Forum clan ChPUshnikov

User info

Welcome, Guest! Please login or register.


You are here » Forum clan ChPUshnikov » Looms with CNC » Struggle with wood particles and dust.


Struggle with wood particles and dust.

Posts 101 to 150 of 266

101

timyr.m.63 wrote:

Oskarych
Ah of course. After all petty-petty dust increasingly would still passes. So-as was been decided not to do as on streets, Stubbed filter. Plus engine vacuum cleaner under inclusion immediately paranoiac a warm air (this not from schoolchildren engine). But'm using his only after processing, after change of oberfrezera on the 2,2kw ???? ??, ?? faded, dust not swells up. Here is how something so.

On sand trap, truth, something play rough, all need questioning. Razryazhenie. Even rings from wire 7mm not helped.


Here is how times from-for petty dust and asked. Process goes opinion, that this dust they may overdry to lopostyam and lifts on-quietly engine from by building. I have themselves filter (truth he on-less. From Volga) put before the engine of.

0

102

timyr.m.63 wrote:

Oskarych
Ah of course. After all petty-petty dust increasingly would still passes. So-as was been decided not to do as on streets, Stubbed filter. Plus engine vacuum cleaner bag under inclusion immediately paranoiac a warm air (this not from schoolchildren engine). But'm using his only after processing, after change of oberfrezera on the 2,2kw ???? ??, ?? faded, dust not swells up. Here is how something so.[/img]
On sand trap, truth, something play rough, all need questioning. Razryazhenie. Even rings from wire 7mm not helped.

Saw people make from plywood krestovinu, inward the septic tank. She like helps.

0

103

kang2k wrote:

work people make from plywood krestovinu, inward the septic tank. She like helps.


And you there is no photo such radius roll trailing? That the I poorly itself illustrate, as this

0

104

Оскарыч wrote:

kang2k wrote (and):

Saw people make from plywood krestovinu, inward the septic tank. She like helps.

And you there is no photo such radius roll trailing? That the I poorly itself illustrate, as this


'll look for. Here is such still option http://s56.radikal.ru/i153/1001/e2/043a4eae0310.jpg
Or tell vacuum valve Link

+1

105

Me today thought came. Can the entire machine slowly and in shell? On type as laser arrive. Anyone has tried? Think do lit wooden frame and "weedwacker" Plexiglas 1 mm.

0

106

Valery22 wrote:

“I don’t today thought came. Can the entire machine slowly and in shell? On type as laser arrive. Anyone has tried? Think do lit wooden frame and "weedwacker" Plexiglas 1 mm.

A respected, 1 minute search, on Forum, suggests on subject produce a protective shell for press

0

107

And I in as a brushes used old deconstructing the car cell, govern implementation stripes and balled its on a plank of wood there, it yoke around the circle

0

108

There is vision use the old vacuum, but have him a plastic toy build within, here is think pokolet his or not? Or better all ??? something another?

0

109

Valery22 wrote:

“I don’t today thought came. Can the entire machine slowly and in shell? On type as laser arrive. Anyone has tried? Think do lit wooden frame and "weedwacker" Plexiglas 1 mm.

, too, about this think, only as in the the Frost-from aluminium profiles and plexiglas. Type the table, and vacuum and separator under him. And all of this closed ogsteklom
But there is one moment-if air drive within this design around the circle-there is suspicion that he will getting hot. And to do this is quite quickly.

0

110

After first experience work on computer numerically controlled concluded, that struzhkootsos - thing very badly in items, vacuum very perishing quickly keeps clogging up, a little sack have him a small. I mentioned once orfamily me in networks a homemade struzhkootsos and decided to do such a on memory. Went in OBI, bought blue a vessel, which there established itself as "up for water 32l" and two kanalіzatsіynikh union to connect on 32, one under 45 ° and one under 90 ° and a small slice of pipes the same diameter. For cyclone decided to use handled cartridge from copying apparatus. Hour unhasting work lobzikom and why and here is outcome.
Himself a device in collects
http://sf.uploads.ru/t/NwKDS.jpg

Device cyclone
http://sf.uploads.ru/t/hie0D.jpg

Fastening to bumper
http://sf.uploads.ru/t/Iw4pC.jpg
http://sf.uploads.ru/t/74WGf.jpg

Remain from within
http://sf.uploads.ru/t/nJ2A6.jpg

Outcome a small verification
http://sf.uploads.ru/t/w41LA.jpg

Judging by around the the entire petty dust so and will stray in vacuum, ah yes and let, but steel wool will certainly remain in the bucket.

