Forum clan ChPUshnikov

User info

Welcome, Guest! Please login or register.


You are here » Forum clan ChPUshnikov » Looms with CNC » From whom their ???? made looms there is uploaded photo


From whom their ???? made looms there is uploaded photo

Posts 151 to 200 of 555

151

Respected!
All (as nepechalno) repeat Chinese oshibki- place shagoviki on screws directly.
The Chinese this make for declining sebestoimosti- this is logical, but only on khobbiynykh FVC.
Where you saw industrial looms with such Central. I not mean servy and the drives with compensating resonance.
Increasingly unless in resonances, for shagovogo dvigatelya- this "death" The longer than the propeller those Drebezg more. So you big speeds not arrive at nor stop more a powerful engine nor the drives.
Check a tick belt 1 :1 and you will feel difference.
I even on axis Z put belt and there is no problems. Someone puts connected, thereby are pushed back, resonance, but think, that connected help from passes steps.
For your press enough engines 18 kg.

Luck!

+1

152

raslab wrote:

Dear!
Check a tick belt 1 :1 and you will feel difference.
I even on axis Z put belt and there is no problems. For your press enough engines 18 kg.
Luck!

Thanks for Sharing (advice. If not it is difficult give, please photos your press (interested in knot installations belt).
P. S. Today brought together axis W. On this axis is worth Motorhead429 / sandbox 1605, 700 mm. Without problems broke a disperse the axis until 3,500 mm per minute, 300 mm / sek2. Conclusion simple: Than longer than the Motorhead429 / sandbox, the less maximal the speed.

0

153

Very just-- belt with step 3mm. From rubanka. Pulleys 1 :1 proizvoditeley himself, Motorhead429 / sandbox 16kh5

http://se.uploads.ru/t/iQr8U.jpg

Last edited by raslab (Sep 21 2014 17:31:45)

0

154

raslab
There is the same the problem, in settings of motors in mache give 1,000 mm / mines all'oc, under 1600 and more goes disruption. Did resonance? Long, lvy top of your rotor 950 and ?1,100. Controller 330 from purelozhika

Last edited by Abodin (Sep 22 2014 07:44:37)

0

155

Of course, can be and other reasons, it is difficult say not seeing, but one of osnovnykh- this resonance. (If of course there is no wedge)
Homilies reverse micro step, acceleration.

0

156

http://pixs.ru/showimage/Moystanok1_2819088_13970073.jpg
And here is my machine 1250kh1200kh170

0

157

--
That the the not vstavilas. Stuck still times.

0

158

That the with photo not is obtained. Can video goes

+1

159

Spent a small modernization his press,
Established spindle with water cooling 1.5 kW,
Made automatic highlighting labor zone.
http://se.uploads.ru/t/vp6Wf.jpg
http://se.uploads.ru/t/KO7WE.jpg
http://se.uploads.ru/t/AYBqf.jpg
http://se.uploads.ru/t/dlLnH.jpg

0

160

And here is and my :)

0

161

http://se.uploads.ru/t/Bz8hJ.jpg

0

162

major wrote:

trif, here is found today on calculator for calculation maximal gather steam; for Motorhead429 / sandbox. Calculator Motorhead429 / sandbox
If to believe this a calculator, for my length Motorhead429 / sandbox (1,300 mm) higher 221 R.P.M., respectively 1105 mm / shadowing Me not rise.


Like here is wrote recently. That the message not ‘ or erased.
A calculator not trust. Checked its machine. Max. The speed 2200mm / shadowing On BMP axes. Runs round quietly. Higher the speed 2600 to example is beginning to vibration to lend.
Electronics Chinese. To change not d so as on sale machine followed.

0

163

Dismantled today first those shavings,, model of those that for free found, resonance so and not won, the speed maximal on X, Y 1000mm / min
Video

0

164

http://sd.uploads.ru/t/EXdZI.jpg
On drawings from networks.

