processing from tabs Create - > 4 Axis - >.


Economy will understandable, but why work only Y A Z, where same podnutreniya as powermill or this implemented in rhinocam 2012 and visualmill 2012?

0

508

djolegoleg
All species processing are there, where pointed out.
For podnutrenney s'm using method reverberates on fixed a corner N times. 360/N = alpha.
And after every reverberates do the mill 3-D with special. Long, but other species processings in this program there is no. And for other CAD not found post for mach3.

0

509

Forumchane Podskajite here is such a thing

As do processing first one hand on a plane (with varnished) and then to detail turned 180 degrees and dark side
In what regime cutting such option came there and as create such code with turn on 180

To example = model Medalki terrain with one and the other sides

0

510

mesarubka
Messages higher esteem. On this and previous page. All will become clear.
Vkratse: The deployment templates, choice tool and post processor, as in lesson have topikstartera.
Kind of processing:
Create > 3 axis Title block > Horizontal hanger (3d company) and / or parallel finishing (last but)
One reversed treated a human, further coup: 4 axis Title block > voice table ('re putting on what a corner reverse) for bilateral respectively 180 •
And again 3d Cutting of the.
With turn there is one on the door frame! Under turn tool enters in point 0,0,0 camping on E. If have you center on axis reverberates, and so and will, then detail zaporetsya. Need either in really manually occasionally-one can touch tool by reversing coordinate Z
Either as I do: Running an code for each processing separately, and in mache I'm turning it stocking manually, not creating code reverberates. T. E. Not running an code voice table, and simply code for one hand and Phase 2 of code for other hand, and I'm turning it manually.

0

511

darksega wrote:

Since turn there is one on the door frame! Under turn tool enters in point 0,0,0 camping on E. If have you center on axis reverberates, and so and will, then detail zaporetsya.

Not know on expense VisualMill, and in RinoKame on button Machine setup there is configuring Tool convened Pt. Before coup rotating blade exits in Rw a. Respectively a whole and blowers and the beginnings of.

0

512

That the impenetrable is happening srinokam SYROY some kind on with alignment vizuala

0

513

Have someone was such the problem. In Visualmill generiruyu trajectory 4kh- for example finish word processing along axis. In really like no joints. But harvesting work thus that along details passes there's a step. T. E. Begins process and with every step reverberates axis A blowers a bit is rising. The problem not in mechanics, not in temperature air and the problem equally povtoryaemaya. High ledge virtually not depends on diameter the details and number of steps. Suspicions on software part of. In mache already has tried toying with were CV. Nor what not helps. Already not know that to do ((Figure gives more a clear understanding of problems.
http://sf.uploads.ru/H3ONm.jpg

Last edited by vladavj (Jul 19 2014 01:27:47)

0

514

Forumchane Podskajite here is such a thing http://sf.uploads.ru/hQdku.png
Or here only remains cut with coup?

0

515

This part of is obtained below center axis, so only coup or PowerMill

0

516

All Hi!
Owner Alexej Fimushin khelp! At the work you with a blinker on operations "4th axis Title block parralel finishing" any hell is that happening. Launch an program in mach3. If under the finish processing blowers makes Passage on Chishmins on direction from patron by the end of're blank, then then, to orient on patronage, degree, your blinker makes a host turnover in contrary direction, which very retards process. For example, to orient with 0 degrees on + 1 degree, he makes turnover not on degree, and goes to this "plus costs" through low temperature can do. And when rotating blade travels in direction to longer, then there your blinker not makes such a course, and normal tide is turning in layer disc to specified F on on kratchayshey trajectory. Under creating UE, in visualization rotating blade handles exactly and clearly on specified circle and without curiously, much more with new lawyers of. Code tested, no an extra $gather steam; in contrary direction there.

upd. Do, incidentally,... Oscar-from first lessons. All on scheme.

upd. Observed, that before the latest absent, your blinker, having received already more than six thousands of degrees on DRO, began throwing out the line all these nakruchennye for the whole process big traction back in side zero. Minutes fifteen an extra $took on this deeds.

Last edited by JHNBLZ (Jul 21 2014 14:37:37)

0

517

Enibadi?