0

111

Dan’s organs is devil- as I already spoke Wu me such construction and in this vacuum cleaner. After several hours work absolutely a new filter was only slightly covered with very very petty dust. No shavings, nothing. All in the bucket. Because I Therapist actually in this nothing not understand-was pleased amused efficiency such a tired prisposoba :)

0

112

With by shady cover arose the easy I. Well, that, as a bit lazy to do immediately is thorough, and used cardboard box. There is the problem access to start with herself, under table. So same not very conveniently stowed, up a blank. If to do, then with three Bistro offers several types ”. And better immediately with 4mya) There are habit along the table come the long condiments, emerging markets force for structure gauge press. Until think in this direction.
Still emerged thought do suction for shavings soosnyy groundbreaking linear technology, but until not illustrate as realize pillar. Want to leave lot more room for reviews of the and boost the speed flow of.

Last edited by Valery22 (Jan 27 2015 18:51:48)

0

113

Valery22, here is I as times, too, think about how, that would do boxing for press and together with those preserve opportunity to work with not Peter and modules "Kvant. Came such a here is idea:
http://se.uploads.ru/t/dc9ZI.jpg
Do in lateral duct walls propily wide with labor the surface press and photographers their than something. Than zaveshivat until not decided to, yes and easier try various materials - bristles broad paint premier, thread from plastic bottles, rubberized fabric.
On expense a bit of suction me here is such a idea liked and in the future plan do something similar? The on exiled below
--

Text or Alcoa, not swear, if that, but booting the images joining lagaet, times 15 tried download.

Last edited by dan_d (Jan 27 2015 20:02:16)

0

114

Here is labor construction.
http://forum.woodtools.ru/index.php?topic=38382.0

+1

115

Remain ???? from improvised materials.
https://yadi.sk/d/7uW2JbMdeHYHD

+2

116

dan_d wrote:

Valery22, here is I as times, too, think about how, that would do boxing for press and together with those preserve opportunity to work with not Peter and modules "Kvant. Came such a here is idea:

Do in lateral duct walls propily wide with labor the surface press and photographers their than something. Than zaveshivat until not decided to, yes and easier try various materials - bristles broad paint premier, thread from plastic bottles, rubberized fabric.
On expense a bit of suction me here is such a idea liked and in the future plan do something similar? The on exiled below
--

Text or Alcoa, not swear, if that, but booting the images joining lagaet, times 15 tried download.

Edited dan’s organs is d (Yesterday 20 :02: 16)

Close your an end cap from the same material, that and himself box. So you save "design construction / pyle isolation." Certainly not so often account for work with "negabaritom" and then enough open, tinker and close.

0

117

Valery22 wrote:

and boost the speed flow of.

Don’t follow the data by. Emerges a strong whistling. Two the evening experimentation. Suction even worse (on senses here) than simply hose alongside frezoy.

0

118

For spindles on 800 watt came to such a varintu as the most economical http://se.uploads.ru/t/Zt5sy.jpgstruzhkootsos interskol, Chinese remain and plastic barrel. As in sight on photo bag struzhkotsosa empty

0

119

Accidentally found on such here is authentic

http://www.ebay.com/itm/100pcs-3mm-X-1m … 43d3deab1a

Bought dozen, 5mm in diameter. Cool, get otderesh. Especially from each other. Stuck do a lockable-removable pillar, where Brush will on them (truth until it is unclear, on that their be stuck (took a small Tube tool epoksidki (more precisely two) vdogonkhu. There is suspicion that and epoksidki will little. Ah consider that will.
Who thread has tried?

Last edited by Bob909 (Feb 26 2015 19:59:23)

0

120

Bob909 wrote:

who thread has tried?

