Forum clan ChPUshnikov

User info

Welcome, Guest! Please login or register.


You are here » Forum clan ChPUshnikov » Looms with CNC » From whom what machine?


From whom what machine?

Posts 101 to 150 of 580

101

And on chastotniku what can be put to not been running experiments.

0

102

Ingener I have a question real quick to you
On this 45kW not envisaged any curtain for protection from dust shvp and that direct?

0

103

Can I and not rights, but on such a 45kW stal45. As something not very. Ah, okay klishukhi magnesium. And stal45? Fix? Old relic dropped dead he in, liest starashnykh. On the table with "the sacrificial layer by layer" plastic, from al. Profile? Can not understand what? But I so thought, that this for other goals machine. And even all in one voice say, that have ekzitecha the quality of strongly fell in the last time :x.

0

104

gigs wrote:

on this 45kW not envisaged any curtain for protection from dust shvp and that direct?

There is no on this not envisaged, but feel more comfortable get before them, - I here is after work pass that direct and Motorhead429 / sandbox Silicon greasing and cloth wipe down, and so times three, - outcome -’will wash from Motorhead429 / sandbox entire can kick out.

СерёгаЧПУшник wrote:

and stal45? Fix?

Yes I'm just trying a I, - for constant work of course umret- placed A on depth 0.5 mm. Nagraviroval-tried means!
More
Not'll-- pity machine

sergeiilin wrote:

air oshlazhdeniya not is waiting nor how many only again the guy squeaked as Sassanid seller the date you indicated. And what is worth chastotnik I have Delta on 3 phase. Want remaking on 220 volts.

I have on 220, and put can be until 2 kW Italy HSD the

And even all in one voice say, that have ekzitecha the quality of strongly fell in the last time :x.

C quality all normal, still hold-mark

Last edited by Ingener (Dec 28 2010 09:42:11)

0

105

Hello, I can’t stand on Court my samostroy, field 650's 900, labor zone 600 on 460, until a Type 40 TARDlS the speed processing holds 1,500 mm / mines and the first work

Zoom

Zoom

Zoom

0

106

Посетитель wrote:

the clenched - here is they us really annoy! After six months work (steel, too,), noticed lyufty, began to adjustment. In general speaking 0.04mm taking or, he grips. Perhaps only have us - debate not d and plokhovo, too,, not d to speak. Us not red line of being able, camping on ?. - safety border 0.1mm, and have us taking.

Stanochek something for the tree of. For good reason you his on have become.
And about problems - homilies questioning instead specialty bronzes. In liner precision bearings. Under meaningful loads to change will have more often. But here choose - either productivity (short-run), either kakchestvo. Not forget under this about estimated value of and the possible just.

0

107

TarantuL - Spasiba, I not question ask the.
Read, above than write.

Stanochek something for the tree of. - you on the picture have identified? Three years I gnawed on only steel, brass, alyum, magnesium.
For good reason you his on have become. - not advise (– my opinion).
And about problems - we have no problems, Working I on this 45kW
Homilies questioning instead specialty bronzes. In liner precision - you at all realize about fix speech? They regulated!
But here choose - either productivity - initially, profits he brings and the well.
Not forget under this - there is no this press more.

PS: If there is than the enlighten on this the barre. :)

0

108

Woodpecker MEII-4242S
http://s016.radikal.ru/i335/1012/1c/c49bc8ea904d.jpg

Last edited by Посетитель (Jan 11 2011 14:24:09)

0

109

Visitor
Something reaction any. Reeks I might that whether?
Why?
And at all something this firms looms - new on market Russia as least. Or re-branding some..
.. Three years I gnawed on only steel, brass, alyum, magnesium.. Could not he this to do. Despite Your pictures do conclusion about how, that you my machine be photographed by.
Hmm. Even color holding mailbox such same. ^ ^

-1

110

Visitor
Ha! Looked closely on pictures. On signature the bottom. Ah, the kind, in which you advocating for its.
I same this stanochek something you and ’.
Remember "efforts" with in cash in early December?

