Forum clan ChPUshnikov

User info

Welcome, Guest! Please login or register.


You are here » Forum clan ChPUshnikov » All on ArtCAM » Write on postprotsessor under their needs (Razbiraem on spare parts collect)


Write on postprotsessor under their needs (Razbiraem on spare parts collect)

Posts 1 to 100 of 311

1

Abide the standard postprotsessor … .axyz.con

He is on address by default C:\ Program Files\ ArtCAM 2009\ postp\
The full text the file mock target below

;
; Fanuc configuration file
;
; History
;
; Who When What
; === ======== ========================================
; BEM 01/04/94 Written
;
; bem 21/03/00 Added DESCRIPTION and FILE_EXTENSION fields
;
;
DESCRIPTION = "Axyz (*.nc)"
;
FILE_EXTENSION = "nc"
;

UNITS = MM
;
; Cariage return - line feed at end of each line
;
END_OF_LINE = " [13][10]"
;
; Block numbering
;
LINE_NUM_START = 0
LINE_NUM_INCREMENT = 10
LINE_NUM_MAXIMUM = 999999
;
; Set up default formating for variables
;
; Line numbering
FORMAT = [N|@|N|1.0]
; Spindle Speed
FORMAT = [S|@|S|1.0]
; Feed Rate
FORMAT = [F|#|F|1.1]
; Tool moves in x,y and z
FORMAT = [X|#|X|1.3]
FORMAT = [Y|#|Y|1.3]
FORMAT = [Z|#|Z|1.3]
; Home tool positions
FORMAT = [XH|@|X|1.3]
FORMAT = [YH|@|Y|1.3]
FORMAT = [ZH|@|Z|1.3]
;
; Set up program header
;
START = "%"
START = " :1 248"
START = " [N]G91G28X0Y0Z0"
START = " [N]G40G17G80G49"
START = " [N]T1M6"
START = " [N]G90G54"
START = " [N]G43 [ZH]H1"
START = " [N]G0 [XH][YH][S]M3"
;
; Program moves
;
RAPID_RATE_MOVE = " [N]G0 [X][Y][Z]"
FIRST_FEED_RATE_MOVE = " [N]G1 [X][Y][Z][F]"
FEED_RATE_MOVE = " [N][X][Y][Z]"
;
; End of file
;
END = " [N]G28G91Z0"
END = " [N]G49H0"
END = " [N]G28X0Y0"
END = " [N]M30"

Tear down on parts.
Increasingly that begins with symbol of a; is called comment and can be been removed … ….

Get

DESCRIPTION = "Axyz (*.nc)"
FILE_EXTENSION = "nc"
UNITS = MM
END_OF_LINE = " [13][10]"
LINE_NUM_START = 0
LINE_NUM_INCREMENT = 10
LINE_NUM_MAXIMUM = 999999
FORMAT = [N|@|N|1.0]
FORMAT = [S|@|S|1.0]
FORMAT = [F|#|F|1.1]
FORMAT = [X|#|X|1.3]
FORMAT = [Y|#|Y|1.3]
FORMAT = [Z|#|Z|1.3]
FORMAT = [XH|@|X|1.3]
FORMAT = [YH|@|Y|1.3]
FORMAT = [ZH|@|Z|1.3]
START = "%"
START = " :1 248"
START = " [N]G91G28X0Y0Z0"
START = " [N]G40G17G80G49"
START = " [N]T1M6"
START = " [N]G90G54"
START = " [N]G43 [ZH]H1"
START = " [N]G0 [XH][YH][S]M3"
RAPID_RATE_MOVE = " [N]G0 [X][Y][Z]"
FIRST_FEED_RATE_MOVE = " [N]G1 [X][Y][Z][F]"
FEED_RATE_MOVE = " [N][X][Y][Z]"
END = " [N]G28G91Z0"
END = " [N]G49H0"
END = " [N]G28X0Y0"
END = " [N]M30"

're painting the on blocks and immediately edit

;
Description = "Axyz (• .nc)" - name postprotsessora in artkame
;
File’s organs is Extension = "nc" – enlargement file
;
Units command = MM – units of measure
;
Can be to change here is this Axyz (• .nc) and this nc
Can be reverse of course and MM but after all you same not Yank's and inches not your unit measure … … ….

Last edited by lionkingofpersia (Sep 6 2011 18:26:17)

0

2

We are going further … ….

; Cariage return - line feed at end of each line
;
End’s organs is OF’s organs is LINE = "[13][10]" this leave in alone
;
; Block numbering – this bloc numbering
;
Line’s organs is NUM’s organs is START = 0 – the first line in Jeul Pan
Line’s organs is NUM’s organs is increment = 10 – gains each next the premier
Line’s organs is NUM’s organs is MAXIMUM = if resources – ing lu not can exceed if resources lines for

Us leave this bloc in alone … … … …

The next bloc more interesting and from him more Warlord after editing … …

; Set up default formating for variables
;
; Line numbering
Format = [N|@|N|1.0]– this first painted format the premier (not now touch)
; Spindle Speed
Format = [S|@|S|1.0]– this first painted format the premier speed spindles (not now touch)
; Feed Rate
Format = [F|#|F|1.1]– this first painted format the premier delays (not now touch)
; Tool moves in x,y and z
Format = [X|#|X|1.3]– this first painted format the premier with position a X (global 3 on 2 or 1, this the accuracy of, number of signs after semicolon. This reduces the size of the ing lu. (I have is worth 1, camping on E. 0.1, this enough for tree of)
Format = [Y|#|Y|1.3]– this first painted format the premier with position a Y (global 3 on 2 or 1, this the accuracy of, number of signs after semicolon. This reduces the size of the ing lu. (I have is worth 1, camping on E. 0.1, this enough for tree of)
Format = [Z|#|Z|1.3]– this first painted format the premier with position a Z (global 3 on 2 or 1, this the accuracy of, number of signs after semicolon. This reduces the size of the ing lu. (I have is worth 1, camping on E. 0.1, this enough for tree of)

; Home tool positions
Format = [XH|@|X|1.3]– this first painted format the premier with khom position (on Russian zero point) (global 3 on 2 or 1, this the accuracy of, number of signs after semicolon. This reduces the size of the ing lu. (I have is worth 1, camping on E. 0.1, this enough for tree of)

Format = [YH|@|Y|1.3]– this first painted format the premier with khom position (on Russian zero point) (global 3 on 2 or 1, this the accuracy of, number of signs after semicolon. This reduces the size of the ing lu. (I have is worth 1, camping on E. 0.1, this enough for tree of)

Format = [ZH|@|Z|1.3]– this first painted format the premier with khom position (on Russian zero point) (global 3 on 2 or 1, this the accuracy of, number of signs after semicolon. This reduces the size of the ing lu. (I have is worth 1, camping on E. 0.1, this enough for tree of)

0

3

Continue … … ….

; Set up program header
;
Start = "%" - can be not now touch, can be and kill string.
Start = ":1 GDP" - can be not now touch, can be and kill string.
Start = "[N]G91G28X0Y0Z0" - Assignment coordinates inkrementalnoy of last you provided when applying reference point (in umnyak ….) privalim and this line of the.
Start = "[N]G40G17G80G49" - Cancel compensation long tool
+) will workers planes (BMP, ZX, yz) + Cancel cycles drilling, rastachivaniya, narezaniya carving metchikom and camping on D. + Cancel compensation length tool (us leave)
Start = "[N]T1M6" - change tool (us leave)
Start = "[N]G90G54" - Assignment absolute coordinates support points trajectory + Switching on preset operator system coordinates (can be not now touch, can be and kill string)
Start = "[N]K43 (Rifle) [ZH]H1" - Kompensirovat length tool positively + movement Z in khom stance (us leave necessarily)
Start = "[N]G0 [XH][YH][S]M3" - accelerated displacement tool (an idle move) on axes X and Y in khom positions + pakostey rotation spindles on-hour arrow with speed S (S – specified in artkame in settings tool) (us leave necessarily)
;

Ur …. Spindle stands at it is time fulfill--even ing lu

RAPID_RATE_MOVE = " [N]G0 [X][Y][Z]"
FIRST_FEED_RATE_MOVE = " [N]G1 [X][Y][Z][F]"
FEED_RATE_MOVE = " [N][X][Y][Z]"

This bloc not global … …. Why … …. Yes because this simply the premier movement … …

Ltd. has shown great results ing lu … …. Toys- work … ….

; End of file
;
End = "[N]G28G91Z0" – privalivaem this string instead it write on "[N]G0 [ZH]" we Z in serve stance
End = "[N]G49H0" – privalivaem this string
End = "[N]G28X0Y0" – privalivaem this string instead it write on "[N]G0X0Y0"
End = "[N]M30" (us leave necessarily)

We his beat … … … broke a the next …

;
DESCRIPTION = "Axyz (*.nc)"
FILE_EXTENSION = "nc"
UNITS = MM
END_OF_LINE = " [13][10]"
LINE_NUM_START = 0
LINE_NUM_INCREMENT = 10
LINE_NUM_MAXIMUM = 999999
FORMAT = [N|@|N|1.0]
FORMAT = [S|@|S|1.0]
FORMAT = [F|#|F|1.1]
FORMAT = [X|#|X|1.1]
FORMAT = [Y|#|Y|1.1]
FORMAT = [Z|#|Z|1.1]
FORMAT = [XH|@|X|1.1]
FORMAT = [YH|@|Y|1.1]
FORMAT = [ZH|@|Z|1.1]
START = "%"
START = " :1 248"
START = " [N]G40G17G80G49"
START = " [N]T1M6"
START = " [N]G90G54"
START = " [N]G43 [ZH]H1"
START = " [N]G0 [XH][YH][S]M3"
RAPID_RATE_MOVE = " [N]G0 [X][Y][Z]"
FIRST_FEED_RATE_MOVE = " [N]G1 [X][Y][Z][F]"
FEED_RATE_MOVE = " [N][X][Y][Z]"
END = "G0 [ZH]"
END = "G0X0Y0"
END = "M30"

0

4

Lacks movements on zygomatic arches … ….
But this different story … … …. Vell … …. 'll tell ….