0

165

Not it there are gatekeepers with compensating resonance

0

166

Here is want show and its baby. Workplace of field 900 - 600 -350mm. Kinda glanced have someone on the vastness of, but has brought and their ideas. For the quality of pledge not kicking. https://yadi.sk/i/6btVlDa8bz7qj https://yadi.sk/i/1Ix2zw9fbz7rt Don’t can insert photo.

Last edited by олег78 (Oct 14 2014 04:00:36)

0

167

And here is my stanochek! 1100kh690kh90 on tree
NCStudio PCIMC-3-D spindle 2.2 kW (7kg) (a tough a disease great change on 1.5)
X1605 ST57-100 on direct without gearbox
Y2005 ST86-150 belt
Z1605 ST57-100 belt on engine, sir a small gear shaft on gear is shvp much (are unsure advise)
Until the other with vibration of beams (currencies only with one hand beams)
Help accelerate work axis z. Think currencies built on 1610 put or the motor stronger either try stepper Nord servo technology couples.
http://sa.uploads.ru/t/X1fLK.jpg

Last edited by 3a_BDB (Oct 18 2014 22:00:19)

+1

168

3a_BDB wrote:

and here is my stanochek! 1100kh690kh90 on tree
NCStudio PCIMC-3-D spindle 2.2 kW (7kg) (a tough a disease great change on 1.5)
                   
Until the other with vibration of beams (currencies only with one hand beams)
Help accelerate work axis z. Think currencies built on 1610 put or the motor stronger either try stepper Nord servo technology couples.

Spindle 2.2 kW and 1,5kVt not particularly in weight differ.
Or built on 1610 currencies or increase tension

0

169

Firstborn vehicle. http://sa.uploads.ru/t/IF5bM.jpg

0

170

http://sa.uploads.ru/t/viVgA.jpg
Ah almost carried until mind)

Last edited by Casper_zlo (Oct 26 2014 13:03:18)

0

171

Here is broke a insert photo press.
Governance Kflop-Kanalog and servy yaskava.
[/IMG][/url]--http://s014.radikal.ru/i329/1410/0c/d4a17f6ca094.jpg

On days from remnants of from two looms brought together 4-defective axis but under pioneering Serwa entered rezonanas and belt's dumpin 'exhaust and ruptured. Now await the when plains a new.
http://s020.radikal.ru/i707/1410/87/e6dec6bc5d4a.jpg

+2

172

So. I newcomer. Only getting my bearings. Ah as say, long go... I go around yes about and decided to enter in course affairs. Used match heads. Extremely budget mechanism for ???? opportunities. If increasingly tickles, tuned much bigger problems than.
Here is – my pazorische :))
http://sa.uploads.ru/t/bvZGp.jpg
Am asking strictly not judge, know that messed up, but created for verification - do shit about that-nepopru.

+4

173

andsin wrote:

Skyfall drawings from networks.

I have accurately such a construction, 't seek way to move on normal that direct.

Casper_zlo wrote:

Nu almost carried until mind)

Edited Casper,’s organs is zlo (26-10-2014 13 :03: 18)

To you question, from what made bokovinki? Steel or dyural? And as they krepleny to start with herself?

Last edited by Davo_616742 (Nov 23 2014 18:32:01)

0

174

konstantinshr wrote:

brought together 4-defective axis

And can be photo the back her see? Ambivalent patron where taking? He samotsentriruyuschiysya??

0

175

Strongly NOT kicking. http://sa.uploads.ru/t/B4Wdb.jpg

+3

176

'll post an and their two brainchild. This their initial kind of.
1. Workplace of field 1200kh800 http://sa.uploads.ru/t/dQhml.jpg

2. Workplace of field 600kh700 http://sa.uploads.ru/t/N5on4.jpg
Big had year. A month ago I his overhauled the
http://sa.uploads.ru/t/ie6JP.jpg
Small now matter reconstruction. http://sa.uploads.ru/t/OE7Fq.jpg

0

177

Енот 1 wrote:

So. I newcomer. Only getting my bearings. Ah as say, long go... I go around yes about and decided to enter in course affairs. Used match heads. Extremely budget mechanism for ???? opportunities. If increasingly tickles, tuned much bigger problems than.
Here is – my pazorische :))
http://sa.uploads.ru/t/bvZGp.jpg
Am asking strictly not judge, know that messed up, but created for verification - do shit about that-nepopru.