In the process. Bought neodymium employing for magnets on refrigerator. They proved too powerful - not chisel off. Construction is ready, remained insert pile is.

Kind of from above:
http://se.uploads.ru/t/ipHyl.jpg
Kind of from below:
http://se.uploads.ru/t/D0HAT.jpg
Overall kind of:
http://se.uploads.ru/t/TIXRB.jpg

Employing d try stowed, on epoksidke, if not tickles - shurupom with potaem.
Efforts magnets lack for eyes. When plan to offer one part of over another the lower bouncing around like this centimeters on 5. Need to will measure effort with the help live scale.
If interestingly - write, 'm gonna throw vector. Further between large and small holes will make out of kilter and radially in 1,85 - komformant, to freely move dealer’s shoe on groundbreaking linear technology.

Kamovskiy file here:

Hidden text:

To view hidden text please login or register.

I was cutting on him, then may have brought manually. If get back a little shape vector... now can be and without this. Should tickles three details. One of plywood 20 mm. (Which to groundbreaking linear technology) two from plywood 10 mm. In one of which is inserted pile is and mounting your to another 10 mm.

Last edited by Dok (Feb 28 2015 12:49:05)

0

121

Curious variant-

http://kk.org/wp-content/archiveimages/ShopBot%20Desktop%20CNC%20Router%20Digital%20Fabrication%20Tool.jpeg

0

122

dan_d wrote:

To cyclone decided to use handled cartridge from copying apparatus. Hour unhasting work lobzikom and why and here is outcome.
Himself a device in collects
http://sf.uploads.ru/t/NwKDS.jpg


Have you pochchemu the flow of shavings goes against shell trunk cyclone? Ribs of the cushion the speed. Redo these reduces condensation in dark side and effectiveness cyclone will 99%

0

123

Made such remain http://se.uploads.ru/t/6zGiD.jpg. The idea was no chair or any space directly engine from vacuum cleaner, to this was fully-fledged vacuum. Works well. Engine from's Vortex, his not pity. Stood engine from Chinese vacuum cleaner on 1800vt (at all they, was incinerated by. Suspect. Was incinerated by because, that there is no filter before the engine of. Think, what put. Could you tell me, please who what filters uses? Want go in movable store, there anything find, so not know that I need. Help, please.

0

124

I did the pourer on spindle from transparent acrylic,. Instead mirror - studded stretch of transparent PVC. The crux of the idea in is, to through such material was in sight mill and place cut. Constructively "dealer’s shoe" this consists of two answered so, that one tightly sits on panel, and the other is pressed to him from below ('m using for this 2 stationery load). Conveniently those, that the lower part of easily destabilized and access to tsange becomes fully besprepyatstvennym. As something so:

http://se.uploads.ru/t/UoINb.jpg

For vacuum cleaner was made sealed "sarcophagus" with it. So his almost not heard and as not blows on sides, dust around not, Dick and Harry seems. And in "the sarcophagus", on other side, was done hole 100mm, camping on E. Vacuum not was locked up tighter fully and could "breathe."

http://se.uploads.ru/t/i9ljp.jpg

And so increasingly has worked enough long time (mainly on tree,, it's engraved here and camping on P.) without problems. Until I not faced with frezerovkoy kaprolona. Milling need was many. Rotating blade 12mm. Here is here and it turned out, that vacuum keeps clogging up almost immediately. Span shavings which made their from seemed would a small Alternatively milling, scored a vacuum cleaner on so much, on how many Colored steel wool / tyrsa've rolled his for far greater interval time and with more material. In been!
I first thought find the exit through use cyclone. Bought specifically calculated under Pressure and, made under him basket (she deformed from vacuum, as here was have other, had to it ribs at the expense of rigidities to do), actually right lid firmly, prorezinil the brink. Spharischen like increasingly much authenticity matters the ramifications. But in deeds this remain proved not capable eliminate this type of shavings (with wood worked perfectly). Moreover, he even the paranoia situation. Kaprolonovaya steel wool has become cowering in really tsiklone. A vacuum cleaner works, and traction there is no. I not immediately did in fix deal. When lo and behold - and remain it simply fact dead.
Spharischen'm reminded me words, which bells in this the Frost controlled higher:

vitlena wrote:

men want you save time and money. Here is these are gadgets this all goffing around web.. Subtler hoses get caught.
That would not zamarachivatsya the buy KORVERT.. Suction on condensation should be not less 100mm in diamere. Engine should be asinkhronik.