Need add bloc

FORMAT = [I|@|I|+1.3]
FORMAT = [J|@|J|+1.3]

And bloc

FIRST_CW_ARC_MOVE = " [N]G2 [X][Y][i][J][F]"
CW_ARC_MOVE = " [N]G2 [X][Y][i][J]"
;
FIRST_CCW_ARC_MOVE = " [N]G3 [X][Y][i][J][F]"
CCW_ARC_MOVE = " [N]G3 [X][Y][i][J]"

Tickles

;
DESCRIPTION = "Axyz (*.nc)"
FILE_EXTENSION = "nc"
UNITS = MM
END_OF_LINE = " [13][10]"
LINE_NUM_START = 0
LINE_NUM_INCREMENT = 10
LINE_NUM_MAXIMUM = 999999
FORMAT = [N|@|N|1.0]
FORMAT = [S|@|S|1.0]
FORMAT = [F|#|F|1.1]
FORMAT = [X|#|X|1.1]
FORMAT = [Y|#|Y|1.1]
FORMAT = [Z|#|Z|1.1]
FORMAT = [XH|@|X|1.1]
FORMAT = [YH|@|Y|1.1]
FORMAT = [ZH|@|Z|1.1]
FORMAT = [I|@|I|+1.3]
FORMAT = [J|@|J|+1.3]
START = "%"
START = " :1 248"
START = " [N]G40G17G80G49"
START = " [N]T1M6"
START = " [N]G90G54"
START = " [N]G43 [ZH]H1"
START = " [N]G0 [XH][YH][S]M3"
RAPID_RATE_MOVE = " [N]G0 [X][Y][Z]"
FIRST_FEED_RATE_MOVE = " [N]G1 [X][Y][Z][F]"
FEED_RATE_MOVE = " [N][X][Y][Z]"
FIRST_CW_ARC_MOVE = " [N]G2 [X][Y][i][J][F]"
CW_ARC_MOVE = " [N]G2 [X][Y][i][J]"
FIRST_CCW_ARC_MOVE = " [N]G3 [X][Y][i][J][F]"
CCW_ARC_MOVE = " [N]G3 [X][Y][i][J]"
END = "G0 [ZH]"
END = "G0X0Y0"
END = "M30"

Exactly increasingly … … …

Ah yes …. In advance check supports whether your machine these G-codes ….

+2

5

I would some that changed:

DESCRIPTION = "Axyz (*.nc)"
FILE_EXTENSION = "nc"
UNITS = MM
END_OF_LINE = " [13][10]"
LINE_NUM_START = 0
Line’s organs is NUM’s organs is increment = 1- step 10 - wasteful
Line’s organs is NUM’s organs is MAXIMUM = 9999999- ah and limit the number of lines for although would 10 million Me quite often had generate UE on 1.5 - 2 million Cadres
FORMAT = [N|@|N|1.0]
FORMAT = [S|@|S|1.0]
FORMAT = [F|#|F|1.1]
FORMAT = [X|#|X|1.1]
FORMAT = [Y|#|Y|1.1]
FORMAT = [Z|#|Z|1.1]
FORMAT = [XH|@|X|1.1]
FORMAT = [YH|@|Y|1.1]
FORMAT = [ZH|@|Z|1.1]
[FORMAT = [I|@|I|+1.3]
Format = [J|@|J|+1.3]
- and why here the accuracy of 1.3? If all a 1.1, then and here no need remove more precisely than 2 mark camping on’s 1.2. Or same 1.1
START = "%"
START = ":1 GDP"- here is certainly not need a line.
START = " [N]G40G17G80G49"
START = " [N]T1M6"
START = " [N]G90G54"
Start = "[N]G0[ZH]H1" - Don’t going to bother, actually, you already chose system coordinates G54, instead K43 (Rifle) boldly write on G0. You have same there is no avtosmeny tool and huge retailer?
START = " [N]G0 [XH][YH][S]M3"
RAPID_RATE_MOVE = " [N]G0 [X][Y][Z]"
FIRST_FEED_RATE_MOVE = " [N]G1 [X][Y][Z][F]"
FEED_RATE_MOVE = " [N][X][Y][Z]"
FIRST_CW_ARC_MOVE = " [N]G2 [X][Y][i][J][F]"
CW_ARC_MOVE = " [N]G2 [X][Y][i][J]"
FIRST_CCW_ARC_MOVE = " [N]G3 [X][Y][i][J][F]"
CCW_ARC_MOVE = " [N]G3 [X][Y][i][J]"
END = "G0 [ZH]"
End = "G0X [XH]Y [YH]M5" - a return not in X0Y0, and in point Home preset in ArtCAM and stop sign spindle, until Goes to Home, on practice, first deactivate spindle, then travels.
END = "M30"

And here is the accuracy of below 0.01 (less 2-'s signs after semicolon) in fields Format, I would does not pose. There's a step in 0.05 under processing planes on Z (for example 8.45 and 8.5) can be zmetna, even on the tree, although this already personal deal everyone.

0

6

Postprotsesor maximum under 2009
In 2010 there is function cut the circle with is smoother the descent of within the lines - what this post not ant it was sufficient
In now interpolation he this function not action will (stupidly not will tumble down between layers) but on usual - as on usual - lose the speed

Desirable everywhere promoted [N]to to see Number sink that tanker and in case what already know from far and-dance stuff out

Start = "([TOOLDESC])" - introduce tool (uploaded ing lu - and in sight that need to keep trotting out in frezer), and under a change of will in sight on that reverse

And why use at all G54, not for moreover it

Last edited by dizzyy (Sep 6 2011 21:35:06)

+1

7

dizzyy wrote:

postprotsesor maximum under 2009
In 2010 there is function cut the circle with is smoother the descent of within the lines - what this post not ant it was sufficient

Not all same have gone on 2010!

dizzyy wrote:

desirable everywhere promoted [N]

Already pertinent printout

dizzyy wrote:

START = "( [TOOLDESC])"

An excellent parameter :cool: +

dizzyy wrote:

and why use at all G54, not for moreover it

And if previous program was written manually and used other correction, and in mach3, for example G54 - the correction included by default, on how many I understand and not is switching off on equipped, and only can be its refocusing on G55, G56 and camping on D.
That would each time this not to control can be to leave, but, agree, not necessarily.

0

8

as-mechanic wrote:

not all same have gone on 2010!

But and some have gone

FIRST_CW_ARC_MOVE = " [N]G2 [X][Y][Z][i][J][F]"
CW_ARC_MOVE = " [N]G2 [X][Y][Z][i][J]"
;
FIRST_CCW_ARC_MOVE = " [N]G3 [X][Y][Z][i][J][F]"
CCW_ARC_MOVE = " [N]G3 [X][Y][Z][i][J]"

0

9

as-mechanic wrote:

[FORMAT = [I|@|I|+1.3]Format = [J|@|J|+1.3]- and why here the accuracy of 1.3? If all a 1.1, then and here no need remove more precisely than 2 mark camping on’s 1.2. Or same 1.1

In these of perhaps will need more than one a badge of after semicolon.

Ah I have is worth 2.

0

10

dizzyy wrote:

postprotsesor maximum under 2009v 2010 there is function cut the circle with is smoother the descent of within the lines - what this post not ant it was sufficient

lionkingofpersia wrote:

We'll take him the standard postprotsessor … .axyz.con
He is on address by default C:\ Program Files\ ArtCAM 2009\ postp\

And I 2009 and described.

as-mechanic wrote:

START = ":1 GDP" - here is certainly not need a line.

Here I agree this can be kill.

But then the most simple and credible enforcement postprotsessor looks so

DESCRIPTION = "axyz (*.NC)"
FILE_EXTENSION = "NC"
UNITS = MM
END_OF_LINE = " [13][10]"
LINE_NUM_START = 0
LINE_NUM_INCREMENT = 1
LINE_NUM_MAXIMUM = 9999999
FORMAT = [N|@|N|1.0]
FORMAT = [S|@|S|1.0]
FORMAT = [F|#|F|1.1]
FORMAT = [X|#|X|1.2]
FORMAT = [Y|#|Y|1.2]
FORMAT = [Z|#|Z|1.2]
FORMAT = [XH|@|X|1.2]
FORMAT = [YH|@|Y|1.2]
FORMAT = [ZH|@|Z|1.2]
START = "%"
START = "T1M6"
START = "G0 [ZH]"
START = "G0 [XH][YH][S]M3"
RAPID_RATE_MOVE = "G0 [X][Y][Z]"
FIRST_FEED_RATE_MOVE = "G1 [X][Y][Z][F]"
FEED_RATE_MOVE = " [X][Y][Z]"
END = "G0 [ZH]"
END = "G0X0Y0"
END = "M30"

Advantage minimal the size of the ing lu and works on any 45kW.

+2

11

Then so:

DESCRIPTION = "axyz (*.NC)"
FILE_EXTENSION = "NC"
UNITS = MM
END_OF_LINE = " [13][10]"
LINE_NUM_START = 0
LINE_NUM_INCREMENT = 1
LINE_NUM_MAXIMUM = 9999999
FORMAT = [N|@|N|1.0]
FORMAT = [S|@|S|1.0]
FORMAT = [F|#|F|1.1]
FORMAT = [X|#|X|1.2]
FORMAT = [Y|#|Y|1.2]
FORMAT = [Z|#|Z|1.2]
FORMAT = [XH|@|X|1.2]
FORMAT = [YH|@|Y|1.2]
FORMAT = [ZH|@|Z|1.2]
START = "%"
START = "( [TOOLDESC])"
START = "T1M6"
START = "G0 [ZH]"
START = "G0 [XH][YH][S]M3"
RAPID_RATE_MOVE = "G0 [X][Y][Z]"
FIRST_FEED_RATE_MOVE = "G1 [X][Y][Z][F]"
FEED_RATE_MOVE = " [X][Y][Z]"
END = "G0 [ZH]"
END = " G0X [XH]Y [YH]M5"
END = "M30"

Not always conveniently, to tool drove in X0Y0, and rights dizzyy, that conveniently initially UE have description of tool.

+1

12

Messrs. experts! And possibly whether ask silly questions on between ministries for pauermilla? Or for this need to create appropriate subject in appropriate section? Like as and here and there Delkam.
And problems with controlled for Power's even more, than for arta. Daktpost I so and not get through the opening credits. And here is in RR4.8 the beginning of something goes. Only "method tyka" perishing painful for be a big hassle. And most interesting begins after three axles. Very want starving writing posts.
P.S. I, naturally, am not pleading for me post ready bounce. This crude expressions. And here is push in some moments, where I probuksovyvayu, was would very nice.