Eyes fear and hands make.
As you have implemented fastening axis X (the most the lower).
I committed mistake and lost rigidity this axis on his small 45kW. (Post181).
So in this moment - I'm redoing.
Budget limited, so do on corner of the and commercials.
The bottom line that I want establish’having (to rotating blade worked in mid-between rollers), and that direct will move with table.
Hope that tomorrow will be able posting photo my engineering.

0

178

mardan wrote:

How you have implemented fastening axis X (the most the lower)

Beam-the sled-the table-- but this would still on a sample.
Now already designed on 99,9% a normal machine with zero. On days start to saw.

0

179

mardan wrote:

Coven fear and hands make.
As you have implemented fastening axis X (the most the lower).
I committed mistake and lost rigidity this axis on his small 45kW. (Post181).
So in this moment - I'm redoing.
Budget limited, so do on corner of the and commercials.
The bottom line that I want establish’having (to blowers worked in mid-between rollers), and that direct will move with table.
Hope that tomorrow will be able posting photo my engineering.

Hello. I have there is such motors. What think the driver you are using.

0

180

My machine
http://sa.uploads.ru/t/fOtXs.jpg
My machine

Last edited by qweras (Dec 4 2014 15:03:42)

+1

181

Stanochek 1200kh900kh200
http://sa.uploads.ru/t/lC840.jpg

+1

182

Енот 1 wrote:

2009 / wrote (and):

As you have implemented fastening axis X (the most the lower)

Beam-the sled-the table-- but this would still on you.
Now already designed on 99,9% a normal machine with zero. On days start to saw.

Put today modified formatting axis H.
Here is this option I had in view when asked you have.
In my case’enshrined on an entrenched pivot, would still the remote from spindles (on 100mm on axis X) me seems that in this case zone processing templates will harsher. Guru hope by first me, if I wrong. http://sa.uploads.ru/t/nTzcG.jpg
http://sa.uploads.ru/t/kfCnM.jpg
http://sa.uploads.ru/t/rWmwv.jpg
http://sa.uploads.ru/t/4ko5y.jpg
Until bulkheads was contrary. That direct fixed, and’enshrined on flexible job table.
Closer to the edges of the rigidity, can be said that no.
Sorry for something that you this grant my full, but not want that would other heroes of on these past.
Hope that broke a. Tomorrow am about tests.

0

183

QwerasZdravstvuyte. I have there is such motors. What driver you are using.


You what templating engines interested:
DShI200-2-2
You 23HS2430 (big machine)
You 23HS2430V (am installing in return DShI)
Deregulations on 3 axis (blue) and on 4 axis (Red).

Simply under my design looms (+ - 1km) DShI yen) steps.
To come agony have led to solving problems more easy way - replace. :blush:

Last edited by mardan (Dec 5 2014 16:07:47)

0

184

mardan wrote:

qwerasZdravstvuyte. I have there is such motors. What driver you are using.

You what templating engines interested:
DShI200-2-2
You 23HS2430 (big machine)
You 23HS2430V (am installing in return DShI)
Deregulations on 3 axis (blue) and on 4 axis (Red).

Simply under my design looms (+ - 1km) DShI yen) steps.
To come agony have led to solving problems more easy way - replace.

Edited 2009 / (Today 15 :07: 47)

Nutrition on templating engines DShI200-2-2 is pants ??? on 3.5 A?
I have petroleum engines 3.5N.m 34HS8801 NEMA34. Driver'm using here is such
http://sa.uploads.ru/t/3Ugnj.jpg

0

185

I has replaced only DShI on you.
Deregulations was blue and red (I'm on a budget).
Now over time change and paid on such same driver. This better than my option, but more expensive.
I limited once on voltazhu and capacity.
You have such restrictions less.