0

518

JHNBLZ wrote:

enibadi?

It seems forum a dead

0

519

vladavj
Yes ca on otpuskam all))

0

520

If pro PowerMill the she on Russian and Descproto - there is no

0

521

JHNBLZ wrote:

Anyone reflecting Hi!
Code tested, no an extra $gather steam; in contrary direction there.

Edited JHNBLZ (21-07-2014 13 :37: 37)


This not the problem VisualMill, and preset Mach3. Smoke the manual.

fort wrote:

No whether russifikatora this programs?


Which? VisualMill?
So old version of there is no and can scarcely will.

If would translate, then will 2014 version of.

0

522

Cultural.
In vizualMill 2014 there is post Mach3 mm.?
PCA.

0

523

skedram wrote:

Of list of Current post Processor selecting Mach3-MM
If need set up post the nazhymaem Edit
Will have discovered window Post Processor Generator

I made one thing climate just in the tab Multi Axis Motion
In field nonrotating Axis Code - B axis Title block busiest A. Then in Jeul Pan under scale program code for turning axis writes A - if from whom any in Mace, Croatia for povorotki is worth another he or the in these fields enter corresponding significance.


Bountiful all days. Podskajite as preserve dreaded A. I have not as not is obtained.

Last edited by Garik123 (Aug 16 2014 09:20:06)

0

524

Garik123
On & mops (there where Machine - 4 axis Title block, Post - Mach3-MM, Stock -) double click on Post
Will have discovered window Set Post - Processor-Optoins
The most the first line - Mach3-MM - near Edit - click on it. Will have discovered window with pile tabs.
Selecting tab Multi Axis Motion
In the most the upper graph nonrotating Axis Code - > A Axis - let's enter achieve escape dreaded. In the most the lower graph will emerge climate with the both the, that introduced.
Will their strategic stuffing succeed Save and all changes persists. Forth Close

0

525

darksega wrote:

Garik123
On & mops (there where Machine - 4 axis Title block, Post - Mach3-MM, Stock -) double click on Post
Will have discovered window Set Post - Processor-Optoins
The most the first line - Mach3-MM - near Edit - will their strategic stuffing succeed on it. Will have discovered window with pile tabs.
Selecting tab Multi Axis Motion
In the most the upper graph nonrotating Axis Code - > A Axis - let's enter achieve escape dreaded. In the most the lower graph will emerge climate with the both the, that introduced.
Click Save and all changes persists. Forth Close

Increasingly so and do, only In field nonrotating Axis Code - B axis Title block busiest A as written on the first page on Figure, but is obtained here is this.
http://sd.uploads.ru/awFkj.jpg

Last edited by Garik123 (Aug 16 2014 23:29:51)

0

526

Garik123
Let all with starters!
For what you Gorski Hotel reception another dreaded?
Have you more 4 axles on a lathe? What he or in mache on povorotke (4 axis) is worth?
Not has tried translate name mistakes? Have you rights administrator in products there is? Try vizualmill put on disk on which not worth vinda. For example on "D"
And all same to know the Game why you to change dreaded povorotki.

0

527

darksega wrote:

Garik123
Let all with starters!
For what you Gorski Hotel reception another dreaded?
Have you more 4 axles on 45kW? What he or in mache on povorotke (4 axis) is worth?
Not has tried translate name mistakes? Have you rights administrator in products there is? Try vizualmill put on disk on which not worth vinda. For example on "D"
And all same to know the Game why you to change dreaded povorotki.

I put 4-defective axis A contaminated drafting the ing lu in place hew A (povorotki) touted W. Account for to change In on A. Rights administrator in products there is. Stuck establish on disk D. And even under processing difficult files of a visual learner visnit. So have all?

0

528

After sustained struggle with vizulmilom concluded that this is quite kalichnaya progressive Rock, with curve blunder. For beliefs in this enough put primitive task - process say cylinder in indeknom regime with 4-'s sides, for example feed frezoy. And watch on this pornography, even in sham. I already I'll shut up pro more complex tasks.

0

529

You several not are right. Download democracy with official site and play a bit around with it.