Last edited by СерёгаЧПУшник (Sep 7 2011 11:07:09)

0

13

Here is postprotsesor

;
; Fanuc G - Code 4-Axis rotary post processor
;
; Linear Y Axis is wrapped onto A rotary axis
;

DESCRIPTION = "ZIG-T-2009 mm(*.tap)"
;
FILE_EXTENSION = "tap"
;
UNITS = MM
;
;
; Cariage return - line feed at end of each line
;
END_OF_LINE = " [13][10]"
;
; Block numbering
;
LINE_NUM_START = 0
LINE_NUM_INCREMENT = 1
LINE_NUM_MAXIMUM = 999999
;
; Set up default formating for variables
;
; Line numbering
FORMAT = [N|@|N|1.0]
; Spindle Speed
FORMAT = [S|@|S|1.0]
; Feed Rate
FORMAT = [F|#|F|1.0]
; Tool moves in x,y and z
FORMAT = [X|#|X|1.3]
FORMAT = [Y|#|Y|1.3]
FORMAT = [Z|#|Z|1.3]
; Arc Centre Cordinates
FORMAT = [I|@|I|1.3]
FORMAT = [J|@|J|1.3]
; Home tool positions
FORMAT = [XH|@|X|1.3]
FORMAT = [YH|@|Y|1.3]
FORMAT = [ZH|@|Z|1.3]
;
; Set up program header
;
START = "%"
START = "(------------------------------)"
START = "( [TOOLDESC])"
START = "(X MIN: [XMIN]Y MIN: [YMIN]Z MIN: [ZMIN])"
START = "(X MAX: [XMAX]Y MAX: [YMAX]Z MAX: [ZMAX])"
START = "(FEED RATES IN MM PER MINUTE) "
START = "(CUTTING FEED RATE: [FC])"
START = "(PLUNGE FEED RATE : [FP])"
START = "(RAPID FEED RATE : [FR])"
START = "(------------------------------)"
START = " [N]G90"
;S TART = " [N]G21"
; G20 = Use MM as unit value
START = " [N]G49"
START = " [N]T [T][TOOLDESC]"
;S TART = " [N]M6 T1"
; M6T1 = tool change via macros (commented out)
START = " [N]G0 [ZH]"
START = " [N]M1"
START = " [N]G0 [XH][YH][S]M3"
;S TART = " [N]M7"
; M7 = turn misting coolant on (commented out)
START = "(------------------------------)"
;
; Program moves
;
FIRST_RAPID_RATE_MOVE = " [N]G0 [X][Y][Z]"
FIRST_FEED_RATE_MOVE = " [N]G1 [X][Y][Z][F]"
FEED_RATE_MOVE = " [N][X][Y][Z]"
;
FIRST_CW_ARC_MOVE = " [N]G2 [X][Y][i][J][F]"
CW_ARC_MOVE = " [N]G2 [X][Y][i][J]"
;
FIRST_CCW_ARC_MOVE = " [N]G3 [X][Y][i][J][F]"
CCW_ARC_MOVE = " [N]G3 [X][Y][i][J]"
;
; End of file
;
END = " [N]G0 [ZH]"
END = " [N]G0 [XH][YH]"
END = " [N]M05"
END = " [N]M02"
END = "%"

TOOLCHANGE = " [N]M6 T [T][TOOLDESC]"

You must ask silly questions.

0

14

lionkingofpersia wrote:

you must ask silly questions.

This accurately worker post
On how many see he will issuing mistake under using 2 instruments (manual change tool)

lionkingofpersia wrote:

and I 2009 and described.

And can be to know difference between versions?
Post should be is quite universal

0

15

Tried to Google Trends volume index, find interpreter.
Alas, not worked.
Question 1. For what which controls noise.
Question 2. Post precent. For NC Sty. Can be adapt came, or as?
3 question to the propeller heads on killer question. You slide betray him? This in lichku.

0

16

Николаевич wrote:

The subject 1. For what which controls noise.
Question 2. Post precent. For NC Sty. You can specialize a came, or as?

Think that be appropriate to to most crossbars, for Mach - accurately be appropriate, NC-Studio - think, must explicit.

Николаевич wrote:

3 question to the propeller heads on killer question. You slide betray him? This in lichku.

Honestly say - got nailed.

lionkingofpersia wrote:

you must ask silly questions.

1. Under changing turning axis, there is no sense to change postprotsessor.
2. Too many an extra $symbols as and under inspection previous office.
3. Need whether on povorotke arc?
4. dizzyy- again rights, pro change tool.

dizzyy wrote:

in 2010 there is function cut the circle with is smoother the descent of within the lines - what this post not potyanetv now interpolation he this function not action will (stupidly not will tumble down between layers) but on usual - as on usual - lose the speed

Something me it beggars belief (not tested for lack 2010 version of - not need a was), that in kadrі with now category: Interpolation in level plane BMP (called G 17) will spelled out movement on Z, such-feint even more serious CAM system will not be able do!
And smooth lowering on draw an outline within in ArtCAM there is long. Centimeters Figure.

Zoom

Last edited by as-mechanic (Sep 7 2011 21:07:17)

0

17

This smooth vrezanie and I pro

For test you can I merely on work

Code:
%
N10 G90
N11 G49
N12 T1 (6.000 мм радиус цилиндрический фрезы)
N13 G0Z5.000
N14 M1
N15 G0X0.000Y0.000S15000M3
(------------------------------)
N17 G0 X15.888 Y47.299 Z5.000
N18 G1  Z0.000 F800
N19 G2X46.924Y78.496Z-0.625I31.112J0.085F1000
N20 G2X78.112Y47.451Z-1.250I0.076J-31.112
N21 G2X47.076Y16.254Z-1.875I-31.112J-0.086
N22 G2X15.888Y47.299Z-2.500I-0.076J31.112
N23 G2X46.924Y78.496Z-3.125I31.112J0.085
N24 G2X78.112Y47.451Z-3.750I0.076J-31.112
N25 G2X47.076Y16.254Z-4.375I-31.112J-0.086
N26 G2X15.888Y47.299Z-5.000I-0.076J31.112
N27 G2X46.924Y78.496Z-5.625I31.112J0.085
N28 G2X78.112Y47.451Z-6.250I0.076J-31.112
N29 G2X47.076Y16.254Z-6.875I-31.112J-0.086
N30 G2X15.888Y47.299Z-7.500I-0.076J31.112
N31 G2X46.924Y78.496Z-8.125I31.112J0.085
N32 G2X78.112Y47.451Z-8.750I0.076J-31.112
N33 G2X47.076Y16.254Z-9.375I-31.112J-0.086
N34 G2X15.888Y47.299Z-10.000I-0.076J31.112
N35 G2X46.924Y78.496Z-10.625I31.112J0.085
N36 G2X78.112Y47.451Z-11.250I0.076J-31.112
N37 G2X47.076Y16.254Z-11.875I-31.112J-0.086
N38 G2X15.888Y47.299Z-12.500I-0.076J31.112
N39 G2X46.924Y78.496Z-13.125I31.112J0.085
N40 G2X78.112Y47.451Z-13.750I0.076J-31.112
N41 G2X47.076Y16.254Z-14.375I-31.112J-0.086
N42 G2X15.888Y47.299Z-15.000I-0.076J31.112
N43 G2X46.924Y78.496Z-15.625I31.112J0.085
N44 G2X78.112Y47.451Z-16.250I0.076J-31.112
N45 G2X47.076Y16.254Z-16.875I-31.112J-0.086
N46 G2X15.888Y47.299Z-17.500I-0.076J31.112
N47 G2X46.924Y78.496Z-18.125I31.112J0.085
N48 G2X78.112Y47.451Z-18.750I0.076J-31.112
N49 G2X47.076Y16.254Z-19.375I-31.112J-0.086
N50 G2X15.888Y47.299Z-20.000I-0.076J31.112
N51 G2X46.924Y78.496I31.112J0.085
N52 G2X78.112Y47.451I0.076J-31.112
N53 G2X47.076Y16.254I-31.112J-0.086
N54 G2X15.888Y47.299I-0.076J31.112
N55 G0  Z5.000
N56 G0 X0.000 Y0.000 
N57 M05
N58 M02
%

Most coolest part in is that this chip emerged in 2010 on even in 2011 there postprotsessora with now category: Interpolation for smooth 5m - devise the have come up with (or with masters of Maca cocksucker's confiscated) and provide not can signing

Zoom

Last edited by dizzyy (Sep 8 2011 22:34:54)

0

18

dizzyy wrote:

for test you can I merely on work

Talk! Spiralnoe vrezanie works only under Roundtable produced profile?

0

19

But as to withdraw dimensions of details in cap of our? There is such experience? Mill lifts - here increasingly understandable. And overall size? There is something koldunstvo?

0

20

СерёгаЧПУшник wrote:

There are what something koldunstvo?

Here is cube:
START = "%"
START = "(------------------------------)"
START = "( [TOOLDESC])"
START = "(X MIN: [XMIN]Y MIN: [YMIN]Z MIN: [ZMIN])"
START = "(X MAX: [XMAX]Y MAX: [YMAX]Z MAX: [ZMAX])"
START = "(FEED RATES IN MM PER MINUTE) "
START = "(CUTTING FEED RATE: [FC])"
START = "(PLUNGE FEED RATE : [FP])"
START = "(RAPID FEED RATE : [FR])"
START = "(------------------------------)"

+1

21

Ranging this post, I governor intended help indeed understand, as is written simple postprotsessor.
To he worked using the main G-code, what there is in any a lathe … … … ah or almost in any … …. Tryokhosevom … … … on.

And already the extra touches can be promoted … … …

But times went such a a spree, you know … …. Proposal a simple …. Rewrite post do his modular … … …

This basic modules … ….
; Fanuc configuration file
;; Cariage return - line feed at end of each line
; Block numbering
; Set up default formating for variables
;; Line numbering
; Spindle Speed
; Feed Rate
; Tool moves in x,y and z
; Home tool positions
; Set up program header
; Program moves
; End of file

And knowing set of breaking which supports concrete machine can be muster postprotsessor under their needs … … ….

+1

22

as-mechanic wrote:

such-feint even more serious CAM system will not be able do!

Far from. Even in Cimco Edit with easily can be write UE for "scroll rastachivaniya", either for narezaniya a groove rezbofrezami. With inspection process was failing step spiral! And such a feature emerged ranging with the emergence of 5 th version of, and the first from 5-’ versions of emerged not year and not two ago!

0

23

iturup wrote:

not year and not two ago!