So whom now strain can be with with disinformation? And?
This where this you have taught so clients "chasing bullshit" sculpt?
Chase be rude to, I much detail will talk on this Forum about there are some circumstances that have accompanied our a deal.
Hmm. :confused:

-1

111

TarantuL wrote:

Ha! Looked closely on pictures. On signature the bottom. Ah, the kind, in which you advocating for its.
I same this stanochek something you and ’.
Remember "efforts" with in cash in early December?

DAC deal in 45kW or in badly?
Or I you be rude 1,000 times or now being rude?
Bad machine? Not works? Or you not appreciate that I you in-business hours time advised on the barre?

About have become - yes I indeed has tried steel but not on your a lathe (I have their was 4 pieces)
About cliche, - do, - but only for their (for themselves)

And tell the you in general the and nothing to acquire (not potato prints chasing bullshit!

Last edited by Ingener (Dec 29 2010 09:23:43)

0

112

Ingener! Get used to. This your used and you his carrying. Strange, why wielders Lada so actively not pack blood AvtoVazu? :rofl:
TarantuL. Want for decent machine - prep are decent guap :glasses:. Want technical support? Send his practitioner on training. Or What money to the propeller heads with hand. On Different not case :no:. If, in force circumstances, bought initially inherently unsustainable machine :x - caveat are prepared to what he will work only thanks to trudolyubivosti your mechanics. To speak pro a guarantee with sellers Chinese looms - utopia, in eight cases from ten. Another matter: Enshrined you this in price or not (outcome one and the same, but if enshrined, then he you more expensive costing). In the other the Frost talked, that invite on launch 3rd party a nobbler - costly (500-700uyo). And under sale, its ("commissioning"), already in price for 1,000 are pawning. I for themselves machine bought these at all with Chinese guarantee of. This means, that with creating fault, I'll call a nobbler, he will make diagnostics, will find reason fault and I, already himself, write letter representative in trades abroad :writing:. If the reason of a breakdown not own's good stupid or even something in this kind, then the Chinese in during 2 weeks parts change, without problems (ironically, the Chinese name of more expensive, than our prodavanam). Thus, I not'm feeding service service seller of in Russia (and this, believe me, sum, that many sellers in price bombards). And under fault order action the same, only all of this on large circle passes, through servisnikov, managers and any something logistics specialists, and detail (in case big luck), you arrive at through 1.5-2mesyatsa (and modicum zazvonites you them). This life. I this not with ceiling I take, I in quite major furniture firm’ve worked and all of these as times and am ('m kicking servisnikov, knocking spare parts, mother engineers technical support and terrible use swear with managers) :smoke:.

Last edited by СерёгаЧПУшник (Dec 29 2010 10:10:03)

0

113

Brothers, and no one will share your drawings on homemade machine?

Last edited by MONY (Jan 11 2011 01:59:13)

0

114

Посетитель wrote:

Woodpecker MEII-4242
http://s016.radikal.ru/i335/1012/1c/c49bc8ea904d.jpg

You some question on this machine? I have ploughs such-as, only on ductile-engines, if there is any questions, don, than can - and help.

0

115

Hidden text:

To view hidden text please login or register.


I have issues there is no, theme - Wu whom what machine?
Here is and picture scotch-taped, he on ductile and is faring, shoals racks there is,
But if inrestno, write it in lichku. Subject open not as relevant (the so think).

PS:
TarantuL! Above than on questions respond or write. Are looking whom write and etc.

Hidden text:

To view hidden text please login or register.

Here not debate. Will repeat for you - I gnawed on!

Last edited by Посетитель (Jan 11 2011 03:09:10)

0

116

Посетитель wrote:

he on ductile and is faring

On ductile is faring Woodpecker MeiI-4242S, and Woodpecker MeiI-4242 on shagovikakh.

0

117

vladin wrote:

. And here is on groundbreaking linear technology sumneniya glozhat. He in general should be on water (and even holes on part deal there is -but have been jammed). Otherwise -kuda gone away ribs of the cooling. Churchgoers mulka, that this a bit stronger spindle, but included with tokoogranicheniem on 1.5 kW.

As to owner unchallenged office only ask that: Where're you from, the intel dreadfuls? Being owner such a press, is thus question.
There is a beam and the beam output holes. They have been jammed.
Question - why? Petroleum bask - understandable! Can spindle restricted?
Where 4-1-1 pro limiting on current?
Tomorrow touch d spindle still times.