Have Mecsoft as something otherwise implemented protection. The jeopardized program is leading themselves strange :-D
As there pro a mirror was?

0

530

Podskajite please. Here is, say, have the same Oskar, that in the early themes from warbonnet and legs in motives the form of must hanging around emerging parts of, which his interpolate with industrius. As they incisions these emerging parts of. I put whet one gizmo sferichesko conical frezoy. She processed quarter-the details and then simply has closed its from templates. And conical frezoy one takes - from heads too big on diameter want it now sticks out.

0

531

baton wrote:

Say, is please. Here is, say, have the same Oskar, that in the early themes from warbonnet and legs in motives the form of must hanging around emerging parts of, which his interpolate with industrius. As they incisions these emerging parts of. I put whet one gizmo sferichesko conical frezoy. She processed quarter-the details and then simply has closed its from templates. And conical frezoy one takes - from heads too big on diameter want it now sticks out.

http://se.uploads.ru/2JaNC.jpg
Manage your significance below which not process. And even better - native APC geometry in its feet and head in any 3D package (max, on May, so predskazuimee.

0

532

Could you tell me pliz, as fight with similar in the doobie miscalculation? , too, most will and on real atack.
Word processing feed frezoy 15 degrees 0.2 guidance ranges
http://se.uploads.ru/t/X1TGQ.jpg

0

533

All Hi! Guys please can you tell me, working in Visualcam, under sham details 4axis (Prepares processing) we see, that in mid-model this measure is generated cube, from-for what this may be? http://sd.uploads.ru/t/yUATu.jpg

0

534

as you
Other message pre-independence previous until yours from vladavj. There as times marketed at knock-down the depth of cut, camping on E. Below rotating blade tumble down not will. Perhaps have you as times is worth significance long this "pipes"

0

535

Dobryi day. Thing VisualMill. Sharpened couple of models, very slowly. Podskajite perhaps to model constantly was twirling in one side without stop, and command was constant (such a as under narezanii a groove). If in this program impossible do this, in what program, could you tell me?

0

536

Garik123 wrote:

Dobryi day. Thing VisualMill. Sharpened couple of models, very slowly. Podskajite perhaps to model constantly was twirling in one side without stop, and command was constant (such a as under narezanii a groove). If in this program impossible do this, in what program, Podskajite?

There is no such in vizualmill, advise you to move on Powermill, there there is such and many still another interesting things there is. Not finding decisions problems in 558 fasting threw away I anyways the Visualmill and for couple of days mastered Powermill (those tasks which me interested). Exasperated as elephant.

0

537

To to develop Powermill and month little will, examine lessons on VisualMill there there is all necessary

0

538

Yes indeed this functions in vizuale not found, d study power daydreaming.

0

539

Kvarz12 wrote:

To to develop Powermill and month little will, examine lessons on VisualMill there there is all necessary

You badly mistaken. Not need there month. If know any SAM app, then to move on another not will total labor. I he launched with solidkama, then moved on vizualmill, quickly all grabbed. Ah and to enter in the PM, I looked one lesson pro balyasinu. All, too, most in principle. Of course in nuances and the twists and turns in the process earliest will have engage. As and everywhere.

0

540

skedram wrote:

Chipsets This mistake, it's pounding when WordPad not pulling. At all this progressive Rock quite a fractious relative to resources computer.

Find welcome this weekend’To anyone! Deal in is that I, downloaded of a visual learner, worked he on average computer, okay, with 7vindoy but worked. Periodically good thing such windows with mistakes, on days took s as good WordPad, i7 four core, 8 flows precent. 16 that RAM, vidyukha -Ouelette, 7 vinda and the problem has remained such a same. Think not in from bare metal the problem. Yes personally I have end of the just this problem arises at the work you instrument discharge hopper. With spoken native instrument like works not poorly.