Means am behind.
With the help CIMCO UE not wrote, 'm using it simply as sometime-vizualizatorom. And in the rest of the, (in players little bad about molesting, not am confident until the end of) in PowerMill. Not know why, but smooth vrezanie on the circle, always there linearly (G1)

0

24

as-mechanic wrote:

. In NX (disambiguation) little bad about molesting.

And in players at all by default strategy and faster "on spiral", if not now touch, then automation manager will of hitting on spiral in appropriate strategies processing.
And in Simcoe once wrote part of UE for narezaniya a groove, for in players why something narezanie I have worked only whole number of coils of, and on conditions TK was - deaf there virtually take a careful to beneath the. And in Simcoe as times-??? and whilst narezanie from - and until - depth. And don't care how many coils of and that the latest part-. Yes still and the latest phase of in Simcoe extends until the circle!

Last edited by iturup (Sep 13 2011 22:59:25)

+1

25

as-mechanic wrote:

but smooth vrezanie on the circle, always there linearly (G1)

Smooth yes, and spiralnoe vrezanie through G2 should, so as 1930 describe circle and specify how for one phase of should will plummet (indeed fashionable to and through G1 but loss of in speed)
Mach like circle breaks down the on 4 parts of and not one string (I pro additions)

Most importantly that artkam take the bait, and mach not against

+1

26

iturup, dizzyyThanks.
Messrs., you not seems, that we had removed themselves from themes tube top?

0

27

as-mechanic wrote:

START = "[N]G0 [ZH]H1" - Don’t going to bother, actually, you already chose a set coordinates of G54, instead K43 (Rifle) boldly write on G0. You have same there is no avtosmeny tool and huge retailer?

But as be if change tool there is? Number tool listed from base (when were picked by tool, can be edit) as do, that would Number correction window with number tool?

Until've been composing post, came idea. Tried - works.
" [N]G0 [ZH]H [T]"

Emerged still question: Artkam in the title tool writes: ((Significance diameter) mm guidance rangescylindrical such), can be whether this long correct?

Last edited by StarPOM (Sep 23 2011 11:59:33)

0

28

And homilies in the title tool to point fingers not dozen and guidance ranges
For example is worth 6 mm, point to R =3 mm

0

29

Had a good days, forumchane. Machine works under machem3. Jeul Pan write in artkame 2008, postprotsessor "Mach2 mm (• .cnc)" machine his understands and all as would well, but in it there is no nor arches, nor now interpolation. And try want. Has tried postprotsessory "Mach3gb-MM-Arcs-ATC (• .TAP)", "Mach3gb-Arcs (MM) (• .TAP)", but under booting in totally dunked it late sixties what the through the a on all axes's-56000 y-46,000 more? Z-78900, under manual governance bumping any axis for example on 5mm totally dunked it shows displacement on 100mm, has tried reset a player's axis under inclusion UE for example's should get 7 Hmmm and he goes to 780 (with postprotsessorom "Mach2 mm (• .cnc)" all works correctly) and I have I have been toying around thought that all deal in postprotsessorakh.

Postprotsessor "Mach2 mm (• .cnc)"
; Who When What
; === ======== ========================================
; TM 04/07/95 Written
; BEM 06/08/96 Modified for Rotary Axis support
; BEM 19/06/00 Fixed
; BEM 03/02/00 Added description
; JVG 27/10/03 Modified for Mach2 controller, Wolverine3 or Elite6 machines
; JVG 12/12/03 Modified for Mach2 3axis machining
; JVG Feb 23 05 Small modifications with Bill P

DESCRIPTION = "Mach2 mm(*.cnc)"
;
FILE_EXTENSION = "cnc"
;
UNITS = MM
;
;
; Cariage return - line feed at end of each line
;
END_OF_LINE = " [13][10]"
;
; Block numbering
;
LINE_NUM_START = 0
LINE_NUM_INCREMENT = 1
LINE_NUM_MAXIMUM = 999999
;
; Set up default formating for variables
;
; Line numbering
FORMAT = [N|@|N|1.0]
; Spindle Speed
FORMAT = [S|@|S|1.0]
; Feed Rate
FORMAT = [F|#|F|1.0]
; Tool moves in x,y and z
FORMAT = [X|#|X|1.3]
FORMAT = [Y|#|Y|1.3]
FORMAT = [Z|#|Z|1.3]
; Home tool positions
FORMAT = [XH|@|X|1.3]
FORMAT = [YH|@|Y|1.3]
FORMAT = [ZH|@|Z|1.3]
;
; Set up program header
;
START = "%"
START = "G90"
;S TART = "G21"
; G20 = Use MM as unit value
START = "G49"
;S TART = "M6 T1"
; M6T1 = tool change via macros (commented out)
START = "M3 [S]"
;S TART = "M7"
; M7 = turn misting coolant on (commented out)
;
; Program moves
;
FIRST_RAPID_RATE_MOVE = "G0 [X][Y][Z]"
FIRST_FEED_RATE_MOVE = "G1 [X][Y][Z][F]"
FEED_RATE_MOVE = " [X][Y][Z]"
;
; End of file
;
END = "G0 [ZH]"
END = " [XH][YH]"
END = "M05"
END = "M02"
END = "%"

And postprotsessor "Mach3gb-MM-Arcs-ATC (• .TAP)"

; Mach3 PostP file arc moves in MM with ATC
;
; === ======== ========================================
;G W 3/14/08 created for Arc(MM) with toolchange
;
DESCRIPTION = "Mach3gb-MM-Arcs-ATC(*.TAP)"
;
FILE_EXTENSION = "TAP"
;
UNITS = MM
;
; Cariage return - line feed at end of each line
;
END_OF_LINE = " [13][10]"
;
; Spindle Speed
FORMAT = [S|@|S|1.0]
; Feed Rate
FORMAT = [F|#|F|1.0]
; Tool moves in x,y and z
FORMAT = [X|#|X|1.4]
FORMAT = [Y|#|Y|1.4]
FORMAT = [Z|#|Z|1.4]
; Arc Center Coords
FORMAT = [I|@|I|1.4]
FORMAT = [J|@|J|1.4]
; Home tool positions
FORMAT = [XH|@|X|1.4]
FORMAT = [YH|@|Y|1.4]
FORMAT = [ZH|@|Z|1.4]
;
; Tool Number
FORMAT = [T|@||1.0]
;
; Set up program header
;
START = "( [FILENAME])"
START = "G90"
; G90 = Set ABSOLUTE mode
START = "G21"
; G21 = Use MM as unit value
START = "G49"
; G49 = Cancel tool length offset
START = "M6 T [T]"
; M6T1 = tool change via macros
;
;S TART= " Tool Number: [T]"
;
START = "G0 [ZH]"
; G0 {ZH} = rapid to safe Z height
START = "M3 [S]"
; M3{S} = rotate spindle clockwise
;
; Program moves
;
FIRST_RAPID_RATE_MOVE = "G0 [X][Y][Z]"
;
FIRST_FEED_RATE_MOVE = "G1 [X][Y][Z][F]"
FEED_RATE_MOVE = " [X][Y][Z]"
;
FIRST_CW_ARC_MOVE = "G2 [X][Y][i][J][F]"
CW_ARC_MOVE = "G2 [X][Y][i][J]"
;
FIRST_CCW_ARC_MOVE = "G3 [X][Y][i][J][F]"
CCW_ARC_MOVE = "G3 [X][Y][i][J]"
;
;S etup Toolchange Commands
;
TOOLCHANGE = "G0 [ZH]"
TOOLCHANGE = "M5"
TOOLCHANGE = "M6 T [T]"
TOOLCHANGE = "M3 [S]"

; End of file
;
END = "G0 [ZH]"
END = "G0 [XH][YH]"
END = "M5"
; M5 = stop spindle
END = "M30"
; M30 = program end and rewind

Am asking suggest the that can be not so? Can exhorts while she postprotsessor for artkama2008 under mach3 by a closed-circuit category: Interpolation?

0

30

napas
Postprotsesor betterlanguages.com-T-2009 mm only slightly modified
This is interestingly

In the second here mistake (and can and at all need not)
FORMAT = [T]@| [T||1.0]

Last edited by dizzyy (Sep 28 2011 21:14:57)

+1

31

dizzyy wrote:

postprotsesor betterlanguages.com-T-2009 mm only slightly modified

Thank you, all everything will run without problems.

0

32

Ah and I'll do my under Much - http://narod.ru/disk/26772942001/Mach3Arc.rar.html
Wrote for one of forums, have him works, how I know. Truth can there that and excess there is, for example change tool. On khobbiynykh FVC moot now.

0

33

Greetings all =)
And can be whether recast in postprotsessor correction on guidance ranges tool?
Simply I serve with metal and tool has in having the morning =)
And if would can be was would introduce correction the word processing would has been conducted any instrument.
Easy the contours of I and himself write and here is its here is here artkamych I have in aid. A pity that only under opredellyonyy tool
Ah on example:

N600 T6L06 $ FREZA KONTSEV CHIST D20..21.5 Z =4 ..5
G0X-15Y-170
S315
Z3G43H06
G1Z-9.3M8 F200
G1G41 D016Y-181 F100 data's here D is the correction on guidance ranges tool 16
X615 F25
N610 G40Y-170 F100
N620 G41Y-159
N630 X-15 F25
G40Y-170 F100M9
Z3M5F500
G0G49Z200
M1
Here is how this slide it in postprotsessor?

0

34

Pardon Nuba Mountains. That such postprotsessor. Roughly without zamudreniy =)

0

35

Begginer wrote:

’ Nuba Mountains. That such postprotsessor. Roughly without zamudreniy =)

Postprotsessor this a text file. With his help program which generates UE (the managing path) for press correctly styles syntax language which understands program running the directly motors press. For example whom the need to to number sink ispolnyaemoy programs. Or interpolation has the other syntax. Or at all another the designation. In short this that the like converter.

0

36

dra123 wrote:

and can be whether recast in postprotsessor correction on guidance ranges tool?

Hardly. More accurately, the correction include in ArtKAMe can be, but as something records this works. Write UE in UNIGRAPHICS NX (disambiguation) - there such problems there is no with correction - all is famously works, but postprotsessor will have very write, and there it is not far such simple as in ArtKAMe, and is written in spetsutilite, and consists postprots from three files.

0

37

're trying. Correct Smokywood.

Cube code in section start.

START = "/*NAME: [COMMENT]*/"
START = "/*DIRECTORY: [PATHNAME]*/"
START = "/*FOR A BEAVER 26_AVST*/"
START = "/*UNITS: METRIC_mm */"
START = "/*TOOL: [TOOLPATHNAME]*/"

Igraytes.