P.S. Yes, spindle like not was heated until. But on shagovykh we lunch heat up. :rofl:

0

118

’ ve worked on Multicam 1,000.

0

119

2003134 wrote:

Dear forumchane, advise as me better to purchase machine, moshnyy not need to, labor the surface where the 600 & # 215 ;9 00x100, spindle (woodworking tool) 1,5kVat, nutrition, 220V, table. Already with legs has strayed
D appreciate it

Order directly on factory &, 100% cheaper, 50% more qualitative :) here write not d on what factory bought these himself (and the will regard for advertising not obereshsya then :)), write Hydrographical Offices:
700-1,000-185, 1.5Kv. Tbilisi oboschelsya with transshipment until threshold 194 100,000 rubles. Behaved 4 weeks.

0

120

Our machine own production. He's sawin 'dyural, is building looms itself such.

Zoom

Last edited by trace (Feb 18 2011 03:12:07)

0

121

Here is my machine thing's homemade. The size of the field 2100Kh1050kh180mm. In as a spindles Chinese 2kh kilovatnyy manual frezer. On drives shagoviki 34kg / centimeters, on X, Wu trosovaya transfer of, on Z the screw. The speed on axis X-15 flushed per minute, on Wu-6 flushed per minute, on Z-1.3m / shadowing and chasing From-for ropes in suffers the accuracy of, although until tolerable. Establish slats on such a length of a until for me costly.

Zoom

Zoom

0

122

grin-mpx wrote:

Of-for ropes in suffers the accuracy of, although until tolerable

The cable reaching or taking in shesternyakh? The past? At all seems the cable works as the rubber band.

0

123

’ ve worked on Progekt-400 MasterWood (Italy) worked. Field 5,000 • 1,300 Full beaten. Vacuum the table on vacuum teapot 2 retailer on 12 mills every,
Engine 14kV, refrigerator separate (working on the principle of ?aaeaoi?a in auto)
From cons: Too many electronics, sensors, kontsevikov, voting hiccup time from time,
Quite expensive original the striker plate and smazyvayuschie materials.
PS: If from whom such same or a similar woodworking center with workers learning system Masterwork and MW-310, let us exchange experience work (write on e-mail)

Zoom

Last edited by mariman (Mar 23 2011 22:21:03)

0

124

I tone question, THAT is what-AS line embrace ME NOT is understandable! Where HERE Flud? :mad:

valb wrote:

the cable reaching or taking in shesternyakh? The past? At all seems the cable works as the rubber band.

Not Flud:
The cable works as spring + magnetic hysteresis on shagovike. If-would was although-would chervyachnaya transfer of the hysteresis can be was-would to exclude, and so on Stanke pulleys and indented belt.

0

125

andrei 1978 wrote:

Everyone details sdelani from have become simply pokrasheni serebristim. The cable natyaguetsya bolt no of springs netudelal such machine reach for the already year proshola he escho never return not drive the money changers cable can times in month makes podyazhku boltomi works on it for all day

Talk done. Not thought that on trosikakh. That the a good can be to do under big extreme the table.
And high-speed characteristics press not write?

0

126

Incidentally, from upgrades have been:
As something instead representative eighty six police frame for ultra termorezki foam plastic. The size of the templates 2000kh1000kh160. In thermoplastic or there is their cons, big demands to quality of and composition foam plastic. Now think over mechanical withering revolving obrazivnoy of string.
Later put up some angle irons onto the grindstone, then and Drill with shlifovalnym loop. (The so as caregiver equipment not there is).
Still was knot for fire on nikhrome. For implementation polutonovogo fire't seek the intel to assemble a gas burners with size of spills until double
In further plan to meet own curiosity establish on machine mini-extruder and to 400 technology’Italie come out at-RAP, good machine is worth on territory dry. Enterprises.

