Forum clan ChPUshnikov

User info

Welcome, Guest! Please login or register.


You are here » Forum clan ChPUshnikov » Tool » Such with itself shavings down


Such with itself shavings down

Posts 1 to 16 of 16

1

Questions to those, who overcame Prorizna Street carving and uses such with itself shavings down.
There is whether the difference and in than she under work such odnozakhodnoy and dvukhzakhodnoy cutters,?
What regimes on practice optimal?
Himself such such not used, but perhaps will have try.

0

2

I Prorizna Street do some carving not am, but'll spit it out. Usually adopted remove those shavings, upward. If steel wool will erased down, then word processing necessarily must be ‘ through, otherwise blowers car breaks down. If word processing ‘ through and steel wool will erased down, then and remove its from under details easier. If remove those shavings, upward, then part of shavings will be on her way back in zone cutting and hinder processing

0

3

Under Prorizna Street groove cutters, with itself shavings down is missing pile is. Familiar this assertion already were checked - this is so. But familiar, too, only began to these cutters, enjoy and have only odnozakhodnye such. So and is question what kind of RAZNITsA PRI work ODNOZAKhODNYMI And DVUKhZAKhODNYMI cutters, Since itself shavings downstairs and naturally pro regimes cutting.

0

4

Under using such with itself shavings in an effort prizhimaetsa itself detail, she not sdvigaetsa under cropping an, blowers is being squeezed by the very detail.

0

5

Is true. Pile is would still will attend, or need to adding any pietrowe to him had nowhere.
The main difference one thing and two zakhodnykh mills. Have odnozakhodnykh mills more coated's a gutter more itself the core of the and means can be to lend much strain, but two zakhodnye softly work, less the vibrancy

0

6

Have mills with corruption shavings down there is no splintering] so as she unfortunately from above, and with corruption upward raises from below and mostly when unfortunately against-fiber supplemented makes very badly chipped (under first you access). I'm using those, which look to for upward (the beginnings of slightly tolshe, 're just going to ignore reason smoothing)

Last edited by denpo (Aug 2 2010 11:11:18)

0

7

Such with the reverse of spiral (directing shavings in an effort) need mostly for moreover that-would not expense facade of. This as to saw lobzikom with reverse-destination teeth and splintering] on personified by there is no.

0

8

илья wrote:

such with the reverse of spiral (directing shavings in an effort) need mostly for moreover that-would not expense facade of. This as to saw lobzikom with reverse-destination teeth and splintering] on personified by there is no.

So facades MDF with the reverse of hand melaminovye, obyazvteotno sever. Importantly, to on Obama’s White splintering] not was. So think

0

9

I has tried such a a milling machine on Cold moulded plywood. She. The impression the most positive. Cutting max much cleaner, less need further deliberation as you will.

0

10

Blowers with the reverse of spiral so-called kompressionnonnaya. She Good those that is being squeezed by product to table and bad those that when a bit have is beginning to zaplavlyat
Those shavings, on a relic. So for cutting use odnozakhodnye such. And dvukhzakhodnye such use for s material on a certain depth.

0

11

I know that such cutters, in advertising enjoy, when goes cutting PVC or other materials already with nakleenymi films or lominatsiey, blowers not zaluplyaet well and clearly its rips through, unlike shavings upward, she little moreover that well's tearing up flamboyant still under it and those shavings, manages a roII.
But on expense of that should for 1 Passage material propilit otherwise car breaks down, here is here difference there is no, there is such at all without vykida shavings, they not of the needle.

0

12

prostoyi
Tried such with itself shavings down, now only they and'm using, slice cleaner splintering] there is no processed the surface cleaner "cisele there is no." Regimes those same that and on frezakh with removing the upper hand. Difference between 1 and 2 zakhodnymi observed only one 1 zakhodnaya holds much strain.

0

13

Such such are used if upper side facial, for prevent splintering] and vyryvov with the upper hand, cisele from processing such frezoy less not will become

0

14

Poul wrote:

slice cleaner splintering] there is no processed the surface cleaner "cisele there is no"

Blade wrote:

cisele from processing such frezoy less not will become

"Of beard" there is no on Facial, but on mounted enough. So on latest pass remont, mill on the usual LX "with itself shavings upward"

0

15

prostoyi wrote:

[on latest pass remont, a milling machine on the usual LX "with itself shavings upward"

There is cities such for net cut with two sides which have the lower and upper cutting edge trimming directed in different hand

0

16

Blade wrote:

There are cities such for net cut with two sides which have the lower and upper cutting edge trimming directed in different hand

In world many what there is.
But niei?u and near we why something seek make do, that have under hand.

0


You are here » Forum clan ChPUshnikov » Tool » Such with itself shavings down