Conceal need to find list variables for, let kama. There many. Tasty.

Last edited by lionkingofpersia (Oct 23 2011 14:11:39)

0

38

lionkingofpersia wrote:

're trying. Correct Smokywood.

This cube code from postprotsessora, which I wrote for his press which claimed 26AVST, either for forumchanina APPOoverwrite its postprots. Under MACh3.
Although, rather this purely my under which claimed camping on K. Only he requires the comments not in brackets.

Last edited by iturup (Oct 24 2011 00:27:20)

+1

39

A respected iturup. I and not claimed on authorship.
Simply put emphasis on good is really.
Sometimes pologaet. Bly makes his move,. In Jeul Pan.

This let professionally, conveniently, ah and talk.

And you the Pimlico plus.

Many hard start, nothing not know, not remember.
So cues this kind of are important and need.
On experience I’d say. To Chinese-program numerical control is faring Tape 3. 's sad program.
And here is week ago taught one pepper. Is a clever Malets. But as they worked. Scratched on 26 the beaver on Chishmins the contours of details. And you cutters manually dorezali.

I when saw. I plakal.

And in artkame not worked. Because being asked post processor.

Last edited by lionkingofpersia (Oct 24 2011 06:40:32)

0

40

Guys, question in next:
As known postprotsessor Artkama beats all trajectory on tiny distances might, the exception are on-my posloynye the raw operations.
Can be whether force on chistovye operations work his in corresponding arcs?

0

41

g-kod wrote:

postprotsessor Artkama beats all trajectory on tiny distances might

Have ArtKAMa there is no postprotsessora :yep: he him and not need. Postprotsessory there is TO looms in ArtKAMe. And their many. Precisely from postprots. Depends - will be whether be used round interpolation in ready UE for press. But functionally circle. Inter. Can be used only in 2D regime, camping on E. Under processing for example 3-D terrain deploy its cannot be. ???? not only in ArtKAMe, but and in any CAM-program. Unfortunately!

A respected lionkingofpersiayes I and not against! :) Moreover - pleased, if my efforts someone helped.
Incidentally, when I came on their current work, I, too, "plakal." After, as saw the remnants of programs that wrote my predecessors. Profoundly sad to see seize G54-G59, G2, G3, programs without change of tool. Even K43 (Rifle) I not saw nor never! And this Hua 8-1930 instruments in no clothing left! Still and traces such there, where I even and understand not can - as same their there "have dealt"? That tried to to do?

0

42

Addition. It is important. For bivera 26avl posts DSP subwoofer with unlock nc studio tried

On pultovom the beaver 26avl. Hua comment. UE program not works. 'm cleaning up looking. And increasingly works.

0

43

lionkingofpersia wrote:

.. UE program not works.

Ah likely signs / •. • / need to replace on ordinary brackets)

0

44

Question znaktokam 4 a. What postprotsessor choose your at the work you on 4 axis.

0

45

Had a good days. Expensive forumchane, Podskajite, in than my mistake.
Prochtal messages in topic, decided to "refine" postprotsessor for ArtKama, which came with presses is.
Was so:
DESCRIPTION = "NC-Studio (*.CNC)"
;
FILE_EXTENSION = "CNC"
;
UNITS = MM
;
; Cariage return - line feed at end of each line
;
END_OF_LINE = " [13][10]"
;
; Block numbering
;
LINE_NUM_START = 0
LINE_NUM_INCREMENT = 10
LINE_NUM_MAXIMUM = 999999
;
; Set up default formating for variables
;
; Line numbering
FORMAT = [N|@|N|1.0]
; Spindle Speed
FORMAT = [S|@|S|1.0]
; Feed Rate
FORMAT = [F|#|F|1.1]
; Tool moves in x,y and z
FORMAT = [X|#|X|1.3]
FORMAT = [Y|#|Y|1.3]
FORMAT = [Z|#|Z|1.3]
; Home tool positions
FORMAT = [XH|@|X|1.3]
FORMAT = [YH|@|Y|1.3]
FORMAT = [ZH|@|Z|1.3]
;
; Set up program header
;
START = "%"
START = "T1M6"
START = "G0 [ZH]"
START = "G0 [XH][YH][S]M3"
;
; Program moves
;
RAPID_RATE_MOVE = "G0 [X][Y][Z]"
FIRST_FEED_RATE_MOVE = "G1 [X][Y][Z][F]"
FEED_RATE_MOVE = " [X][Y][Z]"
;
; End of file
;
END = "G0 [ZH]"
END = "G0X0Y0"
END = "M30"

After corrections became so:

DESCRIPTION = "NC-Studio2 (*.nc)"
FILE_EXTENSION = "nc"
UNITS = MM
END_OF_LINE = " [13][10]"
LINE_NUM_START = 0
LINE_NUM_INCREMENT = 1
LINE_NUM_MAXIMUM = 9999999
FORMAT = [N|@|N|1.0]
FORMAT = [S|@|S|1.0]
FORMAT = [F|#|F|1.3]
FORMAT = [X|#|X|1.3]
FORMAT = [Y|#|Y|1.3]
FORMAT = [Z|#|Z|1.3]
FORMAT = [XH|@|X|1.3]
FORMAT = [YH|@|Y|1.3]
FORMAT = [ZH|@|Z|1.3]
FORMAT = [I|@|I|+1.3]
FORMAT = [J|@|J|+1.3]
START = "%"
START = " [N]G40G17G80G49"
START = " [N]T1M6"
START = " [N]G90G54"
START = " [N]G0 [ZH]"
START = " [N]G0 [XH][YH][S]M3"
RAPID_RATE_MOVE = " [N]G0 [X][Y][Z]"
FIRST_FEED_RATE_MOVE = " [N]G1 [X][Y][Z][F]"
FEED_RATE_MOVE = " [N][X][Y][Z]"
FIRST_CW_ARC_MOVE = " [N]G2 [X][Y][i][J][F]"
CW_ARC_MOVE = " [N]G2 [X][Y][i][J]"
FIRST_CCW_ARC_MOVE = " [N]G3 [X][Y][i][J][F]"
CCW_ARC_MOVE = " [N]G3 [X][Y][i][J]"
END = "G0 [ZH]"
END = "G0X0Y0"
END = "M30"

Under launch Artkam (2009 pro) betrays mistake:
Configurable Post Processor

File :N C-Studio
ConfigPost :S yntax error
Line 28
FIRST_CW_ARC_MOVE = FIRST_CW_ARC_MOVE = " [N]G2 [X][Y][i][J][F]"

0

46

Hello. Here is there is standard postprotsessory suitable under many species looms. For example for 2d frezirovki - 2d Convert DVD. For three-dimensional processing g-sode suited.
And Podskajite what there is the standard postprotsessor suitable to linear a. For 4 turning axis?

0

47

;
; Cariage return - line feed at end of each line
;
END_OF_LINE = " [13][10]"
;
; Block numbering
;
LINE_NUM_START = 0
LINE_NUM_INCREMENT = 10
LINE_NUM_MAXIMUM = 999999
;
; Set up default formating for variables
;
; Line numbering
FORMAT = [N|@|N|1.0]
; Spindle Speed
FORMAT = [S|@|S|1.0]
; Feed Rate
FORMAT = [F|#|F|1.0]
; Tool moves in x,y and z
FORMAT = [X|#|X|1.3]
FORMAT = [Y|#|Y|1.3]
FORMAT = [Z|#|Z|1.3]
; Home tool positions
FORMAT = [XH|@|X|1.3]
FORMAT = [YH|@|Y|1.3]
FORMAT = [ZH|@|Z|1.3]
;
; Tool Number
;F ORMAT = [T|@||1.0]
;
; Set up program header
;
START = "%"
;S TART = "O1248"
START = "G91 G28 Z0."
START = "G91 G28 X0. Y0."
START = "G17 G40 G49 G90"
START = "G92 X0. Y0. Z0."
START = "M00"
START = "M06"
START = "M14 [S]"
START = "G04 X3."
START = "G55 G00 G90 [XH][YH]"
START = "G43 H1 [ZH]"
START = "G17 G61 G90"
START = "G10.3"
;
; Program moves
;
RAPID_RATE_MOVE = "G00 [X][Y][Z]"
;
FIRST_FEED_RATE_MOVE = "G01 [X][Y][Z][F]"
FEED_RATE_MOVE = " [X][Y][Z]"
;
FIRST_CW_ARC_MOVE = "G02 [X][Y]R [Radius][F]"
CW_ARC_MOVE = "G02 [X][Y]R [Radius]"
;
FIRST_CCW_ARC_MOVE = "G03 [X][Y]R [Radius][F]"
CCW_ARC_MOVE = "G03 [X][Y]R [Radius]"
;
; Toolchange
;
;T OOLCHANGE = "G00G91G28Z0M09"
;T OOLCHANGE = "M01"
;T OOLCHANGE = "T [T]M6"
;T OOLCHANGE = "M03 [S]"
;T OOLCHANGE = "G54G90X0Y0"
;T OOLCHANGE = "G43 [ZH]H [T]M8"
;
; End of file
;
END = "G00 [XH][YH]"
END = "M15"
END = "M07"
END = "G11.3"
END = "G49 G40 G80"
END = "G91 G28 Z0"
END = "G91 G28 X0. Y0."
END = "M30"
END = "%"