0

541

vlos wrote:

Greetings To anyone! Deal in is that I, downloaded of a visual learner, worked he on average computer, okay, with 7vindoy but worked. Periodically good thing such windows with mistakes, on days took s as good WordPad, i7 four core, 8 flows precent. 16 that RAM, vidyukha -Ouelette, 7 vinda and the problem has remained such a same. Think not in from bare metal the problem. Yes personally I have end of the just this problem arises under work instrument discharge hopper. With spoken native instrument like works not poorly

In case with data whose computer not so is important. Xi, that this glitches kryaknutoy version of.

0

542

stiks wrote:

In case with data whose computer not so is important. Xi, that this glitches kryaknutoy version of.

Yes agree, likely so and there is, several laptops, huh good tried them.

0

543

Guys, can I closing, but immediately sorry. That better Reno or Power? As package for simulations and processing?

0

544

billsmith wrote:

Skyfall came me difficult advise, long them enjoyed. But the crux of the is simple. Stepper engine makes one turnover (360grd) for 200 impulses, times 0.18 on the rate your gearbox (for example 50), forth times 0.18 on subgroups driver SD (mikroshag for example 8), get number of impulses on turnover (200 • 50 • 8 =8 0000), on one degree is obtained (80,000 / 360 =2 22,2223 step). Or on one step (1 / 222,2223 =0, 0045gradusa). And with laggards VisualMill I was sent easier, siding with on PowerMill, he on Russian and opportunities far more.

Read with the first pages, lesson from skedram have with first times, forth patience and included the brain. And find 4-'s the axial postprotsessor for PowerMill lacks patience

0

545

vall0808 wrote:

Reading with the first pages, lesson from skedram have with first times, forth patience and included the brain. And find 4-'s the axial postprotsessor for PowerMill lacks patience

Should have to patience on the search 4-'s office for PM. Dont people on forums. Yes and there is regulation in caricature as from standard fanukovskogo easily remaking in fully-fledged 4-'s axial for Maca. Truth there for old PM pictures of the, but deal can be. Simply need to sit down, ask the goal and deal. And vizualmill he from birth curve, little moreover that crashes so and believes records. And stories pro glyuchnost from-for quacks will mean - is nonsense, easily test, using trial version of, in which came up all those same glitches. The same skedram already took me on the PM, saw his posts, discussed the PM. Need to try all and move forward.

0

546

Dabble with studying the Rotate modifier Table kind ('m torturing long-suffering Oskar). Tool convened Position fielded X 0, Y0, Pizza mm. On visualization Horizontal Routing in late processing move tool on this levels not visible. Fear that with further turn templates under using framework (under processing wax, too, for example) tool he meets with makes frame. That I do not so?
http://images.vfl.ru/ii/1413728965/13c65647/6690443_m.jpg

0

547

АЛМАОС wrote:

What I do not so?

Increasingly correctly. On the most strategy this trajectory not in sight. Is actually added on crossings between positions. And at all, better do brief processing, pitch in unmarried and traced all movement and all twists axis.

+1

548

stiks wrote:

There correctly. On the most strategy this trajectory not in sight. Is actually added on crossings between positions. And at all, better do brief processing, pitch in unmarried and traced all movement and all twists axis.

"Brief", in sense with vertical-step, with one layer by layer processing, ah and camping on P., for austerity time?

0

549

АЛМАОС wrote:

"Crew cut", in sense with vertical-step, with one layer by layer processing, ah and camping on P., for austerity time?

Precisely. Ah or draw it it simple detail, to word processing with each hand on minute went. And then already launch on air and observe their mistakes :) Next already try with industrius.

+1

550

On fifth bottom studying Reno-Kama to with their surprise found proggie analyzer G-breaking in makes proge. Until found that in offense can be to rule G-code: Seek opredyolyonnoe significance, substitute for his on another, ah and camping on P. Are interested in is rising whether on preset levels on Z tool before a turn on 180 degrees without labor has found a string this in G-really. So same can be visualize processing on the lines in the code (As, truth, not fully understood as). Who-thread can in more details to tell about this fenke?
P. S. Famous Oscar in medallion analyzer:
http://images.vfl.ru/ii/1414072502/879cb0c2/6728325_m.jpg

0


You are here » Forum clan ChPUshnikov » Programs for CNC-frezerov. » VisualMill - developing mnogoosevuyu processing