0

186

UCHENIK wrote:

INTENSELY NOT kicking

Am asking forgiveness, spindle air cooling? :confused:

+1

187

I have until only 3-D model in pro-league engineer. Now I'm carving Corps have contractor.

http://sa.uploads.ru/t/If6nk.jpg

0

188

Previous project - plasma 4500kh2300

http://sa.uploads.ru/t/1mpIv.jpg
http://sa.uploads.ru/t/jeOnB.jpg

0

189

http://sf.uploads.ru/t/1lumi.jpg
http://sf.uploads.ru/t/wcqz4.jpg
http://sf.uploads.ru/t/lRBnP.jpg
Here is so broke a. Not third strictly the first time did.
Can who knows I have seed monitor SD infection 6560, instead spindles is worth deep not can enlist his through controller AS BE?

0

190

aleks007 wrote:

That so broke a. Not third strictly the first time did.
Can who knows I have seed monitor SD infection 6560, instead spindles is worth deep not can enlist his through controller AS BE?

Enlist through relays type such a+ DC from bloc nutrition -dc on the free output pin controller and skonfigurit mach3

0

191

aleks007 wrote:

That so broke a. Not third strictly the first time did.
Can who knows I have seed monitor SD infection 6560, instead spindles is worth deep not can enlist his through controller AS BE?

here is still bad one description of
A this for full fuck-upS (like me)nature--defined before what length to be to leave.

+2

192

https://yadi.sk/i/HfB5aHLodbv6o
Field 1.60 on 2.30

And here is such otChPUshil))
https://yadi.sk/i/G0IK9O9Bdfjuo

Last edited by екх (Dec 28 2014 16:12:29)

0

193

This the second machine built for 2014 Workplace of field 1,000's 750 mm. Budget-105. 0 thousand Br Time assemble 3 month. http://sf.uploads.ru/t/tL3V8.jpg
http://sf.uploads.ru/t/FVcpY.jpg

+1

194

Here is and my firstborn vehicle more precisely the second. The first was from plywood 10 mm lyufty were wild and distortions, incarnated his in metal. Spindle the motor 3,000 about. Shagoviki from banks through reducer, drivers custom with robozony.
http://sf.uploads.ru/t/Zjc9A.jpg
http://sf.uploads.ru/t/U9zFT.jpg
http://sf.uploads.ru/t/c8Ruj.jpg
http://sf.uploads.ru/t/aQbMy.jpg
http://sf.uploads.ru/t/TzyDZ.jpg
http://sf.uploads.ru/t/B5KFl.jpg
video work
https://yadi.sk/i/__3PjJwidnYZb
Was sucked me stankostroitelstvo and decided to muster that the on worse stolen 19 photo zigzag plotter like. Comets 6060 on his basis of brought together the third machine. https://yadi.sk/i/5DsEUPXcdnYrN
Chair for 20 shadowing
Axis Z and spindle homemade beskollektornyy aviamodelnyy engine 20 100,000 about. 200 wat.
X and Y Zaire under Chinese engines 57BYGH603 the drives DQ542MA.
Workplace of field 600kh700kh150, until on perform well 50 mm not was needs maximum bully.
The speed's. H. 1,200 mm / shadowing and chasing

+1

195

I brought together machine from aluminum question such a plan: What paint can be painting?

0

196

aleks007 wrote:

I brought together machine from aluminum question such a plan: What paint can be painting?

Paint can be any, but before painting can dig for aluminum is obligatory. Otherwise all success.

0

197

aleks007 wrote:

I brought together machine from aluminum question such a plan: What paint can be painting?


And why his piyasada?
Paint bears either defensive functions, either ornamental.
Dyuralka and so not rusts.
And looks perfectly.

And so you repaint, and will paint jobs lupitsya, would still somewhere not manages the surface correctly prepare.
And will worse look, than now.

0

198

sergkirov
Very reliable construction.
If there is photo in the process assembly, share.

0

199

sergkirov
How many on budget costing?

0

200

sergkirov
Thank you that shared photo assemble, very will help under assembling.
And can you persisted drawings?
If not particularly secretively, am asking will share :)

+1


You are here » Forum clan ChPUshnikov » Looms with CNC » From whom their ???? made looms there is uploaded photo