Not can otduplitsya as his insert in artkam. Artkam 2008. Poiogite who than can

0

48

Hi, neves vstavilsya

;
; Kic Kin-2000 configuration file
;
; History
;
; Who When What
; === ======== ========================================
; BEM 01/04/94 Written
;
DESCRIPTION = "KIN-2000 v2 (*.nc)"
;
FILE_EXTENSION = "nc"
;
UNITS = MM
;
; Cariage return - line feed at end of each line
;
END_OF_LINE = " [13][10]"
;
; Block numbering
;
LINE_NUM_START = 0
LINE_NUM_INCREMENT = 10
LINE_NUM_MAXIMUM = 999999
;
; Set up default formating for variables
;
; Line numbering
FORMAT = [N|@|N|1.0]
; Spindle Speed
FORMAT = [S|@|S|1.0]
; Feed Rate
FORMAT = [F|#|F|1.0]
; Tool moves in x,y and z
FORMAT = [X|#|X|1.3]
FORMAT = [Y|#|Y|1.3]
FORMAT = [Z|#|Z|1.3]
; Home tool positions
FORMAT = [XH|@|X|1.3]
FORMAT = [YH|@|Y|1.3]
FORMAT = [ZH|@|Z|1.3]
;
; Tool Number
;F ORMAT = [T|@||1.0]
;
; Set up program header
;
START = "%"
;S TART = "O1248"
START = "G91 G28 Z0."
START = "G91 G28 X0. Y0."
START = "G17 G40 G49 G90"
START = "G92 X0. Y0. Z0."
START = "M00"
START = "M06"
START = "M14 [S]"
START = "G04 X3."
START = "G55 G00 G90 [XH][YH]"
START = "G43 H1 [ZH]"
START = "G17 G61 G90"
START = "G10.3"
;
; Program moves
;
RAPID_RATE_MOVE = "G00 [X][Y][Z]"
;
FIRST_FEED_RATE_MOVE = "G01 [X][Y][Z][F]"
FEED_RATE_MOVE = " [X][Y][Z]"
;
FIRST_CW_ARC_MOVE = "G02 [X][Y]R [Radius][F]"
CW_ARC_MOVE = "G02 [X][Y]R [Radius]"
;
FIRST_CCW_ARC_MOVE = "G03 [X][Y]R [Radius][F]"
CCW_ARC_MOVE = "G03 [X][Y]R [Radius]"
;
; Toolchange
;
;T OOLCHANGE = "G00G91G28Z0M09"
;T OOLCHANGE = "M01"
;T OOLCHANGE = "T [T]M6"
;T OOLCHANGE = "M03 [S]"
;T OOLCHANGE = "G54G90X0Y0"
;T OOLCHANGE = "G43 [ZH]H [T]M8"
;
; End of file
;
END = "G00 [XH][YH]"
END = "M15"
END = "M07"
END = "G11.3"
END = "G49 G40 G80"
END = "G91 G28 Z0"
END = "G91 G28 X0. Y0."
END = "M30"
END = "%"

0

49

GENDOSS57 wrote:

Hi, neves vstavilsya

Ah, so and need to was edit its message, or delete his.

GENDOSS57 wrote:

not can otduplitsya as his insert in artkam. Artkam 2008. Poiogite who than can

In bloknoe content save with enlargement .con
And put this faylik in daddy: C:\ Program Files\ ArtCAM 2008\ postp
Pesle what run ArtCAM.

+1

50

zoruk wrote:

contaminated launch Artkam (2009 pro) betrays mistake:
Configurable Post Processor
File :N C-Studio
ConfigPost :S yntax error
Line 28
FIRST_CW_ARC_MOVE   = FIRST_CW_ARC_MOVE      = " [N]G2 [X][Y][i][J][F]"


And, why in determining size [i]and [j]put +?
On pros and conditionally.

0

51

iturup wrote:

Precisely from postprots. Depends - will be whether be used round interpolation in ready UE for press. But functionally circle. Inter. Can be used only in 2D regime, camping on E. Under processing for example 3-D features tell you deploy its cannot be. ???? not only in ArtKAMe, but and in any CAM-program. Unfortunately!


Not quite so

Here I described, this question

Power Mill

In ArtCame, too, most

Last edited by xata1976 (Apr 8 2012 09:21:10)

0

52

xata1976 wrote:

not quite so

xata1976 wrote:

in ArtCame, too, most


Where example from ArtKAMa?

0

53

xata1976 wrote:

in ArtCame, too, most


I take words back, has not taken that posts for artkama primitive and team G16, called G 17, G18 and G19 used for choice level plane, on which is conducted round interpolation, compensation long crested tool, and camping on D. Not are being withdrawn.

0

54

Respected forumchane urgently need to. As occasionally in postprotsessore to to by the general the next format: For example Kh3652 Y14896 Z7845 (in totally dunked it 3 this looks so Kh36.52 U148.96 Z78.45).
This need for system 2S42-65, the accuracy of until-hundredths millimeters.

FORMAT = [X|#|X|1.3]
FORMAT = [Y|#|Y|1.3]
FORMAT = [Z|#|Z|1.3]

What meaning need to place in brackets.
Thank you.

0

55

Kadyr wrote:

FORMAT = [X|#|X|1.3]
FORMAT = [Y|#|Y|1.3]
FORMAT = [Z|#|Z|1.3]


"3" take over for on "2." This number of signs after point.

0

56

Greetings all
Help pick a postprotsessor for press with turning hinge
There is X .Z and turning axis instead Y
UE running an in Artkame, machine is governed by in Ncstudio

One a good man me sent worker postprotsesor from its press
But have him turning axis instead X and I have instead Y
Has tried edit postprotsessor
Nothing not is obtained Ncstudio betrays mistake, either simply hangs out computer's a hunk under sham
Am asking watch where my mistake

Here is the original of the, ing lu preserved in this postprotsessore easily is a Ncstudio, shows involving, machine downward
But povorotka instead's

;A zazello postpr

DESCRIPTION = "Azazello_Rotary (X-axis) (*.nc)"
;
FILE_EXTENSION = "nc"
;
UNITS = MM
;
; Rotary axis control – Wrap X axis moves onto rotary axis
;
ROTARY_AXIS = X
;
; Cariage return - line feed at end of each line
;
END_OF_LINE = " [13][10]"
;
; Line numbering (Block numbering)
;
LINE_NUM_START = 0
LINE_NUM_INCREMENT = 10
LINE_NUM_MAXIMUM = 999999
;
; Set up default formating for variables
;
FORMAT = [N|@|N|1.0]
; Spindle Speed
FORMAT = [S|@|S|1.0]
; Feed Rate
FORMAT = [F|@||1.0|0.0166]
; Tool moves in x,y and z
FORMAT = [X|#|X|1.3]
FORMAT = [R|#|X|1.3]
FORMAT = [Y|#|Y|1.3]
FORMAT = [Z|#|Z|1.3]
; Home tool positions
FORMAT = [XH|@|X|1.3]
FORMAT = [RH|@|X|1.3]
FORMAT = [YH|@|Y|1.3]
FORMAT = [ZH|@|Z|1.3]
;
; Set up program header
;
START = "%"
START = "T1M6"
START = "G0 [ZH]"
START = "G0 [RH][YH][S]M3"
;
; Program moves
;
RAPID_RATE_MOVE = "G0 [R][Y][Z]"
FIRST_FEED_RATE_MOVE = "G1 [R][Y][Z][F]"
FEED_RATE_MOVE = " [R][Y][Z]"
;
; End of file
;
END = "G0 [ZH]"
END = "G0R0Y0"
END = "M30"

Here is I a bit revised, tried to do for povorotki instead Y
Jeul Pan preserved in this postprotsessore
Not is a, not shows involving, and not downward on 45kW

;A zazello postpr

DESCRIPTION = "Azazello_Rotary (X-axis) (*.nc)"
;
FILE_EXTENSION = "nc"
;
UNITS = MM
;
; Rotary axis control – Wrap X axis moves onto rotary axis
;
ROTARY_AXIS = Y
;
; Cariage return - line feed at end of each line
;
END_OF_LINE = " [13][10]"
;
; Line numbering (Block numbering)
;
LINE_NUM_START = 0
LINE_NUM_INCREMENT = 10
LINE_NUM_MAXIMUM = 999999
;
; Set up default formating for variables
;
FORMAT = [N|@|N|1.0]
; Spindle Speed
FORMAT = [S|@|S|1.0]
; Feed Rate
FORMAT = [F|@||1.0|0.0166]
; Tool moves in x,y and z
FORMAT = [X|#|X|1.3]
FORMAT = [R|#|Y|1.3]
FORMAT = [Z|#|Z|1.3]
; Home tool positions
FORMAT = [XH|@|X|1.3]
FORMAT = [RH|@|Y|1.3]
FORMAT = [ZH|@|Z|1.3]
;
; Set up program header
;
START = "%"
START = "T1M6"
START = "G0 [ZH]"
START = "G0 [RH][YH][S]M3"
;
; Program moves
;
RAPID_RATE_MOVE = "G0 [R][Y][Z]"
FIRST_FEED_RATE_MOVE = "G1 [R][Y][Z][F]"
FEED_RATE_MOVE = " [R][Y][Z]"
;
; End of file
;
END = "G0 [ZH]"
END = "G0R0Y0"
END = "M30"

0

57

If me axis on axis the all to change need to

DESCRIPTION = "Azazello_Rotary (X-axis) (*.nc)"
;
FILE_EXTENSION = "nc"
;
UNITS = MM
;
; Rotary axis control – Wrap X axis moves onto rotary axis
;
ROTARY_AXIS = Y
;
; Cariage return - line feed at end of each line
;
END_OF_LINE = " [13][10]"
;
; Line numbering (Block numbering)
;
LINE_NUM_START = 0
LINE_NUM_INCREMENT = 10
LINE_NUM_MAXIMUM = 999999
;
; Set up default formating for variables
;
FORMAT = [N|@|N|1.0]
; Spindle Speed
FORMAT = [S|@|S|1.0]
; Feed Rate
FORMAT = [F|@||1.0|0.0166]
; Tool moves in x,y and z
FORMAT = [X|#|X|1.3]
FORMAT = [R|#|X|1.3]
FORMAT = [Y|#|Y|1.3]
FORMAT = [Z|#|Z|1.3]
; Home tool positions
FORMAT = [XH|@|X|1.3]
FORMAT = [RH|@|X|1.3]
FORMAT = [YH|@|Y|1.3]
FORMAT = [ZH|@|Z|1.3]
;
; Set up program header
;
START = "%"
START = "T1M6"
START = "G0 [ZH]"
START = "G0 [RH][XH][S]M3"
;
; Program moves
;
RAPID_RATE_MOVE = "G0 [R][X][Z]"
FIRST_FEED_RATE_MOVE = "G1 [R][X][Z][F]"
FEED_RATE_MOVE = " [R][X][Z]"
;
; End of file
;
END = "G0 [ZH]"
END = "G0R0X0"
END = "M30"

0

58

START = "%"
START = " :1 248"
START = " [N]G91G28X0Y0Z0"
START = " [N]G40G17G80G49"
START = " [N]T1M6"
START = " [N]G90G54"
START = " [N]G43 [ZH]H1"
START = " [N]G0 [XH][YH][S]M3"

Explain the teapot please - how I understood in this search team motorway M3replies for launch spindles, why then in different postprotsessorakh figure in this team is changing - type M5 or'm looking for the M8, on that this affects?

0

59

Nomad wrote:

explain the teapot please - how I understood in this search team motorway M3 replies for launch spindles, why then in different postprotsessorakh figure in this team is changing - type M5 or'm looking for the M8, on that this affects?