Thus had to one and buy struzhkosos. Took FDB ST 300. But, as spoke Leonid Kanevsky - "This is already quite different story" 8-)

http://se.uploads.ru/t/rfKAN.jpghttp://se.uploads.ru/t/3gTnJ.jpg

+1

125

Without vacuum cleaner bag work impossible, the entire the workshop in dust. Had to do such a lid firmly on the plastic build. From above put the motor from old vacuum cleaner.
http://se.uploads.ru/t/hXWl3.jpg
http://se.uploads.ru/t/LnxG1.jpg
http://se.uploads.ru/t/xvtcV.jpg
http://se.uploads.ru/t/m8aWC.jpg

0

126

One way struggle with dust. Made the lunchbox. All glass (. Remained lead the there hose from vacuum cleaner bag. Still want do the forcible extraction of the and put what any's a weakling hungry fan with carbon squarely on streets, that would in the basket was permanent vozdukhoobmen together and the workshop will provetrivatsya. Already obtain very himself airy construction of. Until this vacuumed entire masterful. After 20-hour exploitation press on the table alongside leave the computer on nor specks of dust. Ah and within to vacuum it deal 10 minutes. In general argumentirovannaya criticism welcome. Crap for the quality of pictures. On Today's day already more 50 hours expertize, do with Dust there is no. All within. http://se.uploads.ru/t/pfqCG.jpg
http://se.uploads.ru/t/G9CB0.jpg

+1

127

Super! If there is place and size allow (and also means) -korobochka in my the most the optimal option. Reality the first that immediately me time come in head. The location, a vacuum cleaner and build down, typewriter, sir -naverkh. Talk I wanted to the brink do high (I have machine in been less) and semicircular and use got a big-ass slice of delicate, flexible plexiglas.

http://emojipedia.org/wp-content/uploads/2013/08/107-thumbs-up-sign.png

0

128

The cost of boxes, by the seek to to zero. The only that realistically is worth money this the Plexiglas! The functioning from trash, plywood, too, from any the skrinok (for bottle) Nu and work? So she same in joy especially if the result exasperated! Another surprise plus this reductions noise times in two. Accurately not measure it but on senses here very quietly.

0

129

serg429, and what the size of the press?

0

130

dan_d wrote:

serg429, and what the size of the press?

Workplace of field 600 on 900 In levels had to to do until ceiling. In first more air and second so was easier. Yes and exhaust hungry fan can be put bluntly in ceiling. Incidentally under processing negabarita machine can be extricate forward but then already will have dust breathe one more time.

+1

131

http://se.uploads.ru/t/tSDMR.jpg

Want do as on this photo but I have Chinese spindle on 2.2 kW with air cooling and I so understand have him cooling from above down and the flow of in the basket will from the bottom up?

0

132

Hello. Recently bought such timerand established not struzhkootsos. Very exasperated.

0

133

saa03 wrote:

I want do as on this photo but I have Chinese spindle on 2.2 kW with air cooling and I so understand have him cooling from above down and the flow of in the basket will from the bottom up?

You easier do less an animated box, to spindle remained outside. As example, - are looking this cornicing have t. Jacky82on this same page, post # 127

0

134

Виталик_87 wrote:

Hello. Recently bought such timer and established not struzhkootsos. Very exasperated.

For what?

0

135

saa03 wrote:

I want do as on this photo but I have Chinese spindle on 2.2 kW with air cooling and I so understand have him cooling from above down and the flow of in the basket will from the bottom up?

How I understood there box rigidly enshrined on axis Z. And spindle within. I would on dust air for cooling spindles put would resurfaced through gofru, all ??? pressure ????? to in spindle get sucked up dust from such.
Although as on me such a solution too rather bulky piece of and gmorno in for the valet. Better the very brush remains consolidate on axis Z and to leave only hole under a milling machine.