Here is video grind down.
http://www.youtube.com/watch?v=oig0YXBLM4M

Zoom

Last edited by grin-mpx (Feb 24 2011 17:10:15)

0

127

grin-mpx wrote:

Of-for ropes in suffers the accuracy of, although until tolerable

Soon'll post an photo his next press so here is there I have drive solutions dentate seatbelts will stand. Until this these the most seatbelts over tests I have on 45kW for bolyasin 80 units D100 on 800 and not one failure not was. So that recommend instead ropes in (from which I refused incidentally from-for accuracy)

0

128

Bountiful time days! I here shiny new and not quite stanochnik (I goldsmith), but’ve worked on 5 fringes axle milling-gravirovalnom Stanke! Here is his photo:
http://s016.radikal.ru/i337/1102/83/629b8721c972.jpg

Last edited by Пимен (Feb 25 2011 11:44:51)

0

129

That the I fifth axis not watch in focus? And if on photo you cutting voskovku I would have advised do Pallet far would is drizzled cat from material, yes and SOZh not prevented, and Edgar Froese easier and the quality of cut cleaner. :tomato:

0

130

kartinka

What the I fifth axis not watch in focus

And how you its wanted watch? This same photograph! 5-I axis tide is turning in spindle! If will desire to can ssylu on producer. Rolls. There, to why, video precisely my press!

and if on photo you cutting voskovku I would have advised do Pallet far would is drizzled cat from material

Pallet has tried - awkward! And a wax steel wool no dangers not represents. Features that the vacuum cleaner those shavings, to collect!

yes and SOZh not prevented, and Edgar Froese easier and the quality of cut cleaner

Spindle 1.5 kW, so resistance on wax almost zero, and burden on mill no! And purity rotated and so many run and without SOZh, here rather sharpness such affects purity!

0

131

Пимен wrote:

spindle (woodworking tool) 1.5 kW, so resistance on wax almost zero, and burden on mill no! And purity rotated and so many run and without SOZh, here rather sharpness such affects purity!

Yes for wax capacity 1.5 kW on my view is redundant excessively, people tree process such shpindelyami, wax what are using Ferris or the other? Such what are using? I serve mainly shurupom from khanity 10 degrees the heel 0.1. I serve with SOZh because traction give mostly whether its 30 thousands of, but all perfectly unfortunately, simply himself spindle allows quietly until 50,000 gather steam;.

0

132

kartinka
Spindle basis for negotiation all cases life)
Wax use Ferris or Matt.
Such being rolandovskie also we 10 degrees and the heel 0.1
Traction are posing 15-20 thousand, if more, then under speed spin the wax plazmy.
And on what shareholders worked at determined whether you?

0

133

teplov wrote:

He advised – upper the surface of motors and on termopastu plant a powerful termootvod with kullerom from computer processor

Can taliban. And loss of commodity species, but himself sense has life. Radiator put lot more to was without fan and with zip ties prityannut to introduced engine through teploprovodnuyu pasta. Importantly to not gettin 'in the way work. Resource engine will rise.

0

134

And I have on old work was artmaster
And now bought its city by InStankoServis ATS 2112

Zoom

0

135

Пимен wrote:

kartinka
Spindle basis for negotiation all cases life)
Wax use Ferris or Matt.
Such being rolandovskie also we 10 degrees and the heel 0.1
Traction are posing 15-20 thousand, if more, then under speed spin wax plazmy.
And on what shareholders worked at determined whether you?

I have two press, one
COMAGRAV MT-Profi - the second CNC-Magic on 4 axis and plus spindle, too, mono reverse until 90 degrees, photo looms in topic jewelry that created, but mostly here forumchane on tree and MDF work, so that let better jump in, suddenly there and other goldsmiths pіdtyagnutsya. If anything here I on Artkamu yes and on other strengthening of much owe for themselves. :flag:

0

136

This those which bring me profits :1) machining center (from benefit to relatively inexpensive from cons a little old reception desk SINUMERIK
) 2.3 | Elektroerozionnye wire-vyloh and automated piercing ones looms (to Bayes can be attributed the traditional the Japanese the quality of and reliability to cons expensive in care)











9

Zoom

Zoom

Zoom

Zoom

Zoom

0

137

Пимен wrote:

outskirts time days! I here shiny new and not quite stanochnik (I goldsmith), but’ve worked on 5 fringes axle milling-gravirovalnom 45kW!