In different struts meaning breaking can several differ.
Usually, M5 - disconnection spindles, motorways M8 - the inclusion of cooling.

+1

60

as-mechanic wrote:

In different struts meaning breaking can several differ.
Usually, M5 - disconnection spindles, motorways M8 - the inclusion of cooling.


END = "[N]M30"- and wasn not this disconnection spindles?

0

61

Nomad wrote:

END = "[N]M30" - and wasn not this disconnection spindles?

There is no, this stop sign programs, a return to the early. As collateral effekt- turns off spindle.

0

62

Podskajite, please, can be whether get rid of there in late programs, which brings machine in domestic stance?
Even if this not set in postprotsessore, he increasingly would still is deduced in UE.
And can be whether instead there in which is deduced rise on safe levels (for example G0Z20) ask its string?

Last edited by kotbarsik (Jul 10 2012 16:46:15)

0

63

kotbarsik wrote:

Say, is, please, can be whether get rid of there in krntse programs, which brings machine in domestic stance?
Even if this not set in postprotsessore, he increasingly would still is deduced in UE.
And can be whether instead there in which is deduced rise on safe levels (for example G0Z20) ask its string?

Opening Jeul Pan in notepad and edit so as need. And here is with upswings on bezopastnuyu levels I try to put not to experiment (such expensive).

0

64

label
As you responded on my question? You simply want to garner lot more messages?

0

65

lionkingofpersia wrote:

Don’t lack movements on zygomatic arches … ….
But this different story … … …. Vell … …. 'll tell ….

Need add bloc

FORMAT = [I|@|I|+1.3]
FORMAT = [J|@|J|+1.3]

And bloc

FIRST_CW_ARC_MOVE      = " [N]G2 [X][Y][i][J][F]"
CW_ARC_MOVE            = " [N]G2 [X][Y][i][J]"
;
FIRST_CCW_ARC_MOVE     = " [N]G3 [X][Y][i][J][F]"
CCW_ARC_MOVE           = " [N]G3 [X][Y][i][J]"

Tickles

;
DESCRIPTION = "Axyz (*.nc)"
FILE_EXTENSION = "nc"
UNITS = MM
END_OF_LINE = " [13][10]"
LINE_NUM_START     = 0
LINE_NUM_INCREMENT = 10
LINE_NUM_MAXIMUM   = 999999
FORMAT = [N|@|N|1.0]
FORMAT = [S|@|S|1.0]
FORMAT = [F|#|F|1.1]
FORMAT = [X|#|X|1.1]
FORMAT = [Y|#|Y|1.1]
FORMAT = [Z|#|Z|1.1]
FORMAT = [XH|@|X|1.1]
FORMAT = [YH|@|Y|1.1]
FORMAT = [ZH|@|Z|1.1]
FORMAT = [I|@|I|+1.3]
FORMAT = [J|@|J|+1.3]
START = "%"
START = " :1 248"
START = " [N]G40G17G80G49"
START = " [N]T1M6"
START = " [N]G90G54"
START = " [N]G43 [ZH]H1"
START = " [N]G0 [XH][YH][S]M3"
RAPID_RATE_MOVE        = " [N]G0 [X][Y][Z]"
FIRST_FEED_RATE_MOVE   = " [N]G1 [X][Y][Z][F]"
FEED_RATE_MOVE         = " [N][X][Y][Z]"
FIRST_CW_ARC_MOVE      = " [N]G2 [X][Y][i][J][F]"
CW_ARC_MOVE            = " [N]G2 [X][Y][i][J]"
FIRST_CCW_ARC_MOVE     = " [N]G3 [X][Y][i][J][F]"
CCW_ARC_MOVE           = " [N]G3 [X][Y][i][J]"
END = "G0 [ZH]"
END = "G0X0Y0"
END = "M30"

Exactly increasingly … … …

Ah yes …. In advance check supports whether your machine these G-codes ….

Where mistake?
http://s1.uploads.ru/t/ZaWlz.jpg
In folder postprotsessorov file Mach2’s organs is mm1.con not there is.

0

66

Perhaps a badge of "+."

0

67

kotbarsik wrote:

Even if this not set in postprotsessore, he increasingly would still is deduced in UE.

Cannot be, Unfortunately.

kotbarsik wrote:

And can be whether instead there in which is deduced rise on safe levels (for example G0Z20) ask its string?

In postprotsessore for this replies line
END = "G0 [ZH]"
Under scale UE zadavayte meaning safe Z, which you suitable for.

JIEXA wrote:

where mistake?

kotbarsik wrote:

a badge of "+."

Should be
FORMAT = [I|@|I|1.3]
FORMAT = [J|@|J|1.3]

JIEXA wrote:

in the folder postprotsessorov file Mach2’s organs is mm1.con not there is.

This applies to postprotsessoru, have which there is such a line:
DESCRIPTION = "Mach2_mm1"
Name of the file can be other.

0

68

as-mechanic
Pro safe levels, not many not so me understood. After every passage, circumvent circuit and camping on D. Before some position gaps on G0 in the next point tool exits on safe levels (again same in post CPU nor as not is configured), here is me and interested in nelzyali as get rid of this there or replace on its (through post processor, edit in notepad I becomes), what you wrote - this departure in domestic stance in late programs.

0

69

kotbarsik wrote:

here is me and interested in nelzyali as get rid of this there or replace on its (through post processor, edit in notepad I becomes)

Safe high that obvious when drafting which controls programs. Postprotsessor here not ????.
Still can be simply open Jeul Pan in notepad and replace all the premier. Feel more comfortable edit with the help programs Bred3.

Last edited by beckson (Jul 10 2012 22:02:23)

0

70

kotbarsik wrote:

the that you wrote - this departure in domestic stance in late programs

becksonyou responded correctly.

beckson wrote:

65th high that obvious when drafting which controls programs. Postprotsessor here not ????.

.
Under postprotsessirovanii safe Z wiping out as part of trajectory, so in postprotsessorakh is participating only Z [H]- (Home Z)

0

71

as-mechanic
Note, I specifically made screen with page Forum. I.e. on Forum in really mistake is obtained? This the first.
The second, this the premier DESCRIPTION = "Mach2’s organs is MM1" there is no nor in one file, total Commander checked entire folder artkama, to the same this mistake somehow this after reinstall artkama at all. In than on the door frame?

0

72

JIEXA wrote:

i.e. on Forum in really mistake is obtained?

Is obtained.

JIEXA wrote:

this the premier DESCRIPTION = "Mach2’s organs is MM1" there is no nor in one file, total Commander checked entire folder artkama, to the same this mistake somehow this after reinstall artkama at all.

Note, that ArtCAM conditionally on postprotsessor containing in the title "Mach2’s organs is MM1", based on your same skrine.

JIEXA wrote:

in than on the door frame?

Delete all files postprotsessorov, except gcode’s organs is mm.con from folders .Program Files\ ArtCAM # # # #\ postp\, after this try launch ArtCAM

0

73

as-mechanic wrote:

delete all files postprotsessorov, except gcode’s organs is mm.con from folders .Program Files\ ArtCAM # # # #\ postp\, after this try launch ArtCAM

Deleted all files from folders\ postp, except config.dll, emerges this same mistake, deleted config.dll and write in this folder gcode’s organs is mm.con, under preserving UE there is no postprotsessorov at all. Apparently config.dll for this and replies.

0

74

JIEXA wrote:

deleted all files from folders\ postp, except config.dll, emerges this same mistake, deleted config.dll and write in this folder gcode’s organs is mm.con, under preserving UE there is no postprotsessorov at all. Apparently config.dll for this and replies.

Try another version of

0

75

Here is such a question real quick - under creating UE always used postprotsessor, which came with to my "Woodpecker HS1318", I there and not climbed - works, ah and all righty, and here decided to I merely. And compared to standard Axyz, he me appeared slightly emasculating, charitably. In general request to to the propeller heads - watch and learn its verdict, and the me doubts used to munch on:

;
; G - Code configuration file
;
;
; ===================================================
;
; ===================================================
;
DESCRIPTION = "woodpecker_ME_II_4242 (mm) (*.U00)"
;
FILE_EXTENSION = "U00"
;
UNITS = MM
;
; Cariage return - line feed at end of each line
;
END_OF_LINE = " [13][10]"
;
; Block numbering
;
LINE_NUM_START = 0
LINE_NUM_INCREMENT = 10
LINE_NUM_MAXIMUM = 999999
;
; Set up default formating for variables
;
; Line numbering
FORMAT = [N|@|N|1.0]
; Spindle Speed
FORMAT = [S|@|S|1.0]
; Feed Rate
FORMAT = [F|#| F|1.0]
; Tool moves in x,y and z
FORMAT = [X|#| X|1.2]
FORMAT = [Y|#| Y|1.2]
FORMAT = [Z|#| Z|1.2]
; Home tool positions
FORMAT = [XH|@|X|1.1]
FORMAT = [YH|@|Y|1.1]
FORMAT = [ZH|@|Z|1.1]
;
; Set up program header
;
START = "01"
START = "S1000 M3"
START = "G0 G90 G54 [XH][YH]"
START = "G43 H1 [ZH]M8"
;
; Program moves
;
RAPID_RATE_MOVE = "G0 [X][Y][Z]"
FIRST_FEED_RATE_MOVE = "G1 [X][Y][Z][F]"
FEED_RATE_MOVE = " [X][Y][Z]"
;
; Setup Toolchange commands
;
TOOLCHANGE = " [N]T [T]M6"
TOOLCHANGE = " [N][S]M03"
;
; End of file
;
END = "M17"
END = "M30"
END = "%"

0

76

Nomad wrote:

learn its verdict

He has no 4 axis and he in my not lifts arc (G02 G03)

0

77

Nomad wrote:

In general request to to the propeller heads - watch and learn its verdict


You themselves give the response to its same question:

Nomad wrote:

I there and not climbed - works, ah and all righty


You a normal postprotsessor.
In purposes warm up the, of course, can be over him the freaky stuff, huh, and sense?
Something specifically want reverse? Or something not suits?

0

78

as-mechanic wrote:

you themselves give the response to its same question:

You a normal postprotsessor.
In purposes warm up the, of course, can be over him the freaky stuff, huh, and sense?
Something specifically want reverse? Or something not suits?