0

136

rubicon.17 wrote:

To what?

Timer includes and disables struzhkootsos through a predefined time.

0

137

Виталик_87 wrote:

Timer includes and disables struzhkootsos through a predefined time.

And machine accidentally not through mach3 is governed by?
There through braincontrol this realize can be.

0

138

ivp wrote:

A machine accidentally not through mach3 is governed by?
There through braincontrol this realize can be.

Through DSP-a remote control.

0

139

rubicon.17 wrote:

Vitalik’s organs is 87 wrote (and):

Hello. Recently bought such timer and established not struzhkootsos. Very exasperated.

For what?


I agree. Rudely having found spending on Khaled el. Energy quickly concluded that much of will have on vacuum (4 / 5). I have a good, inexpensive commercial vacuum (I had too much dozen) consumes 900w. On one horse more consumes 1300w. Not see need have his an embedded account all time if you one takes for example a small 3D picture\ terrain.
20-30 seconds periodically-more than enough that it comes to remove basic mass of shavings\ dust. Especially if she initially is fixed brushing for this affairs.
I to this conclusion came periodically beginning procedure described higher.

+1

140

When goes last but word processing, from under such flies almost-that flour.
I so thought, that to blow the vacuum cleaner with the entire dope there is no sense.
Vacuum the most the usual, that household, been.

I his plugged on 127 volts through transformer.
Broke a now, that he works silent and with a lesser productivity.
But so as I have place pilezhki closed high brushing, under it would still appears a slight vacuum of free space.
Much of dust moves away in pipe, on a small skrubber, part of I then collect separately pipe vacuum cleaner.
So that and noise less, and the result reach!

0

141

andyshcher64 wrote:

When goes last but word processing, from under such flies almost-that flour.
I so thought, that to blow the vacuum cleaner with the entire dope there is no sense.
A vacuum cleaner the most the usual, that household, been.

I his plugged on 127 volts through transformer.
Broke a now, that he works silent and with a lesser productivity.
But so as I have place pilezhki closed high brushing, under it would still appears a slight vacuum of free space.
Much of dust moves away in pipe, on a small skrubber, part of I then collect separately pipe vacuum cleaner.
So that and noise less, and the result reach!

Hmm. Thanks for Sharing (idea with tranformatorom. I have there is manual prerogatives. Here is such

http://www.amazon.com/Harbor-Freight-To … ed+control

Need to will try enlist his to Kone vacuum, watch that will

0

142

Bob909 wrote:

I have there is manual prerogatives. Here is such


Why have him written 120 volts input tension?
At least - on photo so.

Still nyuans.
Have my old vacuum cleaner there is no and not was no regulator within.
Simple universal kollektornaya machine.

So whether deal, consider world you have?

+1

143

Bob909 wrote:

I have there is manual prerogatives. Here is such

you confident that he on 220V?

andyshcher64 wrote:

Simple universal kollektornaya machine.

Skyfall the idea of kollektornomu to the engine be the respiration work. Recess or postoyanke. Its the old frezer chord (truss construction) included through diodnyy bridge and teams tension latrom. Fraser many silent worked, less iskril and under MAK, anyway. Tensions tried to "might soar" (the).

0

144

Only yesterday brought together and has experienced a small stanochek (rather even deysvuyuschiy layout from podnozhnykh materials).
Did, to not erupt into on all past under designing large.
Under test immediately originated problems with particles.
At the work you with backed by rugged Pine clad grounds of sawdust not very many and they lie that if, problem textures MDF - mountain small grounds of sawdust.
All neudobstvo- shut out workplace of field, but not very spread. Can be and brushing to remove.
Under parallel, on lakirovannom the TDI in the air petty's works, popadayuschaya in lungs. And this with, that spindle homemade and nizkooborotnyy (about 3,000 about / mines).
With the vacuum cleaner work nekomfortno- many noise.
On pevomu experience concluded - have devices undoing wood dust should be two regime

- one constantly vklyuchenyy with faint productivity and so cozy. will definitely stay - for undoing petty faction (perhaps with their filters)

And the second with big of a, which insurance is periodically (on timer or programno), by removing a major faction.