Need a consultation on what you want machine. Text pl. Its mobile me in lichku.

0

138

Our a new machine

1. Rama press from ekstrudirovannogo common industrial an aluminium profile.
2. On axis X are used of high rectangular that direct and linear bearings firms HIWIN 20 mm.
3. On axes Y and Z are used of high rectangular that direct and linear bearings firms HIWIN 15 mm.
4. On all three axle press set petroleum engines.
5. All transfer of press on axes X, Y, Z met on shariko-screw couples Motion-picture film in diameter.
6. Worker the table press made from plates of MDF 41 mm with mortgages nuts under screws M6 for fastening templates.

Labor area X, Y, Z 650's 500's 120 mm
The size of the the table absolute's 650
Overall size 1000kh800kh700mm
The accuracy of positioning get help mm
The accuracy of processing 0.05 mm
The speed displacement, max until 5,000 mm per minute
Labor the speed, max until 4500 mm / mines

Kollektornyy an electric spindle air cooling KRESS 1050FME.
In goes Collet an 8mm 1050 W / 220V, smooth adjustment of the gather steam; 8,000-30,000 about / shadowing and chasing Seamless ione with constraint starting shock.
Electronic bloc Since opportunity governance 4 the axes press. Built-in in staninu press
Nutrition press 220V / 50Hz
Weight press without podstolya 110 kg

Zoom

0

139

Home a new machine

Usually the tracks and the screw hide from dust. Ah and purely on design, like talk.

0

140

Suction shavings always, dust public normally.

0

141

trace wrote:

is press without podstolya 110 kg

Judging by photo, and kharaktiristikam on 110kg not pulling!

0

142

trace wrote:

Home a new machine

Whose he, no producer?

0

143

teplov wrote:

– the top of motors and on termopastu plant a powerful termootvod with kullerom from computer processor. Be can hungry fan and fact detail (wires, nutrition,), and termootvod, on-my, worth attention idea. Anyone ozadachivalsya makes problem?

Idea deserves ticket tours in life. Think over these, here is only far better "example" termootvod - to tortsu shagovika or with sides. On senses here, 1,85 like as hotter. But sometime, that payout ratios thermal conductivity materials of which is made stepper play not last role, if to talk about for tactile attainment of.
Want acronym cooling, but be a big hassle this. And if condensate? Far his divert? Issues (as and decisions) many.

0

144

gigs wrote:

judging by photo, and kharaktiristikam on 110kg not pulling!

Sense conjuring up? The entire elktrika within, the table top 40 mm, too, weight, the tracks, Motorhead429 / sandbox, dyuralya lack.

zima wrote:

whose he, no producer?

Our production. Do under Made to Order.

0

145

StarPOM
You my aid need a? I not understood

0

146

trace
Where and on than bought? Thank you

0

147

trace

And can be to know with whatever were machine on picture he's sawin 'dyural: In particular dozen such, command, bifidobacteria for Passage, traction spindles and as have cooled their heels.

0

148

АЛЕКСЕЙ wrote:

where and on than bought? Thank you

Machine of our production. The fabrication to request.

skedram wrote:

A can be to know with whatever were machine on picture he's sawin 'dyural: In particular dozen such, command, bifidobacteria for Passage, traction spindles and as have cooled their heels.

Traction 20,000-25,000, such 4, 6, 8.
Command from 1,500 until 2,500 mm / shadowing and chasing For Passage from 0.2 until 0.4 mm

0

149

I have court SD1325 Mr. Matej Srsen perfectly already 4 year without repairs roughly 8 hours in clock. Mostly krivolineynaya slicing composite, acrylic,, alyuminivye a news forms to assemble a from fillets. One problem I can't align to a remote control read USB, account for each time otsoidenyat the remote.

0

150

trace wrote:

Home machine own production. He's sawin 'dyural,

I, too, Mr SMlTH: Processing attaching metals interested in what frezoy (companies in view fusion) and what the depth of on Z for Passage.

Last edited by illj (Mar 24 2011 00:14:18)

0


You are here » Forum clan ChPUshnikov » Looms with CNC » From whom what machine?