Yes I and himself not know, after as to faIl the settings in NC-Studio have been arguing force machine work correctly. Here is and lezu perhaps even there where do not cost would. Have been arguing method exceptions find reason small wingding. Machine began strange themselves to wage on corresponding arcs, has become tilting in eyes the vibrancy, especially in moment change of direction of rotation of Managing hinge Wu engine, an etching remain traces on lateral surfaces, before I for him such a like not noticing. Although in principle this may be from-for play screw couples.

0

79

Podskajite who can write postprotsessor for Artkam on with a vertical milling center multikam 1,000! Very need.

0

80

Nomad wrote:

yes I and himself not know, after as to faIl the settings in NC-Studio have been arguing force machine work correctly. Here is and lezu perhaps even there far not cost would. Have been arguing method exceptions find reason small wingding. Machine began strange themselves to wage on corresponding arcs, has become tilting in eyes the vibrancy, especially in moment change of direction of rotation of Managing hinge Wu engine, under textures remain traces on lateral surfaces, before I for him such a like not noticing. Although in principle this may be from-for play screw couples.

Think, that in sletevshikh settings postprotsessor not is to blame. And conclusion arches, by and large, on the softness work press should not affect, except any any extreme cases on high liquid molecules.
The vibrancy can emerge, if too large acceleration, sufficient, to the caret entered resonance with deep engine. GOLDCITY the settings, should all be fine.

0

81

Who can help? Need postprotsessor for ArtCam under machining center Busellato Jet Optima Alcoa and what is the price issue? :glasses:

0

82

There is the problem, and in than deal not gather additionally in any way. Running an in ArtCame 11 the mill sample circle or squaring. Retain trajectory any postprotsessorom Mach. If then zapusti processing in Mach3, then if the sample fulfilled for one Passage - all in annualized rate, But if the depth of requires several cycles of processing. The the next proluchennye profiles are shifting relatively first the aisle and relatively each other. In than the problem in postprotsessore or in a lathe?

0

83

MX #82 wrote:

Podskajite who can write postprotsessor for Artkam on with a vertical milling center multikam 1,000! Very need.


Here is 3 postprotsessora for Multicam: http://narod.ru/disk/62355582001.8720623c20f02a6f9d1173a02494090f/Постпроцессоры.rar.html
Homilies, can that the analogy.

Last edited by Борис (Oct 12 2012 00:27:02)

0

84

Proposals to my problem, I so understand, not will

0

85

Calambuuur wrote:

In than the problem in postprotsessore or in 45kW?

Podkrepite question screenshots with were scale trajectory, texts UE, and postprotsessorom.

0

86

Calambuuur wrote:

There are the problem, and in than deal not gather additionally in any way

Can be deal in feed Edgar Froese. Every footprint. Passage should not going for zone processing (not cutting of). Therefore every more deep Passage will awaken further from zone with topping center.
Try find squaring tsilіndrichnіy frezoy. If – my assumption not surest, then see Bly makes his move, as-with :dontknow:

0

87

as-mechanic wrote:

Calambuuur wrote (and):

In than the problem in postprotsessore or in, but?

Podkrepite question screenshots with were scale trajectory, texts Jeul Pan, and postprotsessorom.
Signature author
"" The sky in diamonds emerges only after quality strike about land "
Astrology amendment together over "
A. Belyanin

And, that such parameters scale trajectory? Else understandable

0

88

blin_goreliy wrote:

Calambuuur wrote (and):

There is the problem, and in than deal not gather additionally in any way

Can be deal in feed Edgar Froese. Every footprint. Passage should not going for zone processing (not cutting of). Therefore every more deep Passage will awaken further from zone with topping center.
Try find squaring tsilіndrichnіy frezoy. If – my assumption not surest, then see Bly makes his move, as-with

Stuck! This very thinly but think correctly camping on E. Need correctly choose tool. Yes?

0

89

Calambuuur wrote:

A, that such parameters scale trajectory? Else understandable

What initial data were asked for scale trajectory?
What rotating blade, step processing on vertically, which, pripusk, posed whether pripusk and which the final the aisle?

0

90

Perhaps better was here write, accidentally wrote in subject: "Techniques work with reliefs". I have question on postprotsessoru, there is have someone machine SCM Tech "Z2 (Xilog)?
Can be reverse data which value in G0 from artkama?

0

91

Dobryi day!

Do post for Rolanda with turning hinge. Podskajite as the rate "By" automatically drive in post?
Now before path for Jeul Pan editing post, serially this the rate judging by their diameter templates, for example, D zagot = 40 mm. Believe 40 • 3,1416 (PI) = 125,664 mm (the length of the the circle). Forth 360 / 125,664 = 2,8647. So each time, when is changing dozen billets.
.
FORMAT = [Y|#| A|0.005|2.8647]
; In overhead line Format = [Y|#| A|0.005|"K"]K =3 60 / length evolvent

0

92

Line betrays submission in mm per minute, as force show mm / seok? On FVC NSPF "Cemil" command in mm / seok

Start = "REM (airfoil applying mm per minute)"
START = "REM(CUTTING FEED RATE: [FC])"
START = "REM(PLUNGE FEED RATE : [FP])"
START = "REM(RAPID FEED RATE : [FR])"

0

93

DEL

Last edited by JIEXA (Aug 14 2013 15:59:51)

0

94

JIEXA wrote:

Artkam creates g-code and writes in file team F180000, me such a the speed not need a, account for each time in manual to rule, as align to was as need to, where seek?


Change the speed applying in the parameters tool (in ArtCam) on achieve escape.

0

95

Bountiful time days guys, participants Forum
Such question machine Scandinvent of the C4
Worked and nurtured UE in Vcarve, decided to to 400 and pereyte on Artcam 2010
Together with presses is gave here is such postprotsessor
+================================================
+
+ Mach2/3 - Vectric machine output configuration file
+
+================================================
+
+ History
+
+ Who When What
+ ======== ========== ===========================
+ Tony 15/11/2005 Written
+================================================

POST_NAME = "CnCutC4 (mm) (*.txt)"

FILE_EXTENSION = "tap"

UNITS = "MM"

+------------------------------------------------
+ Line terminating characters
+------------------------------------------------

LINE_ENDING = " [13][10]"

+------------------------------------------------
+ Block numbering
+------------------------------------------------

LINE_NUMBER_START = 0
LINE_NUMBER_INCREMENT = 10
LINE_NUMBER_MAXIMUM = 999999

+================================================
+
+ Formating for variables
+
+================================================

VAR LINE_NUMBER = [N|A|N|1.0]
VAR SPINDLE_SPEED = [S|A|S|1.0]
VAR FEED_RATE = [F|C|F|1.1]
VAR X_POSITION = [X|C|X|1.3]
VAR Y_POSITION = [Y|C|Y|1.3]
VAR Z_POSITION = [Z|C|Z|1.3]
VAR X_HOME_POSITION = [XH|A|X|1.3]
VAR Y_HOME_POSITION = [YH|A|Y|1.3]
VAR Z_HOME_POSITION = [ZH|A|Z|1.3]

+================================================
+
+ Block definitions for toolpath output
+
+================================================

+---------------------------------------------------
+ Commands output at the start of the file
+---------------------------------------------------

begin HEADER

"( [TOOLPATH_NAME])"
"( Mach2/3 Postprocessor )"
"G52X0Y0"
"M06T [T]"
"M03 [S]"

+---------------------------------------------------
+ Commands output for rapid moves
+---------------------------------------------------

begin RAPID_MOVE

" [N]G00 [X][Y][Z]"

+---------------------------------------------------
+ Commands output for the first feed rate move
+---------------------------------------------------

begin FIRST_FEED_MOVE

" [N]G01 [X][Y][Z][F]"

+---------------------------------------------------
+ Commands output for feed rate moves
+---------------------------------------------------

begin FEED_MOVE

" [N][X][Y][Z]"

+---------------------------------------------------
+ Commands output at the end of the file
+---------------------------------------------------

begin FOOTER

"G00 [ZH]"
"G00 [XH][YH]"
"M05"
"G52X0Y0"
"M6T0"
"M30"
%

But as his shift in Artcam enlargement in Vcarve • .pp and in Artcame • .Con simply edit in notepad and put enlargement .Con? And at all in a nutshell write what there is opportunities, camping on’s operations fulfill on this postprotsessoru. Machine tryokhosevoy.
Large Thanks for Sharing (understanding of) not shout and not the cutscene only getting my bearings here)

0

96

've tried a s name. Artcam conditionally. Paranoiac mistake

0

97

Lakers wrote:

've tried a s name. Artcam conditionally. Paranoiac mistake

Ah syntax, of course a bit differs. Other other postprotsessory and molitvakh on analogies. Deal not difficult.
Ah, and, of course, not cost nothin 'I to familiarize themselves with leadership on postrotsessoram ArtCAM.

0

98

Thanks for Sharing (advice, and even a question real quick I have in postprotsessore there teams
"Lacks movements on zygomatic arches … ….
But this different story … … …. Vell … …. 'll tell ….
Need add bloc
FORMAT = [I|@|I|+1.3]
FORMAT = [J|@|J|+1.3]
And bloc
FIRST_CW_ARC_MOVE = " [N]G2 [X][Y][i][J][F]"
CW_ARC_MOVE = " [N]G2 [X][Y][i][J]"
;
FIRST_CCW_ARC_MOVE = " [N]G3 [X][Y][i][J][F]"
CCW_ARC_MOVE = " [N]G3 [X][Y][i][J]"
And check supports whether your machine these G-codes
As precisely can be test their?
Without these teams I so understand the figures not do? T. To not will movement on zygomatic arches?

0

99

Lakers wrote:

as precisely can be test their?
Without these teams I so understand the figures not do? T. To not will movement on zygomatic arches?

Ah if there is no expenditure to the barre, then why-would not launch a test program with circular interpolyatsiyami on 45kW? If laps interpolation not are buoyed by controller, then, obviously, this immediately lagging. Use krugovykh interpolyatsiy not necessarily. They are put only under 21 / 2-D-processing. But can be remove UE and through postprotsessor without krugovykh interpolyatsiy - only UE will longer than the.

0

100

Thank you, tomorrow in Artcame stuck create a small piece of software with commercialization any thread the raised figures and “Services under postprotsessorom Mach3 arc mm (in library). And stuck launch on 45kW. Or change my the standard post processor and to 400 his export in artcam and then already jurisprudence as? (Ah this option I think will longer) - =)

0


You are here » Forum clan ChPUshnikov » All on ArtCAM » Write on postprotsessor under their needs (Razbiraem on spare parts collect)