Last edited by Ферроман (Apr 8 2015 18:46:58)

0

145

valb wrote:

Skyfall the idea of kollektornomu to the engine would still respiration work.


Um.
Here there is nyuans.
Universal kollektornaya machine - this separate subtype is engines.
(Still his call kollektornoy machine phase 230V AC power).
It indeed would still.

In definition of "kollektornyy engine" includes and engines a permanent-( kollektornaya machine a permanent-).
Under 1946.Make affinities between Dniepropetrovsk and UKM all OK ??? there are differences.
And above all in execution magnitoprovoda machine bed and poles.

Here is so I and asked Bob909about type engine, the prescribed in vacuum.
For no one not prevents malicious those suckers, by building its system governance lawyers of, put there the other type of engine.
Then from transformer or LATRa his operate will cannot be.

+1

146

Ферроман wrote:

Only yesterday brought together and has experienced a small stanochek (rather even deysvuyuschiy layout from podnozhnykh materials).
Did, to not erupt into on all past under designing large.
Under test immediately originated problems with particles.
At the work you with backed by rugged Pine clad grounds of sawdust not very many and they lie that if, problem textures MDF - mountain small grounds of sawdust.
All neudobstvo- shut out workplace of field, but not very spread. Can be and brushing to remove.
Under parallel, on lakirovannom the TDI in the air petty's works, popadayuschaya in lungs. And this with, that spindle homemade and nizkooborotnyy (about 3,000 about per minute).
With the vacuum cleaner work nekomfortno- many noise.
On pevomu experience concluded - have devices undoing wood dust should be two regime

- one constantly vklyuchenyy with faint productivity and so cozy. will definitely stay - for undoing petty faction (perhaps with their filters)

And the second with big of a, which insurance is periodically (on timer or programno), by removing a major faction.

Edited Ferroman (Yesterday 18 :46: 58)


There is still such factor - until steel wool flies from under such, its get sucked up easier. If she had a good soak and on it couple of times blowers has passed in narrow the shell - its can be only dig.
Precisely in narrow cracks of steel wool represents the danger.

0

147

andyshcher64 wrote:

For no one not prevents malicious those suckers, by building its system governance lawyers of, put there the other type of engine.

Under nutrition through Lattre and diodnyy bridge tension drop an on engine. Scheme governance lawyers of our firm satellites were taken into nominal, end up tossing unambiguously.
Let even engine will and without windings for electrical arousal, and with magnets. Nothing we not risk. Only number of gather steam;. Under constant tensions traction will more. In courses case with Fermom simply free time the right traction. Roughly worker regime was 180-200 Volt.

0

148

Men, not worry about finishing repairs with the punches. I OK in her lair these the most the evil burzhuinov. Feet if you prefer, inches and other devices. In including and tension, Knightsbridge in 120 V
Incidentally I plugged vacuum through the prerogatives, that higher-looking good, Pembry all broke a, still times thank you the for idea! Later, too, stuck timer no chair or any space.

0

149

Greetings all!

In this fact kettle
Decided to clone will pylezbornik bought a snail capacity rock formations. 500V, turnover 2600, blows is famously. Hose-reinforced dozen 50mm + sanitation pipes actually right from-marked Lemur and and transparent PVC
Brought together all of this broke a not so as like, the problem is that capacity suction is worsening pulling worse conventional vacuum cleaner who al in this fact could you tell me pl-the kind that I so not made?

Here is photo

http://sg.uploads.ru/t/RjANX.jpg

http://sh.uploads.ru/t/V173R.jpg

http://sg.uploads.ru/t/42VcW.jpg
http://sg.uploads.ru/t/j1f2t.jpg
http://sg.uploads.ru/t/451zS.jpghttp://sh.uploads.ru/t/b9IXP.jpg

Last edited by Shutter (Apr 11 2015 10:34:58)

0

150

Try increase dozen suction a garden hose to a until 100mm

Last edited by peka (Apr 11 2015 11:01:42)

0


You are here » Forum clan ChPUshnikov » Looms with CNC » Struggle with wood particles and dust.